1. Introduction
Thank you for choosing the GuliKit KK3 Pro Gamepad. This advanced controller is designed to enhance your gaming experience across multiple platforms, including Windows, Nintendo Switch, Android, and iOS. Featuring Hall Effect joysticks and triggers, a custom Gpower CPU, and a patented Maglev Vibration Motor, the KK3 Pro offers precision, responsiveness, and customizable features. Please read this manual carefully to ensure proper setup and optimal use of your new gamepad.

2. Package Contents
Please check the box for the following items:
- GuliKit KK3 Pro Gamepad
- USB-C Charging/Data Cable
- Rear Paddles (2 metal paddles are offered)
- PC Button Kit (Offered)
- Hyperlink Adapter (Offered, for 1000Hz wireless polling rate on PC)
- User Manual (PDF version available at GuliKit KK3 PRO User Manual PDF)
3. Setup
3.1 Controller Layout
The GuliKit KK3 Pro Gamepad features the following key components:
- Controller Mode LED: Indicates the current operating mode.
- USB-C Port: Used for charging and wired connections.
- Player Number LED: Indicates the player number.
- Mode Button: Double-click to change mode. Long press for power off, short press for power on.
- SYNC Button: Long press for 2 seconds to start scrolling LEDs for pairing.
- Rear Paddles (G1, G2, G3, G4): Customizable back buttons.
- Setting Button (Gear icon): Used for special function configurations.
3.2 Charging the Controller
Connect one end of the provided USB-C cable to the controller's USB-C port and the other end to a USB power source (e.g., computer, wall adapter). The charging indicator light will be orange during charging and turn green when fully charged.
3.3 Power On/Off
- Power On: Press any of the A, B, X, Y, Home, or Mode buttons.
- Power Off: Long press the Mode button. The controller will also automatically power off after 10 minutes of inactivity, unless using Continuous Fire or Auto Pilot Gaming.
3.4 Calibration
To ensure optimal performance, it is recommended to calibrate the gyroscope, joysticks, and triggers if you experience any issues.
3.4.1 Gyroscope Calibration
- Ensure the controller is powered on.
- Place the controller on a flat surface.
- Simultaneously press the
+,-,D-pad Left, andAbuttons. - The controller will vibrate once to indicate successful calibration.
Note: Gyroscope calibration is not necessary if it is functioning normally.
3.4.2 Joysticks, ZL & ZR Triggers Calibration
- Ensure the controller is powered on.
- Simultaneously press the
L,R,D-pad Left, andAbuttons for 6 seconds to enter calibration mode. - Fully move both the left and right joysticks in complete circles 2-3 times. The light ring around a joystick will turn green when its calibration is complete.
- The controller will automatically exit calibration mode once both joysticks' light rings turn green.
4. Operating Instructions
4.1 Pairing Methods
4.1.1 Pairing with PC
The GuliKit KK3 Pro offers multiple ways to connect to your PC:
Bluetooth Pairing (125Hz Polling Rate)
Requires a computer with Bluetooth capability.
- Switch the controller to PC mode.
- Long press the SYNC button for 2 seconds. The indicator light will start scrolling, indicating pairing mode.
- On your computer, go to Bluetooth settings, add a new device, and search for "GuliKit Controller".
- Once "Connected" is displayed, pairing is complete.
Wired Connection (1000Hz Polling Rate)
- Set the controller to PC mode.
- Connect one end of the provided USB-C data cable to the controller.
- Insert the other end into a USB-A port on your computer. For desktop PCs, using a rear USB port is recommended for stability.
Using PC Exclusive KK3 "Hyperlink" Adapter (1000Hz Polling Rate)

- Set the controller to PC mode. Hold the SYNC button until the indicator light starts scrolling.
- Insert the Hyperlink adapter into a USB port on your computer.
- Press the pairing button on the side of the adapter once. The adapter's light will flash quickly to enter pairing mode.
- Both the controller and adapter indicator lights will remain solid, indicating successful pairing.
4.1.2 Pairing with Nintendo Switch
Method 1 (Wireless)
- On your Nintendo Switch, navigate to the controller settings page.
- Switch the controller to Switch mode. Long press the SYNC button for 2 seconds until the indicator light starts scrolling.
- The Switch interface will display connection to the new controller, indicating pairing is complete.
Method 2 (Wired, then Wireless)
- Set the controller to Switch mode.
- Connect one end of the USB-C data cable to the controller and the other end to a USB-A port on the Switch dock.
- Place your Switch console on the dock. The controller will automatically pair with the console.
- Once paired, you can unplug the data cable for wireless use or keep it plugged in for wired mode.
4.1.3 Pairing with Android, iOS, and macOS devices
- Double-click the Mode button on the controller to switch to Android/iOS mode.
- Hold the SYNC button for 2 seconds. The indicator light will start scrolling.
- On your device, go to Bluetooth settings, enable Bluetooth, and search for available devices.
- Select "Xbox Wireless Controller" from the list.
- Once "Connected" is displayed, pairing is complete.
4.2 Special Function Settings
All special function settings require holding down the Setting button (Gear icon) while pressing the corresponding buttons. Settings are automatically saved. The logo light will be blue when special settings are configured, and white otherwise.
4.2.1 Back Button Configuration (G1, G2, G3, G4)

- Mapping: Hold the Setting button + the desired back button (G1-G4). You will feel a short vibration. Then, press the button you wish to assign. A long vibration confirms the mapping.
- Cancellation: Hold the Setting button + the back button you want to unmap. A long vibration confirms cancellation.
Note: Back buttons only support normal key functions and do not support Continuous Fire.
4.2.2 Joystick Dead Zone Mode
- Enable Dead Zone: Press Setting button +
+. One vibration. - Disable Dead Zone (Default): Press Setting button +
+again. Long vibration.
4.2.3 Adjust Joystick Sensitivity (R3, L3)

Each joystick can be configured individually by pressing down on the joystick (R3 for right, L3 for left).
- 50% Sensitivity: Press Setting button + R3/L3. One vibration, joystick ring turns red.
- 100% Sensitivity (Default): Press Setting button + R3/L3. Two vibrations, joystick ring turns blue.
- 150% Sensitivity: Press Setting button + R3/L3. Three vibrations, joystick ring turns green.
4.2.4 Star Ring Lighting Effects

Press Setting button + - to cycle through lighting effects:
- Default Steady On
- Joystick-activated Flowing Light
- Vibration-activated Light
- Trigger-activated Flowing Light
- Off
4.2.5 D-pad Mode (4-direction/8-direction)

- 4-direction Mode: Press Setting button +
D-pad Up. One vibration. - 8-direction Mode (Default): Press Setting button +
D-pad Upagain. Long vibration.
4.2.6 Continuous Fire (Turbo)
Press Setting button + A/B/X/Y/R/L/ZR/ZL to configure Continuous Fire for the selected button.
- Normal Continuous Fire: One vibration. Active when button is held, stops when released.
- Auto Continuous Fire: Two vibrations. Press once to start, press again to stop.
- Cancel Continuous Fire (Default): Long vibration.
4.2.7 A-B X-Y Swap
- Swap A-B and X-Y: Press Setting button +
Home. One vibration. - Restore Default: Press Setting button +
Homeagain. Long vibration.
4.2.8 Adjust Vibration Intensity
Press Setting button + D-pad Down to adjust vibration intensity.
- Weak Vibration: One vibration.
- Standard Vibration (Default): Two vibrations.
- Strong Vibration: Three vibrations.
- Turn Off Vibration: Long vibration.
4.2.9 Adjust Vibration Mode

Press Setting button + D-pad Right to adjust vibration mode.
- Rotary Motor Mode: One vibration.
- GuliKit Maglev Haptic Mode (Default): Two vibrations.
- HD Vibration Mode: Three vibrations.
4.2.10 Auto Pilot Gaming (APG) Function

The APG function allows recording and repeating custom commands or macros using the APG button (Double-Square icon button).
- Recording: Hold the APG button for 3 seconds. A short vibration indicates recording has started. All button presses and joystick movements will be recorded for up to 10 seconds. Press the APG button again or wait 10 seconds to stop. A long vibration confirms recording is complete.
- Replay Once: Briefly press the APG button once.
- Continuous Replay: Double-click the APG button. Replay continues until interrupted.
- Cancel Replay: Press any button except the joysticks during replay.
4.2.11 APG Recording File Share
This feature allows you to manage your APG recording files.
- Press Setting button +
APG buttonto enter APG read/write mode. - Connect the USB data cable to your computer. A USB drive named "GuliKit dat" will appear.
- Open the drive to find "Auto.apg", your APG recording file. You can copy it for backup or sharing.
- To overwrite, copy a new APG file into the USB drive.
Note: Do not change the file name. The controller will power off automatically after writing is complete.
4.2.12 Clear All Settings (Reset)
To restore the controller to its factory settings, press Setting button + D-pad Left. A long vibration indicates the reset is complete.
5. Maintenance
5.1 Cleaning and Storage
- Wipe the controller with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Keep out of reach of small children due to small parts that may cause suffocation.
5.2 Battery Information

The GuliKit KK3 Pro Gamepad is equipped with a 950mAh Li-Polymer battery.
- With joystick lights off and Turbo on, the battery can last for approximately 28 hours.
- With low joystick lights and Turbo on, the battery can last for approximately 15 hours.
- When the battery is low, the logo light will flash, and the vibration function will automatically turn off. Vibration will resume when the battery level is restored.
- Battery life may be reduced in games with intense and frequent vibration features.
6. Troubleshooting
- Controller not powering on: Ensure the battery is charged. Connect the USB-C cable to a power source.
- Pairing issues: Double-check that the controller is in the correct mode for your device (PC, Switch, Android/iOS). Ensure the SYNC button is pressed for 2 seconds until the indicator light scrolls. For PC with Hyperlink adapter, ensure both controller and adapter are in pairing mode.
- Input lag or disconnection: For wired PC connection, try a different USB port, preferably a rear port on a desktop. For wireless, ensure no strong interference sources are nearby.
- Joystick or trigger inaccuracy: Perform the joystick and trigger calibration as described in section 3.4.2.
- Vibration not working: Check the vibration intensity settings (section 4.2.8) to ensure it's not turned off. Also, ensure the battery is not low.
- APG function not working: Ensure you are following the recording and replay steps correctly (section 4.2.10). The maximum recording time is 10 seconds.
For more questions and answers, please visit the official GuliKit website and navigate to the "Support" section for the "Frequently Asked Questions" (FAQ) related to the controller: www.gulikit.com
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | GuliKit |
| Model Number | Kingkong 3 Pro NS38 |
| Type | Gamepads |
| Interface Type | USB, Bluetooth, 2.4G |
| Compatible Platform | PC, Android, iOS, Nintendo Switch, Nintendo Switch OLED, Nintendo Switch Lite |
| Joystick Sensor Module | GuliKit Hall Effect |
| Trigger Button Type | Hall-Linear |
| D-pad Switch Type | Membrane |
| ABXY Switch Type | Membrane |
| Bumpers Switch Type | Membrane |
| Battery Included | Yes (950mAh Li-Polymer) |
| Wear-resistant joysticks | Yes |
| RGB lighting joysticks | Yes |
| Hall Effect | Yes |
| Certification | CE, RoHS |
| Origin | Mainland China |
| Package Weight | 0.6 kg |
| Package Dimensions | 10cm x 10cm x 10cm |
8. User Tips
- Experiment with the three joystick sensitivity modes (50%, 100%, 150%) to find the perfect setting for different game genres, from precise aiming in FPS to broad movements in adventure games.
- Utilize the Auto Pilot Gaming (APG) function for repetitive tasks, complex combos, or even AFK farming in certain games. Remember you can still control movement with the joystick during replay.
- Take advantage of the detachable and remappable metal rear paddles to keep your thumbs on the joysticks, improving reaction time and comfort.
- For competitive PC gaming, always use the wired connection or the GuliKit Hyperlink Adapter to achieve the full 1000Hz polling rate for the fastest response times.
- Customize the Star-Ring RGB lights to match your setup or to provide visual cues for different controller states.
- Adjust the D-pad mode between 4-direction and 8-direction based on the game. The 4-direction mode can help prevent accidental inputs in fighting games or platformers.
9. Warranty and Support
For detailed warranty information, product support, and frequently asked questions, please visit the official GuliKit website:
You can also refer to the comprehensive user manual in PDF format for additional details and diagrams: GuliKit KK3 PRO User Manual (PDF)