1. Product Overview
The HYULIGHTS BEAM 300 Mini Moving Head Light is a powerful and versatile lighting fixture designed for professional stage and DJ applications. It features a 290W lamp, a dynamic 360° RGB halo effect, multiple gobos, prisms, and a wide zoom beam angle to create stunning visual displays.

Figure 1: HYULIGHTS BEAM 300 Mini Moving Head Lights
2. Key Features
- 300W Power: High-intensity light output for vibrant beams.
- 360° Dynamic RGB Effect: Features 24pcs RGB 3in1 5050 LEDs for vivid halo lighting, dynamic aperture, and RGB mixing.
- 152MM Lens: Precision optics for clear and sharp projections.
- Advanced Cooling & Durable Build: High-efficiency cooling system, flame-retardant and high-temperature resistant plastic shell, and a durable metal frame ensure stable, long-lasting operation.
- Intelligent DMX512/RDM Control & LCD: Seamless integration with DMX/RDM protocols and easy adjustment via an intuitive LED display.

Figure 2: Key Features Overview

Figure 3: 360° Dynamic RGB Effect

Figure 4: Advanced Cooling & Durable Build

Figure 5: Intelligent DMX512/RDM Control & LCD
3. Setup
3.1 Unpacking and Inspection
Carefully unpack the device and inspect it for any damage during transit. In the carton box, you should find the following items:
- 1 x HYULIGHTS BEAM 300 Mini Moving Head Light
- 1 x Power Cable
- 1 x DMX Cable
- 2 x Omega Brackets
- 1 x User Manual (this document)
3.2 Power Connection
Connect the power cable to the 'POWER IN' port on the rear of the unit and then to a compatible AC power outlet (AC100-240V, 50/60Hz). Ensure the power switch is in the 'OFF' position before connecting.
3.3 DMX Connection
For DMX control, connect a DMX cable from your DMX controller's output to the 'DMX IN' port of the first fixture. For multiple fixtures, daisy-chain them by connecting the 'DMX OUT' of the first fixture to the 'DMX IN' of the next, and so on.
3.4 Installation
The fixture is designed for self-contained installation. Use the provided omega brackets to securely mount the light to a truss or other suitable structure. Ensure all connections are firm and secure before operation.
4. Operating Instructions
4.1 Control Panel and Display
The fixture features an LED display and intuitive menu navigation buttons for easy setup and control. Use the 'Menu', 'Up', 'Down', and 'OK' buttons to navigate through the settings.
4.2 Operating Modes
The HYULIGHTS BEAM 300 supports several operating modes:
- Auto Mode: Pre-programmed light shows run automatically.
- Sound Mode: Lights react to ambient sound via a built-in microphone.
- Master&Slave Mode: Link multiple fixtures where one acts as the master and others synchronize.
- DMX512/RDM Mode: Full control over all features using a DMX controller. The fixture uses 16 DMX channels.
4.3 Effects and Features
- Pan/Tilt: Pan scan of 540° (16bit) and Tilt scan of 270° (16bit) with electric correction for precise movement.
- Halo Effect: The 24pcs RGB 3in1 5050 LEDs create a dynamic 360° RGB halo effect around the main lens.
- Color Wheel: Features 13 colors with infinite rotating speed for a wide range of color options.
- Gobo Wheel: Includes 14 gobos with shake and infinite rotating speed to project various patterns.
- Prism: Equipped with 1 piece of 48 rotating prisms for multi-beam effects.
- Other Effects: Includes Frost and a 6-in-1 rainbow effect for additional visual versatility.
- Zoom Beam Angle: Adjustable from 1.5° to 15° for narrow, sharp beams or wider washes.
- Strobe: Adjustable strobe speed up to 25 times/second.
- Dimmer: 0-100% mechanical step dimmer for smooth intensity control.
Video 1: Product Demonstration and Technical Parameters

Figure 6: Gobo Patterns

Figure 7: Beam Colors and Patterns
5. Maintenance
5.1 Cleaning
Regularly clean the lens and exterior of the fixture with a soft, dry cloth to ensure optimal light output and performance. Avoid using abrasive cleaners or solvents.
5.2 Environmental Protection
The fixture has a protective class of IP20, meaning it is protected against solid objects over 12.5mm but has no protection against liquids. Ensure it is used in dry environments and protected from moisture.
6. Troubleshooting
If you encounter any issues with your HYULIGHTS BEAM 300, please consider the following general troubleshooting steps:
- No Power: Check the power cable connection and ensure the power switch is in the 'ON' position. Verify the power source is active.
- No Light Output: Ensure the dimmer is not set to 0% and the lamp is functioning correctly.
- No DMX Control: Check all DMX cable connections. Ensure the DMX address is correctly set on the fixture and matches your controller's settings. Verify the DMX controller is sending signals.
- Erratic Movement/Effects: This could indicate a DMX signal issue or a need to reset the fixture. Try cycling the power or checking DMX connections.
For persistent issues, please refer to the Warranty/Support section for contact information.
7. Specifications
| Parameter | Value |
|---|---|
| Voltage | AC100-240V, 50/60Hz |
| Power Dissipation | 450W |
| Lamp | 290W (Color temperature: 9300K) |
| Halo Effect | 24pcs RGB 3in1 5050 LEDs |
| Channel Mode | 16 DMX512 Channel |
| Pan Scan | 540° (16bit) Electric correction |
| Tilt Scan | 270° (16bit) Electric correction |
| Strobe | 25 times/sec |
| Prism | 1pcs 48 rotating prisms |
| Other Effect | Frost and 6in1 rainbow effect |
| Zoom Beam Angle | 1.5°-15° |
| Color Wheel | 13 colors + infinite rotating speed |
| Gobo Wheel | 14 gobos + shake + infinite rotating speed |
| Dimmer | 0-100% mechanical step |
| Features | Auto mode, Sound mode, Master&Slave, RDM |
| Housing | High temperature resistant plastic shell |
| Protective Class | IP 20 |
| Display Board | LED display |
| Net Weight (N.W) | 9KG |
| Gross Weight (G.W) | 11KG |
| Packing Size | 50 x 36 x 36.5 cm |
| Luminous Flux | >82000 |
| Installation Method | Self-contained |
| Certification | FCC, RoHS, UL, WEEE, CE |
| Occasion | Professional Stage & DJ |
| Item Type | Stage Lighting Effect |
8. Warranty and Support
8.1 Warranty
This product comes with a 2-year warranty. If any quality problems occur within 2 years from the date of purchase, new items will be sent for free or a full refund will be provided.
8.2 Customer Support
We offer quick response within 12 hours for any inquiries or issues. Please do not hesitate to contact us at any time. Providing a video or pictures can help expedite the support process.

Figure 8: Customer Service Details
9. User Tips
- DMX Programming: For advanced control and custom light shows, familiarize yourself with DMX programming. If you need specific batch files or programming assistance, contact customer support.
- Contact Support First: If you encounter any problems or are not completely satisfied, it is always best to contact customer support directly. They are committed to ensuring your satisfaction and can provide prompt assistance.