1. Introduction
The TDT-6022 Smart Battery Management System (BMS) is specifically designed for 8-16 series 50A-200A energy storage battery packs. It is compatible with various lithium battery chemistries, including lithium-ion and lithium iron phosphate (LiFePO4). This BMS offers advanced features for intelligent battery management in applications such as home energy storage, communication base stations, building energy storage, and industrial equipment backup.
Key features include comprehensive charging and discharging protection, automatic SOC (State of Charge) and SOH (State of Health) learning, historical data storage for traceability, and multiple communication interfaces (RS485, RS232, Bluetooth, CAN) for real-time data monitoring and online upgrades. It supports parallel connection of up to 15 battery packs and is compatible with mainstream inverters like PYLONTECH, GOODWE, Growatt, and Victron Energy.
2. Setup
2.1. General Safety Warnings
- This product is not suitable for children under 3 years of age. To be used under the direct supervision of an adult. Due to small parts, keep away from children under three.
- Ensure that the installation of powered products is carried out during a power outage. Before connecting, double-check that the power is off.
- Please ensure you have a certain level of manual dexterity before purchasing and installing this product.
2.2. Components Overview
The TDT Smart BMS system typically includes the following components:
- Mainboard: The central processing unit for battery management.
- Communication Board: Provides various communication interfaces.
- LCD Screen (Optional): For local display and configuration.
- Color Touch Screen (Optional): For advanced local display and configuration.
- Bluetooth Module (Optional): For wireless communication with mobile apps.
- Active Balancer (Optional): Enhances cell balancing performance.
- Cables & NTCs: For cell voltage sensing and temperature monitoring.
2.3. Connection Instructions
Carefully follow the wiring diagram below for proper installation. Incorrect wiring can damage the BMS and battery pack.
- Connect the main negative (B-) and main positive (B+) terminals of the battery pack to the corresponding terminals on the BMS.
- Connect the cell balancing wires (1-16) to the battery cells in the correct order, ensuring each wire corresponds to its respective cell voltage tap.
- Connect the NTC (Negative Temperature Coefficient) sensors to the battery pack for temperature monitoring.
- Connect the Motor and Charger to their designated ports on the BMS, if applicable to your system configuration.
2.4. Initial Capacity Learning
For newly installed batteries, it is crucial to perform a capacity learning operation to ensure accurate SOC and SOH readings. This process helps the BMS understand the battery's actual capacity and cycle characteristics.
Capacity Learning Procedure:
- Perform a full charge until the battery reaches its overvoltage protection limit.
- Discharge the battery completely until it reaches its undervoltage protection limit.
- Perform another full charge.
Failure to perform this operation may result in capacity errors.
3. Operating the TDT Smart BMS
3.1. Communication Modes
The TDT Smart BMS supports multiple communication protocols for flexible integration and monitoring:
- CAN: Controller Area Network for robust industrial communication.
- RS485: Serial communication for long-distance and multi-drop applications.
- RS232: Standard serial communication.
- Bluetooth (BT): Wireless communication for mobile app connectivity.
3.2. Mobile App Monitoring (Bluetooth)
The