1. Introduction
The Mestek EMF02R is a high-precision digital electromagnetic radiation meter designed for detecting various types of electromagnetic radiation, including electric fields (E-field), magnetic fields (H-field), and high-frequency radio frequency (RF) signals. This device is equipped with a high-sensitivity three-axis induction probe (X, Y, Z-axis) for comprehensive signal detection. It features a VA reverse display color screen for clear readings, temperature and humidity measurement, and an alarm function to indicate excessive radiation levels. It is suitable for use in various environments such as homes, offices, industrial settings, and near signal base stations.
2. Safety Information
- Read all instructions carefully before using the device.
- Do not attempt to disassemble or modify the device.
- Keep the device away from water and extreme temperatures.
- Use only the provided USB Type-C cable for charging.
- If the device displays an alarm indicating excessive radiation, take protective measures or move away from the radiation source.
3. Product Overview
3.1 Components and Accessories
- High frequency radiation detector (Mestek EMF02R)
- USB Type-C charging cable
- Product manual
- Cloth bag
- Packaging box
3.2 Key Features
- Maximum/Average value measurement (AVG/MAX)
- Data hold function (HOLD)
- Multiple measurement units (uT, mG, V/m, uW/cm²)
- Electric field (E-field) and Magnetic field (H-field) detection
- Radio frequency (RF) detection
- Temperature and humidity measurement
- Buzzer switch for audible alarms
- Low battery warning
- Automatic shutdown (approx. 15 minutes)
- Built-in 18650/2000mA/3.7v lithium battery
- VA color screen display
- Working height up to 2000m
3.3 Display Screen
The VA reverse display color screen shows various information and measurement results. Refer to the table below for symbol descriptions:
| Symbol | Description | Unit | Description |
|---|---|---|---|
| Battery icon | Battery Indicator | uT | Micro Teslas |
| Power icon | Automatic shutdown | V/m | Volts per meter |
| Bar graph | Simulated display | uW/cm² | Microwatt/square centimeter |
| AVG | Average value | °C | Celsius |
| MAX | Maximum value | °F | Fahrenheit degree |
| HOLD | Data locking | % | Humidity |
| RF | Radio frequency | Speaker icon | Ringtone |
| H-field | Magnetic field | ||
| E-field | Electric field |
3.4 Key Introduction
| Symbol | Description |
|---|---|
| Power button | Power on/off |
| SEL | Function conversion key (switch between E-field, H-field, RF) |
| AVG/MAX | Average and maximum value conversion keys |
| HOLD | Data lock key (freezes current reading) |
| Buzzer icon | Ring tone on/off key |
| RF | High frequency signal conversion key (directly switch to RF mode) |
4. Setup
4.1 Charging the Device
- Connect the provided USB Type-C charging cable to the charging interface on the device.
- Connect the other end of the USB cable to a 5V/1A USB power source (e.g., computer USB port, USB wall adapter).
- The battery indicator on the screen will show charging status. A full charge takes approximately 4 hours.
- Ensure the device is fully charged before first use for optimal performance.
4.2 Power On/Off
- To power on: Press and hold the Power button (
) until the screen lights up. - To power off: Press and hold the Power button until the screen turns off.
- The device features an automatic shutdown function after approximately 15 minutes of inactivity to conserve battery.
5. Operating Instructions
5.1 Measurement Modes
The EMF02R supports three main measurement modes: RF (Radio Frequency), E-field (Electric Field), and H-field (Magnetic Field).
- Switching Modes: Short press the SEL key to cycle through E-field, H-field, and RF measurement modes. The current mode will be displayed on the screen.
- RF Mode: For high-frequency signal radiation measurement. Short press the RF button to directly enter this mode. Can measure base stations between 30MHz and 8GHz.
- E-field Mode: For electric field radiation measurement. The screen displays "E-field". Measures the electric field radiation value of electrical equipment.
- H-field Mode: For magnetic field radiation measurement. The screen displays "H-field". Press the SEL button again in H-field mode to convert between mG (milliGauss) and uT (micro Tesla) units. Measures the electromagnetic radiation values of electrical equipment.
5.2 AVG/MAX and HOLD Functions
- AVG/MAX: Press the AVG/MAX button to switch between average and maximum value display for the current measurement.
- HOLD: Press the HOLD button to freeze the current reading on the screen. Press it again to release the hold and resume real-time measurement.
5.3 Understanding Radiation Levels and Alarms
The device provides a simulated display bar (bar graph) and an audible alarm to indicate radiation levels. When the bar reaches the yellow or red area, the instrument will alarm, indicating excessive radiation. Protective measures should be taken, or you should move away from the radiation source.
| Analog Display | Green (Safe) | Yellow (Caution) | Red (Danger) |
|---|---|---|---|
| uW/cm² | 0.0 - 39.9 | 40 - 99.9 | 100 - 9999 |
| V/m | 0 - 39 | 40 - 399 | 400 - 999 |
| mG | 0.0 - 3.9 | 4.0 - 39.9 | 40.0 - 199.9 |
| uT | 0.00 - 0.39 | 0.40 - 3.99 | 4.00 - 19.99 |
Radiation sources are everywhere, including common household items. The EMF02R can help identify these sources.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged (around 50%) and recharge it every few months to maintain battery health.
- Battery: The device uses a built-in 18650/2000mA/3.7v lithium battery. Do not attempt to replace the battery yourself. Contact support if battery issues arise.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low battery or no charge. | Charge the device using the USB Type-C cable for at least 4 hours. |
| Inaccurate readings. | Interference from other electronic devices; device not held correctly. | Move away from other strong electromagnetic sources. Ensure the device is held steadily. |
| Screen is blank or frozen. | Software glitch or low battery. | Try restarting the device. If it doesn't respond, charge it. |
| Alarm sounds frequently. | High radiation levels detected. | This indicates the device is working correctly. Identify the source and take protective measures or move away. |
8. Specifications
| Parameter | Value |
|---|---|
| Working height | 2000m |
| Measurement method | Electromagnetic induction, RF radio frequency receiving sensor |
| Display screen | VA reverse display color screen |
| Maximum Display | 9999 |
| Sampling rate | About 0.4 seconds |
| Measuring range | V/m: 0~999; uT: 0.00~19.99; mG: 0.0~199.9; uW/cm²: 0.0~9999 |
| Test bandwidth | 30MHz~8GHz |
| Resolving power | V/m: 1; uT: 0.01; mG: 0.1; uW/cm²: 0.1; °C: 0.1; °F: 0.2; %RH: 1 |
| Alarm method | Sound, simulation bar |
| Automatic shutdown | About 15 minutes |
| Working current | Approximately 50mA |
| Charging interface | USB Type-C |
| USB charging | 5V/1A |
| Source | 18650/2000mA/3.7v lithium battery |
| Charging time | About 4 hours |
| Temperature measurement range | 0-50℃ |
| Humidity measurement range | 0-90% RH |
| Working temperature and humidity | 0-50℃/0-90% RH |
| Storage temperature and humidity | -10-60℃/0-80% RH |
| Size | 204 x 63 x 32mm |
| Weight | Approximately 220g |
9. User Tips
- For best results, perform measurements in a quiet environment away from other strong electronic devices that might cause interference.
- When measuring, try to maintain a consistent distance from the object being tested.
- Remember that radiation levels can fluctuate. Use the AVG/MAX function to get a better understanding of the typical and peak radiation in an area.
- The device is designed for general detection and awareness. For professional or certified measurements, consult specialized equipment and experts.
10. Warranty and Support
The Mestek EMF02R Digital Electromagnetic Radiation Meter comes with a 1-year warranty from the date of purchase.
For technical support, warranty claims, or any inquiries, please contact us:
- Telephone: +86 18674321147 (Max)
- WhatsApp: +86 17353454425
- Email: snowx333377@gmail.com