1. Introduction
The Lemorele Q50 is a wireless HDMI video transmission system designed to extend or mirror your display from a source device to a larger screen without the need for cables. It consists of a Transmitter (TX) and a Receiver (RX) unit, offering a plug-and-play solution for various applications, including presentations, gaming, and home entertainment. This manual provides detailed instructions for setting up, operating, and maintaining your Q50 system.

Image: The Lemorele Q50 Wireless HDMI Transmitter and Receiver Kit, illustrating its capability for both extended and mirror display modes.
2. Setup Instructions
The Lemorele Q50 system is designed for easy, driver-free installation. Follow these steps to connect your devices:
- Connect the Receiver (RX) Unit:
Plug the RX unit into an available HDMI input port on your display device (TV, monitor, or projector). Ensure the display device is powered on and set to the correct HDMI input source. - Connect the Transmitter (TX) Unit:
Insert the TX unit into the HDMI output port of your source device (PC, laptop, game console like PS5, or DV camera). For stable operation, connect the TX unit to a 5V/2A power source using a USB-C cable (not always required for all devices, but recommended for optimal performance).

Image: Visual guide for connecting the RX unit to a TV and the TX unit to a computer with power.

Image: Diagram illustrating compatible source devices (PC, Notebook, DV, PS5) and display devices (TV, Monitor, Projector) with the Q50 system.
3. Operating Instructions
Once connected, the Q50 system will automatically establish a wireless connection. You can choose between two primary display modes:
Display Modes
- Projection (Mirror) Mode: Displays the exact same content from your source device onto the larger screen. Ideal for presentations, sharing videos, or gaming for a larger viewing experience.
- Extended Mode: Extends your desktop, allowing you to have different content on your source device and the larger screen. This is useful for multitasking, combining office work with entertainment, or having reference material on one screen while working on another.

Image: Comparison of Projection (Mirror) mode for same screen display and Extended mode for split screen operation.
One-Click Disconnect/Reconnect
The TX unit features a button for quick disconnection and reconnection. During screen casting, a single press of this button will disconnect the transmission, providing privacy or allowing you to pause sharing. Pressing it again will re-establish the connection instantly.

Image: A hand pressing the one-click button on the TX unit, highlighting the privacy and control feature.
4. Specifications
Product Parameters
| Parameter | Detail |
|---|---|
| Product Name | HD wireless transmission system |
| Product Model | Q50 |
| Transmitter Interface | Type-C/HDMI |
| Receiver Interface | Type-C/HDMI |
| Key Function | Reset button + Pairing |
| Power Supply | 5V/2A |
| Resolving Power | 1080P/60Hz |
| Shell Material | ABS |
| Color Options | Black [Vertical], White [Vertical] |
| Size (L*W*H) | 70mm * 26mm * 11.5mm |
Note: All data are manually measured and are for reference only. Actual product details may vary due to individual differences or product batches.

Image: Detailed table of product parameters for the Q50 Wireless HDMI system.
Key Features
- Wireless HD transmission with 1080P/60Hz resolution.
- Point-to-point dual mode for stable, long-distance transmission (up to 50 meters).
- No wiring, no network, and no driver installation required (plug and play).
- 5G high-speed transmission for low latency and stable display.
- Supports both screen mirroring (projection mode) and screen extension (split screen mode).
- High compatibility with various devices including PCs, notebooks, DVs, and PS5.

Image: Graphic summarizing key features such as no wiring, no network, 5G transmission, and multiple display modes.
5. Troubleshooting
- No Signal / Black Screen:
- Ensure both TX and RX units are securely connected to their respective ports.
- Verify that the display device is powered on and set to the correct HDMI input source.
- Check if the TX unit is receiving adequate power (5V/2A recommended, especially for Type-C connections).
- Try restarting both the source device and the display device.
- Unstable Connection / Flickering Screen:
- Ensure the TX and RX units are within the recommended 50-meter transmission range.
- Minimize obstacles (walls, furniture) and sources of wireless interference (Wi-Fi routers, microwaves) between the units.
- Ensure the TX unit has a stable power supply.
- Try reconnecting both units.
- No Audio:
- Check the audio settings on your source device and ensure the output is directed through HDMI.
- Verify the audio settings on your display device.
- Ensure the TX and RX units are properly connected.
6. User Tips
- Optimal Power Supply: For consistent and stable performance, especially with the TX unit, ensure it is connected to a reliable 5V/2A power source via its USB-C port.
- Point-to-Point Connection: The Lemorele Q50 system is designed for a single Transmitter (TX) to a single Receiver (RX) connection. Attempting to connect multiple receivers to one transmitter is not supported and may result in performance issues or no signal.
- Clear Line of Sight: While the system supports up to 50m transmission, maintaining a relatively clear line of sight between the TX and RX units will ensure the most stable and high-quality signal.
7. Warranty and Support
The Lemorele Q50 Wireless HDMI Video Transmitter and Receiver Kit comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For technical assistance, troubleshooting, or warranty claims, please contact Lemorele customer support through their official channels. Please have your product model and purchase details ready when contacting support.