wishiot GX3255BLS

Contents

GX3255BLS Digital Servo Instruction Manual

Model: GX3255BLS

Brand: wishiot

1. Introduction

The wishiot GX3255BLS is a high-performance digital servo engineered for demanding remote-controlled applications. With its robust construction, powerful brushless motor, and full metal helical gears, it provides exceptional torque and precision control. This servo is ideal for 1/8 and 1/10 scale RC cars, including models like TRX6 and scx10 RC crawlers, and various robotic projects. Its IP68 waterproof rating ensures reliable operation in challenging environments.

2. Package Contents

Please verify that all items listed below are included in your package:

  • 1 x GX3255BLS Digital Servo
  • 1 x 25T Metal Servo Arm
  • Mounting Hardware (screws, rubber grommets, brass inserts)
  • Color Box Packaging
GX3255BLS Digital Servo and Accessories
Figure 2.1: The GX3255BLS Digital Servo with included accessories, featuring the main servo unit, a 25T metal servo arm, mounting hardware, and rubber grommets.

3. Specifications

Detailed technical specifications for the GX3255BLS Digital Servo:

ParameterValue
Product Size40.5 x 21 x 41.7 mm
Net Weight90g
Operating Voltage5.0-7.4V DC
Standby Current≤ 20mA
Stall Current (5.0V)≤ 6A
Stall Current (6V)≤ 7A
Stall Current (7.4V)≤ 8A
No Load Speed (5.0V)≤ 0.1 sec/60°
No Load Speed (6V)≤ 0.09 sec/60°
No Load Speed (7.4V)≤ 0.08 sec/60°
Max. Torque (5.0V)≥ 45 kgf.cm
Max. Torque (6V)≥ 50 kgf.cm
Max. Torque (7.4V)≥ 55 kgf.cm
Rotating DirectionCCW (500~2500us)
Operating Travel Angle270±10° (500~2500us)
Neutral Position1500us
Reduction Ratio1:299
Dead Band Width≤ 2us
Operating Temperature Range-20℃ ~ +80℃
Waterproof RatingIP68
Dimensional Drawing of GX3255BLS Servo
Figure 3.1: Dimensional drawing of the GX3255BLS servo (Unit: mm). Dimensions are: Length 48.00mm (mounting points 55.10mm), Width 21.00mm, Height 41.70mm (total height including shaft 45.15mm). Mounting hole diameter is 4.50mm x 4. Output shaft diameter is 5.94mm with Z25 spline.

4. Features

The GX3255BLS servo boasts several advanced features for superior performance:

  • Full Metal Helical Gear: Ensures high strength, durability, and smooth operation.
  • High Efficiency Brushless Motor: Provides powerful and precise control with improved efficiency and lifespan.
  • Semi-metal Case with CNC Integrated Metal Process: Offers excellent heat dissipation and structural rigidity.
  • IP68 Waterproof Rating: Fully sealed against dust and water immersion, allowing operation in wet conditions.
  • High Precision Magnetic Position Sensor: Delivers accurate and consistent feedback for precise control.
  • 4 All Metal Bearings: Enhances durability and reduces friction for smoother movement.
  • Ideal for 1/10 & 1/8 RC Crawlers: Specifically designed to meet the demands of heavy-duty RC applications.
Key Features of GX3255BLS Servo
Figure 4.1: Key features of the GX3255BLS servo: Fully Waterproof IP68, High Efficiency Brushless Motor, Full strength steel helical gear, Ideal for 1/10 1/8 TRX6 scx10 RC Crawler, High Precision Magnetic Position Sensor, and 4 all metal bearings.
Servo Construction with CNC Metal Process
Figure 4.2: Detailed view of the servo's construction, highlighting the CNC integrated metal process for the heatsink and the durable plastic housing.
GX3255BLS Servo Waterproof Demonstration
Figure 4.3: The GX3255BLS servo demonstrating its IP68 waterproof capability, shown partially submerged in water.

5. Setup and Installation

Follow these steps to properly install your GX3255BLS Digital Servo:

  1. Mounting the Servo: Secure the servo in your RC vehicle or robotic chassis using the provided mounting hardware (screws, rubber grommets, and brass inserts). Ensure it is firmly attached to prevent movement during operation.
  2. Attaching the Servo Arm: Select the appropriate 25T metal servo arm for your application. Align the arm with the servo's output shaft (Z25 spline) at the desired neutral position (typically centered) and secure it with the small screw provided.
  3. Connecting to Receiver/Controller: Connect the servo's three-wire cable to the appropriate channel on your RC receiver or microcontroller. The standard wiring is typically:
    • Brown/Black: Ground (GND)
    • Red: Power (VCC, 5.0-7.4V DC)
    • Orange/Yellow/White: Signal (PWM)
    Ensure the power supply to the servo is within the specified operating voltage range of 5.0-7.4V DC.
  4. Initial Calibration: Before full operation, power on your receiver/controller and ensure the servo moves freely and responds correctly to input signals. Adjust endpoints and neutral positions as necessary through your transmitter or control software.
Full Metal Gear and 25T Metal Servo Arm
Figure 5.1: Close-up of the servo's output shaft, showing the full metal gear assembly and the included 25T metal servo arm for robust connections.

6. Operating Instructions

The GX3255BLS is a digital servo controlled by Pulse Width Modulation (PWM) signals. Understanding these parameters is key to its operation:

  • Pulse Width Range: The servo responds to pulse widths typically ranging from 500us to 2500us.
  • Neutral Position: A pulse width of 1500us corresponds to the servo's neutral (center) position.
  • Operating Travel Angle: The servo has an operating travel angle of 270° ± 10° within the 500us to 2500us pulse width range.
  • Rotating Direction: The servo rotates counter-clockwise (CCW) when the pulse width increases from 500us to 2500us.
  • Dead Band Width: With a dead band width of ≤ 2us, the servo offers precise control and minimal jitter.

Ensure your control system (e.g., RC transmitter, microcontroller) is configured to output PWM signals within these specifications for optimal performance.

7. Maintenance

To ensure the longevity and optimal performance of your GX3255BLS Digital Servo, consider the following maintenance tips:

  • Cleaning: Despite its IP68 rating, it is good practice to clean the exterior of the servo after use, especially if exposed to dirt, mud, or saltwater. Use a soft, damp cloth. Avoid harsh chemicals.
  • Gear Inspection: Periodically inspect the metal gears for any signs of wear or damage. While the full metal helical gears are highly durable, extreme impacts can cause issues.
  • Wiring Check: Regularly check the servo's wiring for any fraying, cuts, or loose connections. Secure any loose wires to prevent intermittent operation.
  • Storage: Store the servo in a dry, cool place away from direct sunlight and extreme temperatures.
  • Waterproofing: The IP68 rating provides excellent protection. However, avoid intentionally submerging the servo for extended periods or in corrosive liquids. Ensure the case remains sealed and undamaged.

8. Troubleshooting

If you encounter issues with your GX3255BLS Digital Servo, try the following troubleshooting steps:

  • Servo Not Responding:
    • Check all wiring connections to ensure they are secure and correctly plugged into the receiver/controller.
    • Verify that the power supply voltage is within the 5.0-7.4V DC operating range.
    • Test with a different servo or receiver/controller to isolate the problem.
  • Erratic Movement/Jitter:
    • Ensure the power supply is stable and sufficient, especially under load. Low voltage or current can cause erratic behavior.
    • Check for any physical obstructions preventing smooth movement of the servo arm.
    • Verify that the PWM signal is clean and within the specified range (500-2500us).
  • Overheating:
    • Ensure the servo is not continuously stalled or under excessive load.
    • Check for any binding in the mechanical linkage that might be causing the servo to work harder than necessary.
    • Verify adequate airflow around the servo if operating in an enclosed space.
  • Noise:
    • A slight hum is normal for digital servos. Excessive grinding or clicking might indicate gear damage.

9. User Tips

  • Gear Material: The servo gears are made of metal, ensuring durability and strength, which is crucial for high-torque applications.
  • Power Supply: Always use a stable power source that can deliver sufficient current, especially when the servo is under heavy load, to prevent performance issues.
  • Application: This servo is particularly well-suited for 1/8 and 1/10 scale RC crawlers due to its high torque and robust construction.

10. Warranty and Support

For detailed warranty information, troubleshooting guides, or further technical assistance, please refer to the official user manual PDF available at User manual (PDF). You may also contact wishiot customer support for product-specific inquiries.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.