PowMr HHJ-60A

Contents

PowMr MPPT 60A Solar Charge Controller HHJ-60A User Manual

Model: HHJ-60A | Brand: PowMr

1. Introduction

The PowMr MPPT 60A Solar Charge Controller HHJ-60A is an advanced Maximum Power Point Tracking (MPPT) solar charge controller designed for efficient and reliable charging of various battery types in solar power systems. It features a high-performance DSP controller, automatic system voltage recognition (12V/24V/36V/48V), and a multi-stage charging algorithm to optimize battery performance and longevity. This manual provides essential information for the safe and effective installation, operation, and maintenance of your solar charge controller.

Video: Demonstrating the features and operation of the PowMr HHJ-60A Solar Charge Controller. This video highlights its 60A charging current, 99.9% MPPT tracking efficiency, high-performance DSP controller for fast digital signal processing, wide system voltage range (12V/24V/36V/48V), segmented charging for battery life optimization, built-in protection programs, fault diagnosis system, and compatibility with lithium-ion and lead-acid batteries.

2. Features

  • 100% MPPT Charge controller for maximum power point tracking.
  • Intelligent Maximum Power Point Tracking technology for high efficiency (up to 99.9% tracking efficiency).
  • Built-in DSP controller with high performance for fast digital signal processing.
  • Automatic battery voltage detection for 12V, 24V, 36V, and 48V systems.
  • Three-stage charging (Equalize, Boost, Float) optimizes battery performance and extends battery life.
  • Multi-function LCD displays for monitoring system parameters.
  • Comprehensive protection features: Reverse polarity protection of solar panel, Overcharge protection, Load short circuit protection, Battery over discharge protection, PV short circuit protection, PV over current alarm protection, Controller overheating protection, Load overload protection.
  • Easy to mount and install.
  • Suitable for various battery types: Sealed lead acid, Vented Gel, and Lithium batteries (user-defined voltage for other battery types).
  • High-airflow exhaust fan design with bearing technologies for increased life (up to 5000hrs) and efficient heat dissipation.
Comparison of PowMr MPPT Controller with other controllers.

Image: Comparison of PowMr MPPT Controller with other controllers, highlighting its 99% efficiency, fast charging, compatibility with 12V/24V/36V/48V batteries, and higher current and PV voltage limits (Max. PV 160VDC).

3-stage charging process and efficiency of the PowMr MPPT Solar Charge Controller.

Image: Explains the 3-stage charging process (Equalize Charge, Boost Charge, Float Charge) for various battery types, ensuring rapid, efficient, and safe charging. It highlights a Peak Conversion Efficiency of 98% and High Tracking Efficiency Up to 99%.

Multi-function protection features and internal components of the PowMr MPPT Solar Charge Controller.

Image: Details the multi-function protection features including Load short circuit, Battery over discharge, Battery reverse polarity, PV short circuit, PV over current alarm, Battery overcharge, Controller overheating, and Load overload protection. It also shows the dimensions (21.4cm length, 11.5cm width, 5cm height) and internal components.

3. Specifications

ParameterDescription
Model No.HHJ-60A Board Set
Charging modeMPPT Maximum power point tracking automatically, 3-stage constant current (MPPT), constant voltage (Absorption Voltage), floating charge
System typeDC12V/24V/36V/48V Recognition automatically
System voltage automatic recognition12V system (DC9V-DC15V)
24V system (DC18V-DC29V)
36V system (DC30V-DC39V)
48V system (DC40V-DC60V)
Soft start time<1S
Dynamic response and recovery time100us
Max efficiency≥98.1% (Voc is 1.5 or 2 times than battery, then it's best efficiency)
PV utilization≥99%
Voc from PV (Input specification)12V system (DC20V-DC80V)
24V system (DC37V-DC105V)
36V system (DC50V-DC160V)
48V system (DC72V-DC160V)
DC190V (Controller can't work at this voltage for long duration, will break controller. Refer to Input voltage from PV.)
Maximum PV input power12V system (720W)
24V system (1440W)
36V system (2100W)
48V system (2800W)
(Total power rated of PV can't be over this watt that will break the controller.)
Selectable battery typeVented/Sealed/Gel/NiCd/Lithium battery (defined voltage for other battery by user)
Absorption Charging VoltageRefer to Batteries charging reference
Floating Charging Voltage12V system (15V)
Overcharging protection voltage12V system (15V)
24V system (30V)
36V system (45V)
48V system (60V)
Rated output current60A
Temperature Coefficient±0.02%/centi-degree
Automatic temperature compensation14.2V-(Max temperature-25 centi-degree)*0.3
Output voltage ripple-peak100mV
Output voltage accuracy≤±1%
Input Anti-intrusion protectionYes
Temperature Protection75°C (Output power will reduce when it's more 70°C, Output power will be normal when it's less 55°C)
Fan-on temperature>40°C
Fan-off temperature<35°C
Acoustic noise≤40dB
Cooling wayForced air cooling
ComponentsImported materials, Accord to EU standards, Industrial grade range
Environmental requirementsMeet 2002/95/EC, No cadmium, hydrides and fluorides
Security LevelAccord to CE, PSE, FCC, EMC, EN60950
Electromagnetic CompatibilityAccord to EN61000, EN55022, EN55024
Detailed technical specifications table for the HHJ-60A Solar Charge Controller.

Image: Detailed technical specifications table for the HHJ-60A Solar Charge Controller.

4. Setup

4.1 Mounting the Controller

The controller should be mounted in a well-ventilated area, away from direct sunlight, high temperatures, and moisture. Ensure there is sufficient space around the controller for proper airflow, especially around the cooling fan. Use appropriate screws and mounting hardware to secure the controller to a stable surface.

Mounting diagram for the PowMr MPPT Solar Charge Controller.

Image: Illustrates the mounting process for the solar charge controller.

4.2 Wiring Connections

Follow the wiring diagram carefully. Ensure all connections are secure and correct polarity is observed to prevent damage to the controller or other components. Use appropriate wire gauges for your system's current and voltage requirements.

  1. Connect the Battery: Connect the battery to the BT+ and BT- terminals. Ensure correct polarity. The controller will automatically detect the battery voltage.
  2. Connect the Solar Panels (PV): Connect the solar panels to the PV+ and PV- terminals. Ensure correct polarity. Verify that the PV input voltage (Voc) is within the specified range for your system voltage (e.g., DC20V-DC80V for 12V system).
  3. Connect the DC Load (Optional): Connect your DC loads to the OU+ and OU- terminals.
Wiring diagram for PowMr MPPT Solar Charge Controller in a solar system.

Image: Illustrates the connection of the MPPT Solar Charge Controller within a solar power system, showing PV Solar Panels connected to the controller, the controller connected to a Battery, and the battery supplying power to a DC Load. An Inverter is also shown connected to the battery, providing AC power to AC Loads.

Top view of the PowMr MPPT Solar Charge Controller showing terminal connections.

Image: Top-down view of the controller, clearly showing the terminal blocks for PV+ (solar panel positive), PV- (solar panel negative), BT+ (battery positive), BT- (battery negative), OU+ (load positive), and OU- (load negative).

5. Operating Instructions

5.1 LCD Display and Navigation

The controller features a backlit LCD screen that displays various system parameters. Use the 'PRG/ESC' and 'ENTER' buttons, along with the up/down arrows, to navigate through the menus and adjust settings.

  • PRG/ESC: Press to enter programming mode or exit current menu.
  • Up/Down Arrows: Navigate through menu options or adjust values.
  • ENTER: Confirm selection or enter a submenu.
Backlit LCD screen interface and working modes of the PowMr MPPT Solar Charge Controller.

Image: Displays the backlit LCD screen interface, showing various parameters like Battery Charging Voltage, Current, Temperature, Working Mode, Production Mode, and Sub-Interface options.

5.2 Working Modes

The controller operates in different modes depending on the time of day and charging status:

  • 3.0 Night Mode: No charging occurs.
  • 4.0 MPPT Mode: Maximum Power Point Tracking, actively extracting the most power from solar panels.
  • 7.0 Absorption Mode: Charges the battery at a constant voltage after the bulk charging stage.
  • 8.0 Floating Mode: Maintains the battery at a full state of charge with a reduced voltage.

5.3 Battery Type Selection

The controller supports various battery types. It is crucial to select the correct battery type in the settings to ensure optimal charging and prevent damage. Refer to the specifications for default and user-defined voltage settings for Vented, Sealed, Gel, NiCd, and Lithium batteries.

6. Maintenance

  • Regular Inspection: Periodically check all wiring connections for tightness and corrosion.
  • Cleanliness: Keep the controller clean and free from dust. Ensure the cooling fan and ventilation openings are not obstructed.
  • Environmental Conditions: Ensure the controller is operating within its specified environmental requirements (temperature, humidity).
  • Firmware Updates: Check the manufacturer's website for any available firmware updates to ensure optimal performance and new features.

7. Troubleshooting

The HHJ-60A controller includes a fault diagnosis system to assist with troubleshooting. Refer to the LCD display for error codes or abnormal readings.

  • No Display/Power: Check battery connections and voltage. Ensure the battery is adequately charged.
  • No Charging: Verify solar panel connections and ensure sufficient sunlight. Check PV input voltage.
  • Overheating: Ensure proper ventilation around the controller. Check if the cooling fan is operating when the internal temperature exceeds 40°C. If the fan does not activate above 40°C, it may indicate a fault.
  • Protection Activations: The controller has built-in protections for various conditions (e.g., PV over current, battery overcharge/discharge, short circuits). If a protection activates, the controller may stop operating or display an error. Identify the cause of the protection activation and rectify it before resuming operation.
  • Incorrect Readings: Ensure all sensors (if external) are correctly connected and calibrated.

8. User Tips

  • Optimal PV Voltage: For best efficiency (≥98.1%), ensure the Voc (Open Circuit Voltage) of your solar panels is 1.5 to 2 times higher than your battery voltage.
  • Fan Operation: The cooling fan is designed to activate when the internal temperature exceeds 40°C and turn off below 35°C. This is normal operation to manage heat.
  • Packaging: The product is typically well-packaged for safe delivery. Keep the original packaging for potential returns or future transport.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

© 2024 PowMr. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.