1. Introduction
Thank you for purchasing the ASOMETECH H688 240W GaN Charger Station. This device is a versatile 10-in-1 charging solution designed to power multiple devices simultaneously, featuring advanced GaN technology for safe and efficient power delivery. It includes multiple USB-C and USB-A ports, dual wireless charging pads, a digital clock, and alarm functions.
2. Safety Information
- Do NOT use uncertified USB cables.
- Do NOT expose the device to liquids.
- Do NOT place the device near heated surfaces or in high-temperature environments.
- Do NOT disassemble, modify, or repair the device yourself.
- Keep out of reach of children.
- Ensure the power input matches the specified AC 100-240V.
3. Package Contents
- ASOMETECH H688 GaN Charger Station x 1
- Power Cable x 1
4. Product Overview
The ASOMETECH H688 is a multi-functional charging station with a total output of 240W. It features a digital time display, alarm clock functions, and multiple charging ports.

4.1. Port Layout
- USB-C Ports (C1, C2, C3, C4): Four 140W PD3.1 compatible ports for fast charging laptops, tablets, and smartphones.
- USB-A Ports (A1, A2): Two 60W QC3.0 compatible ports for charging various USB-A devices.
- Wireless Charging Pad (Top): For smartphones (15W max).
- Wireless Charging Pad (Side): For smartwatches (5W max).
4.2. Control Buttons

- TIME: Used for setting the current time.
- +: Adjusts brightness up, increases numerical values during settings.
- -: Adjusts brightness down, decreases numerical values during settings.
- AL1: Toggles Alarm 1 on/off, enters Alarm 1 setting mode.
- AL2: Toggles Alarm 2 on/off, enters Alarm 2 setting mode.
- 12/24H: Switches between 12-hour and 24-hour time display.
- REST: Reset button.
5. Setup
5.1. Initial Connection
- Connect the provided power cable to the AC input port on the back of the charger station.
- Plug the power cable into a standard AC 100-240V wall outlet.
- The digital display will light up, indicating the device is powered on.
5.2. Setting the Current Time
- Press the TIME button once. The hour digits will start flashing.
- Use the + or - buttons to adjust the hour.
- Press the TIME button again. The minute digits will start flashing.
- Use the + or - buttons to adjust the minutes.
- Press the TIME button one more time to confirm and exit time setting mode.
6. Operating Instructions
6.1. Wired Charging
Connect your devices using appropriate USB-C or USB-A cables to the respective ports. The charger will automatically detect the device and deliver optimal charging power.

- USB-C Ports (C1-C4): Support PD3.1 up to 140W per port. Ideal for laptops (e.g., MacBook Pro), tablets, and fast-charging smartphones.
- USB-A Ports (A1-A2): Support QC3.0 up to 60W per port. Suitable for various USB-A powered devices.
- Simultaneous Laptop Charging: Can charge two laptops at 65W each (e.g., C1+C2: 65W+65W).
6.2. Wireless Charging

- Smartphone Wireless Charging: Place your Qi-compatible smartphone on the top wireless charging pad. Output: 15W, 10W, 7.5W, or 5W depending on the device.
- Smartwatch Wireless Charging: Place your compatible smartwatch on the side wireless charging pad. Output: 5W.
- Ensure devices are properly aligned on the charging pads for optimal performance.
6.3. Digital Clock Functions
6.3.1. Adjusting Display Brightness
Press the + or - buttons to cycle through 5 levels of display brightness. The fifth level will turn off the screen display completely.
6.3.2. Setting Alarms (AL1 and AL2)
- Press and hold the AL1 (or AL2) button for 3 seconds to enter alarm setting mode. The alarm symbol and hour digits will flash.
- Use the + or - buttons to adjust the alarm hour.
- Press the AL1 (or AL2) button again. The minute digits will flash.
- Use the + or - buttons to adjust the alarm minutes.
- Press the AL1 (or AL2) button again. The volume icon will flash.
- Use the + or - buttons to select the alarm volume level.
- Press the AL1 (or AL2) button one more time to confirm and exit alarm setting mode.
6.3.3. Turning Alarms On/Off
Short press the AL1 (or AL2) button to toggle the respective alarm on or off. When an alarm is active, its symbol will appear on the display.
6.3.4. 12/24 Hour Mode Selection
Press the 12/24H button to switch between 12-hour (with AM/PM indicator) and 24-hour time formats.
6.4. Reset Function
To reset the device, press and hold the REST button for three seconds.
7. Maintenance
- Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure all ports are free of dust and debris.
- Store the device in a cool, dry place when not in use.
8. Troubleshooting
- Device not powering on: Ensure the power cable is securely connected to both the charger station and the wall outlet. Verify the outlet is functional.
- Wired charging not working: Try a different USB cable. Ensure the device is compatible with the port (e.g., USB-C device in a USB-C port). Check if the device is properly connected.
- Wireless charging not working: Ensure your device is Qi-compatible and correctly aligned on the charging pad. Remove any thick phone cases that might interfere. Some smartwatch models or straps may not be compatible or require specific positioning.
- Clock display issues: If the clock stops or shows incorrect time after a power outage, reset the time manually. If the display is too bright or dim, adjust the brightness using the +/- buttons.
- Alarm not sounding: Ensure the alarm is turned on (symbol visible on display) and the volume is set to an audible level.
9. Specifications
| Feature | Specification |
|---|---|
| Model No. | H688 |
| Input | AC 100-240V/50-60Hz 2.5A |
| Total Output Power | 240W |
| USB-C Output (C1/C2/C3/C4) | PD3.1: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A, 28V/5A (140W Max per port) PPS: 3.3-21V/5A |
| USB-A Output (A1/A2) | QC3.0: 5V/3A, 9V/3A, 12V/3A, 20V/3A (60W Max per port) |
| Phone Wireless Charging | 15W / 10W / 7.5W / 5W |
| Watch Wireless Charging | 5W |
| Dimensions (L x W x H) | 125mm x 72mm x 90mm (4.92in x 2.83in x 3.54in) |
| GaN Technology | Yes |
| Display Screen | Yes |
| Certifications | CCC, CE, ROHS, UL, EMC |
| Safety Protections | Over-current, Over-voltage, Over-temperature, Short-circuit, Over-charge, Over-load |
10. User Tips
- The wired USB-C ports offer ultra-high-speed charging for compatible devices.
- Wireless charging for phones is generally fast, and devices tend not to overheat.
- The alarm function is a convenient feature for daily use.
- Note that if the charger station loses power, the digital clock will stop and need to be reset.
- While the wireless charging for watches works for many models (e.g., Galaxy Watch 8 Ultra), some users report issues with specific watch models or thick watch straps.
- The display brightness can be adjusted to a very low setting or even turned off, but some users find the white time display can still be glaring in dark environments.
- Using a ring-type cable for watch charging might make it difficult to position the watch correctly on the wireless pad.
11. Frequently Asked Questions (FAQ)
- Q: Can I turn off the time clock display at night?
- A: Yes, you can adjust the display brightness using the +/- buttons, including turning it off completely (the fifth brightness level).
- Q: Does the charger support wireless charging for Galaxy Watch 3/6/7?
- A: Compatibility varies. Some users report success with models like the Galaxy Watch 8 Ultra, while others experience issues with specific models or watch straps. Ensure proper positioning on the pad.
- Q: Does the plug fit sockets in Saudi Arabia?
- A: The product is available with different plug types (EU, US, UK, AU, KR, BR). Please select the appropriate plug type for your region when purchasing.
- Q: Can I charge Dell and Lenovo laptops simultaneously with iPhones and Samsung mobiles?
- A: Yes, the ASOMETECH H688 is designed for simultaneous multi-device charging. Its intelligent power distribution allows it to charge laptops and multiple mobile devices efficiently.
- Q: My Samsung Ultra Watch is not charging from the built-in wireless pad.
- A: Ensure your watch is correctly positioned on the wireless charging pad. Thick watch straps or certain watch models might interfere with the charging connection. Try repositioning or removing any obstructions.
12. Warranty and Support
12.1. Warranty Terms
The warranty period for this product begins on the date of purchase and expires after 24 months. This warranty is valid only in the country where the product was originally purchased and is non-transferable.
12.2. How to Obtain Service
If you encounter any defects due to faulty materials or workmanship within the warranty period, please contact ASOMETECH support via email at asometech_service@163.com. Please include the following details in your email:
- Your email address
- Your full name and address
- Your telephone number
- Date and place of purchase
- A detailed description of the problem you are experiencing
ASOMETECH will make arrangements for service, repair, or replacement as deemed appropriate under the warranty terms.