1. Introduction
The FOSSiBOT F1200 is a high-capacity portable power station designed to provide reliable power for various applications, from outdoor adventures to emergency home backup. Featuring a 1024Wh LiFePO4 battery and 1200W rated power, it can power up to 95% of common appliances. Its advanced Battery Management System (BMS) ensures safety and longevity, while multiple charging options and output ports offer versatility. This manual provides essential information for the safe and efficient use of your F1200.

Figure 1: FOSSiBOT F1200 Portable Power Station
2. Package Contents
Please check that all the following items are included in your package:
- 1 x FOSSiBOT F1200 Portable Power Station
- 1 x AC Charging Cable
- 1 x Car Charging Cable
- 1 x Solar Charging Cable
- 1 x Accessories Bag
- 1 x User Manual (this document)

Figure 2: Standard Packing List
3. Product Overview
3.1. Device Layout
Familiarize yourself with the various ports and controls of your FOSSiBOT F1200.

Figure 3: Front Panel

Figure 4: Rear Panel

Figure 5: Side View

Figure 6: Top View
3.2. Informative Screen
The F1200 features an informative screen that displays real-time operational data.

Figure 7: Informative Screen Details
- AC Charging Indicator
- XT60 Charge Indicator
- AC Outlet Indicator
- USB-A Port Indicator
- USB-C Port Indicator
- High/Low Temperature Warning
- Fan Status Indicator
- Total Input Power Display
- Battery Percentage
- Remaining Charge/Discharge Time
- Total Output Power Display
- Cigarette Lighter Port Indicator
- LED Light On Indicator
4. Initial Setup
Before first use, please ensure the F1200 is fully charged.
- Unpack: Carefully remove the F1200 and all accessories from the packaging.
- Inspect: Check for any visible damage to the power station or accessories. If any damage is found, do not use the device and contact customer service.
- Initial Charge: Connect the F1200 to a wall outlet using the provided AC Charging Cable. Allow the unit to charge completely until the battery indicator shows 100%.
5. Operating Instructions
5.1. Powering On/Off
- To Power On: Press and hold the main POWER button for a few seconds until the display screen illuminates.
- To Power Off: Press and hold the main POWER button again until the display screen turns off.
5.2. Charging the F1200
The F1200 supports multiple charging methods:
- AC Wall Charging: Connect the AC Charging Cable to the AC Input port on the rear panel and plug it into a standard wall outlet. The display will show the input wattage.
- Solar Charging: Connect a compatible solar panel (e.g., FOSSiBOT SP200) to the DC Input (XT60) port on the rear panel using the Solar Charging Cable. Ensure the solar panel is in direct sunlight for optimal charging.
- Car Charging: Use the Car Charging Cable to connect the F1200 to your vehicle's cigarette lighter port.
- AC + Solar Simultaneous Charging: For the fastest recharge, combine AC and solar input.

Figure 8: Fast Recharge Methods

Figure 9: Car Charging
5.3. Discharging (Using Output Ports)
The F1200 provides various output ports to power your devices:
- AC Outlets: Press the 'AC ON/OFF' button to activate the AC outlets. Plug in your AC-powered devices.
- USB Ports (USB-A, USB-C): Press the 'USB ON/OFF' button to activate the USB ports. Connect your USB-powered devices.
- DC Output (Car Outlet): Press the 'DC ON/OFF' button to activate the car outlet.

Figure 10: Powering Multiple Devices
5.4. LED Light Modes
The F1200 includes an integrated LED light with three modes:
- Light Mode: Press the 'LIGHT ON/OFF' button once for standard illumination.
- SOS Mode: Press the 'LIGHT ON/OFF' button twice for an SOS signal.
- Strobe Mode: Press the 'LIGHT ON/OFF' button three times for a strobe effect.

Figure 11: LED Light Modes
5.5. UPS Functionality
The F1200 can function as an Uninterruptible Power Supply (UPS) with a switchover time of less than 10ms. When connected to an AC power source and simultaneously powering devices, it will automatically switch to battery power in case of a power outage, ensuring continuous operation for critical devices.

Figure 12: UPS Function in Action
5.6. Charging Speed Adjustment
The F1200 allows you to adjust the input power from 200W to 1000W using the rotating 'Input Regulator' knob on the front panel. This provides flexibility for faster or slower charging depending on your needs and available power source.
6. Specifications
| Category | Specification |
|---|---|
| General | Brand: FOSSiBOT Type: Portable Power Station Model: F1200 Color: Black |
| Battery Info | Capacity: 1024Wh Type: LiFePO4 (LFP) Lifecycle: 4000 cycles to 80%+ capacity System Management: BMS (Battery Management System) |
| Output | Rated Power: 1200W AC Outlet: 2 x 220V-240V, 50/60Hz, Pure Sine Wave Max. 1200W, Surge Peak 2400W Car Outlet: 1 x 12V/8A, 24V/8A, 96W Max. USB-A: 2 x 5V/3A, 9V/2A, 12V/1.5A, 18W Max. USB-C: 1 x 20W Max, 1 x 100W Max. |
| Input | AC Charging Input: 1000W Max. Solar Input: 12V-50V/8A 200W Max. Car Input: 12V/8A, 24V/8A from Cigarette Lighter Port AC + Solar Input: 1200W (with AC and Solar Input Simultaneously) |
| Recharge Times | AC Recharge (1000W): ≈70mins (0-100%) Solar Recharge (200W): ≈6.5 Hours (0-100%, with prime sunshine, ideal orientation) Car Recharge (96W): ≈10.67 Hours (0-100%) AC+Solar Recharge (1200W): ≈1 Hr (0-100%, with prime sunshine, ideal orientation) |
| Operating Conditions | Simultaneous Recharge & Discharge: Supported Operating Temperature: 5-140℉ (-15-60℃) Charging Temperature: 32-131℉ (0°-55℃) |
| Physical Characteristics | Product Weight: 11kg Package Weight: 14kg Package Size (L x W x H): 29cm x 23cm x 25cm |
| LED Light Modes | Light Mode, SOS Mode, Strobe |

Figure 13: BMS Protection Mechanisms

Figure 14: Pure Sine Wave Output
7. Maintenance and Care
7.1. Battery Longevity
To maximize the lifespan of your FOSSiBOT F1200's LiFePO4 battery:
- When not in use for extended periods, keep the power station charged at 20% or more.
- If stored for a long time, recharge the unit once every three months to maintain battery health.

Figure 15: LiFePO4 Battery Lifespan
7.2. General Care
- Avoid Water: The F1200 is NOT waterproof. Do not use or charge it in wet environments to prevent accidents and damage.
- Temperature: Operate and charge within the specified temperature ranges (Operating: -15-60℃; Charging: 0°-55℃).
- Cleaning: Use a dry, soft cloth to clean the exterior of the power station. Do not use harsh chemicals or abrasives.
8. Troubleshooting
8.1. Automatic Shutdown
Issue: The F1200 turns off automatically.
Reason: To protect the machine and prolong battery life, the F1200's AC and DC output ports will automatically turn off after 8 hours of inactivity. USB ports will turn off after 5 minutes of inactivity. If all discharge ports are off, the main power button will turn off after 5 minutes of no operation.
Solution: Simply press the main POWER button to turn the unit back on and reactivate the desired output ports.
8.2. Battery Replacement
Issue: The internal battery pack malfunctions or is dead.
Solution: The built-in battery is not user-replaceable. Please contact FOSSiBOT Customer Service for assistance.
9. User Tips
- For optimal solar charging, ensure your solar panels are positioned for prime sunshine and ideal orientation.
- While simultaneous charging and discharging is safe, it may slow down the charging process.
- The F1200's pure sine wave output is safe for sensitive electronics, providing power quality comparable to the grid.
10. Frequently Asked Questions (FAQ)
Q: How do I charge FOSSiBOT F1200 with solar power?
A: FOSSiBOT F1200 works with most solar panels, but we recommend using FOSSiBOT SP200 panels for best compatibility. To charge, just plug your panel into the DC port behind the portable power station. Use the included adapter and charging cables.
Q: Can FOSSiBOT F1200 charge and discharge at the same time?
A: Yes, it can charge your device while it's charging, and the process is safe, but it will slow down your charging process.
Q: How long can the FOSSiBOT F1200 run on my device?
A: Running time = Battery capacity × η × DoD / Equipment power rating. "DoD" refers to the depth of discharge and "η" is the local inverter efficiency. For the FOSSiBOT F1200, both DoD and η are almost 92%. For example, if you use it to run a 500W heater, the run time will be: 1024Wh x 92% x 92% ÷ 500W ≈ 1.5hrs.
Note:
1. The formula is not suitable for inductive loads with compressors, such as refrigerators, air conditioners, etc.
2. The above data is for reference only.
Q: Can I connect 2 x 200W solar panels to recharge FOSSiBOT F1200?
A: No, it supports 200W Max solar input and can be recharged in as little as 6.5 hours under full sunlight.
Q: Why does my F1200 turn off automatically?
A: To protect your machine as well as prolong the battery use time, F1200 AC output and DC output ports will be turned off automatically after 8 hours of unuse. USB ports will be turned off after 5 minutes of unuse. When all discharge ports are in a turned-off state, the main power button will be turned off after 5 minutes of no operation.
Q: When should I recharge the FOSSiBOT F1200 when I don't use it?
A: To better extend its lifespan, we recommend keeping it charged at 20% or more when you're not using it, and if you don't use it for a long time, please keep it charged once every three months.
Q: Is the FOSSiBOT F1200 power station waterproof?
A: No, it is not waterproof, please do not use or charge it in a wet environment to prevent accidents.
Q: Can FOSSiBOT F1200 be used as an uninterruptible power supply (UPS)?
A: Yes, with 10ms of switchover time, the power station can serve as a UPS during power outages to keep essential devices functioning.
Q: Is it possible to replace the built-in battery?
A: No. If the internal battery pack malfunctions or is dead, please contact Fossibot Customer Service.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official FOSSiBOT website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.