UGREEN BT505

Contents

UGREEN Bluetooth 3.5mm RCA LDAC Audio Receiver

Model: BT505

User Manual

1. Introduction

The UGREEN BT505 Bluetooth 6.0 Audio Receiver is designed to bring high-resolution wireless audio to your existing audio systems. With support for LDAC, AAC, and SBC codecs, it delivers exceptional sound quality and a stable connection. This manual provides detailed instructions for setting up, operating, and maintaining your device.

UGREEN Bluetooth 6.0 Hi-Res Audio Wireless LDAC receiver

Image 1: UGREEN Bluetooth 6.0 Hi-Res Audio Wireless LDAC receiver.

2. Package Contents

Please check the package for the following items:

  • 1 x UGREEN BT505 Bluetooth Audio Receiver
  • 1 x USB-C Charging Cable (3FT/1M)
  • 1 x 3.5mm Audio Cable (3FT/1M)
  • 1 x User Manual
Package contents and device dimensions

Image 2: Package contents and device dimensions (2.62 x 2.03 x 0.78 inches). Shows USB-C Charging Port, RCA Audio Output, 3.5mm Audio Output, and LED Light.

3. Setup

3.1 Device Overview

Familiarize yourself with the ports and buttons on your UGREEN BT505 receiver:

  • Multi-function Button: For power on/off, pairing, play/pause, and factory reset.
  • USB-C Charging Port (IN 5V): For charging the device.
  • RCA Audio Output (L-AUDIO-R): For connecting to audio systems with RCA inputs.
  • 3.5mm Audio Output (AUX): For connecting to audio systems with 3.5mm AUX inputs.
  • LED Light: Indicates device status (power, pairing, battery, codec).
Product image showing the receiver with 3.5mm audio cable and USB-C charging cable, highlighting ports.

Image 3: UGREEN BT505 receiver with included cables, showing USB-C, RCA, and 3.5mm ports.

3.2 Charging the Device

Before first use, fully charge the receiver. Connect the provided USB-C charging cable to the IN 5V port on the receiver and the other end to a 5V USB power adapter (not included).

  • Charging: The red LED light stays on.
  • Fully Charged: The red LED light turns off.
Device charging while playing music

Image 4: The receiver can be charged and used simultaneously.

3.3 Connecting to an Audio System

The BT505 offers multiple connection options to your audio system:

  • Using 3.5mm AUX: Connect one end of the 3.5mm audio cable to the AUX port on the receiver and the other end to the 3.5mm AUX input of your speaker, amplifier, or car radio.
  • Using RCA: Connect the RCA audio cables (not included, but the receiver has RCA output ports) to the L-AUDIO-R ports on the receiver and the other ends to the corresponding RCA inputs (red for right, white for left) on your amplifier or speaker system.
Diagram of multiple connection options for the Bluetooth receiver

Image 5: Connection diagrams showing 3.5mm AUX OUT to RCA IN (e.g., amplifier) and RCA OUT to AUX IN (e.g., speaker).

Compatible devices and connection types

Image 6: Examples of compatible devices including speakers, amplifiers, headsets, and car radios.

4. Operating Instructions

4.1 Power On/Off

  • Power On: Press and hold the Multi-function Button for 3 seconds. The blue light will stay on for one second, and you will hear "Power on".
  • Power Off: Press and hold the Multi-function Button for 3 seconds. The red light will stay on for one second, and you will hear "Power off".

4.2 First Pairing

When powering on for the first time (no connection history), the device automatically enters pairing mode.

  1. Ensure the receiver is connected to your speaker or audio system via the 3.5mm or RCA port.
  2. The receiver will automatically enter pairing mode, indicated by red and blue lights flashing alternately. You will hear "Pairing".
  3. On your phone or other Bluetooth device, enable Bluetooth and search for "UGREEN-BT505".
  4. Select "UGREEN-BT505" to pair.
  5. Once connected successfully, the blue light will flash once every ten seconds.
First pairing instructions for UGREEN Bluetooth receiver

Image 7: Visual guide for first-time pairing.

4.3 Dual Pairing (Connecting Two Devices Simultaneously)

The BT505 supports connecting to two Bluetooth devices at the same time.

  1. Connect the first device as described in "First Pairing".
  2. To connect a second device, double-click the Multi-function Button on the receiver. The red and blue lights will flash alternately, indicating it's in pairing mode.
  3. On your second phone or Bluetooth device, search for "UGREEN-BT505" and pair.
  4. Once both devices are connected, the blue light will flash once every ten seconds.

Note: When using dual-device mode, you need to pause music on one device before playing on the other.

Dual pairing instructions for UGREEN Bluetooth receiver

Image 8: Visual guide for dual pairing.

4.4 Play/Pause

While music is playing, press the Multi-function Button once to play or pause the audio.

4.5 Auto Reconnect

If the receiver has a connection history, it will automatically attempt to reconnect to the last paired device within 16 seconds after powering on. If reconnection fails, it will enter pairing mode. During auto-reconnection, the blue light flashes once every five seconds.

4.6 Restore Factory Settings (Clear ID Records)

To clear all pairing records and restore factory settings:

  1. Ensure the device is powered on.
  2. Press and hold the Multi-function Button for ten seconds.
  3. The blue light will stay on for five seconds, then the device will automatically power off and enter pairing mode after completion.

4.7 Indicator Light Status and Voice Notifications

Function How to Use Indicator Light Voice Notification Note
Power on Press the Multi-function Button for 3 Seconds The blue light stays on for one second Power on /
Power off Press the Multi-function Button for 3 Seconds The red light stays on for one second Power off /
Enter pairing mode Double-click the "Multi-function button" when powered on Red and Blue Lights Flash Alternately Pairing
  1. First power-on (no connection history), automatically enters pairing mode.
  2. In no connection state, double-click the multi-function button to enter pairing mode (if not connected within 5 minutes in pairing mode, it will automatically turn off).
  3. In the connected dual-device mode, double-click to disconnect the device that is not playing music or the first device that was connected.
Pairing successful / The Blue Light Flashes Once Every Ten Seconds Bluetooth Connected When the phone is playing music, the indicator light will turn on according to the codec used. The indicator light will flash every 3 seconds. The status of the indicator light for different codecs is as follows: SBC: Cyan, AAC: Blue, LDAC: Green.
Play / Pause Press the "Multi-function button" once while music is playing / / /
Power-on auto reconnect If there is a connection history, the product will automatically reconnect within 16 seconds after powering on. If the reconnection fails, it will enter pairing mode. The Blue Light Flashes Once Every Five Seconds / /
Restore factory settings (Clear ID records) Press the "Multi-function button" for ten seconds when power on The blue light stays on for five seconds / Automatically power on and enter pairing mode after completion
Low battery warning / The Red Light Flashes Once Every Ten Seconds low battery /
Charging / Red light stays on. Fully charged: Red light turns off. / The red charging indicator light is located above the power input, different from the position of the product status indicator light.

Image 9: Detailed table of functions, indicator lights, and voice notifications.

5. Specifications

Feature Detail
Brand Name UGREEN
Model BT505
Wireless Type Bluetooth
Bluetooth Version 6.0 (Implied from images, JSON states 'Bluetooth' for Wireless Type)
Frequency Band 2400MHz-2483.5MHz
Max. RF Output Power 4dBm (EIRP)
Transmission Distance 10m/33ft (no blocking)
Bluetooth Profile A2DP/AVRCP/HSP/HFP
Codecs SBC/AAC/LDAC
Frequency Response 20Hz-40kHz
Audio Port 3.5mm/2RCA
Charging Port USB-C
Battery Type Polymer lithium-ion battery
Battery Capacity 300mAh 3.7V (1.11Wh)
Limited Charging Voltage 5.25V
Charging Time About 2 hours
Operating Time About 15 hours
Dimensions (L x W x H) 2.62 x 2.03 x 0.78 inches (approx. 66.5 x 51.6 x 19.8 mm)
Weight 0.15 kg (approx. 5.3 oz)

Image 10: Diagram showing Bluetooth 6.0 chip for lower latency and stable connection.

Bluetooth 6.0 chip diagram

6. Troubleshooting

  • Device won't power on: Ensure the device is charged. Connect it to a power source using the USB-C cable.
  • Cannot pair with a device:
    • Make sure the receiver is in pairing mode (red and blue lights flashing alternately). If not, double-click the Multi-function Button.
    • Ensure Bluetooth is enabled on your source device (phone, tablet, etc.).
    • Move the receiver closer to your source device.
    • Clear previous pairing records on both the receiver (factory reset) and your source device's Bluetooth settings.
  • No sound after connecting:
    • Check if the receiver is correctly connected to your audio system (3.5mm or RCA).
    • Ensure the volume on both your source device and audio system is turned up.
    • Verify that the correct input source is selected on your audio system.
  • Poor sound quality or intermittent connection:
    • Reduce the distance between the receiver and your source device.
    • Remove any obstacles (walls, large objects) that may interfere with the Bluetooth signal.
    • Avoid placing the receiver near other wireless devices that may cause interference (e.g., Wi-Fi routers, microwaves).
    • Ensure your source device supports LDAC for the best audio quality.
  • Low battery warning: The red light flashes every ten seconds, and you hear "low battery". Recharge the device promptly.
No worry about Bluetooth disconnection, showing stable connection with TV

Image 11: The device is designed for stable Bluetooth connection.

7. User Tips

  • For optimal audio quality, ensure your streaming device supports LDAC and that the LDAC codec is active.
  • Keep the receiver within the recommended 10m/33ft range for the most stable connection.
  • The compact size of the receiver makes it highly portable, allowing you to enjoy high-fidelity audio on the go.
Tiny size, powerful sound, showing the receiver in a pocket

Image 12: The compact design allows for portable use.

8. Maintenance

  • Clean the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.
  • Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
  • Do not attempt to disassemble or repair the device yourself, as this will void the warranty and may cause damage.
  • Store the device in a cool, dry place when not in use for extended periods.

9. Safety Information

  • Keep the device away from water and other liquids.
  • Do not drop, hit, or shake the device.
  • Dispose of the battery according to local regulations. Do not dispose of it in household waste.
  • Keep out of reach of children.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.