1. Product Overview
The BEAR YSJ-E40T8 is a compact and efficient desktop water dispenser designed to provide instant hot or ambient water for your daily needs. Featuring a durable 316L stainless steel water tank, precise temperature control, and multiple dispensing volumes, it offers convenience and healthy drinking water for your home or office.
2. Setup Instructions
- Unpack the Device: Carefully remove the water dispenser and all accessories from the packaging. Place the unit on a stable, flat surface, away from direct sunlight and heat sources.
- Install Drip Tray: The magnetic drip tray is designed for easy attachment. Simply align it with the base of the dispenser until it clicks into place.
- Fill Water Tank: Open the lid of the water tank located at the top of the unit. Fill the 3L tank with clean, potable water. Ensure the water level does not exceed the maximum fill line. Close the lid securely.
- Initial Cleaning (First Use): Before first use, it is recommended to perform a self-cleaning cycle. Plug the dispenser into a suitable power outlet (220V, 50Hz). The unit features a "one-key self-cleaning" function. Refer to the operating section for details on initiating this cycle. Dispense and discard the first few cups of water to ensure cleanliness.
3. Operating Instructions
The BEAR YSJ-E40T8 offers instant heating and precise control over water temperature and volume.
3.1 Control Panel
The control panel is located on the top of the unit and features a smart display screen and various buttons for temperature and volume selection.
3.2 Dispensing Water
- Select Temperature: Use the temperature control buttons to choose from 6 adjustable water temperatures. The smart display will show the selected temperature.
- Select Volume: Choose from 3 fixed water dispensing volumes using the volume selection buttons.
- Dispense: Place your cup or container under the spout. Press the dispense button to start the water flow. The unit provides hot water in approximately 1 second. Press the button again to stop dispensing if needed.
3.3 Instant Heating Technology
The YSJ-E40T8 utilizes advanced instant heating technology to provide water at your desired temperature almost immediately, eliminating the need for pre-heating or waiting.
4. Maintenance
- One-Key Self-Cleaning: Regularly use the integrated one-key self-cleaning function to maintain hygiene of the internal water paths. Refer to the operating section for how to initiate this cycle.
- Drip Tray Cleaning: The magnetic drip tray is removable for easy cleaning. Detach it, empty any collected water, wash with mild soap and water, rinse thoroughly, and dry before reattaching.
- Exterior Cleaning: Wipe the exterior of the dispenser with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Water Tank: The 316L stainless steel water tank is designed to resist moss growth. However, periodic inspection and cleaning (if necessary) are recommended. Ensure the tank is completely dry if storing the unit for an extended period.
- Mineral Core: The dispenser features a metasilicic acid and strontium-rich active mineral core. Follow manufacturer guidelines for replacement frequency to ensure optimal water quality.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/Unit not turning on | Power cord not plugged in; Power outlet malfunction; Unit switch off | Ensure power cord is securely plugged in; Test outlet with another device; Check if the main power switch (if any) is on. |
| No water dispensed | Water tank empty; Airlock in system; Dispensing button not pressed correctly | Refill water tank; Perform a self-cleaning cycle to clear air; Ensure button is pressed firmly. |
| Water not hot enough | Incorrect temperature setting; Heating element malfunction | Verify the selected temperature setting; If problem persists, contact customer support. |
| Strange taste or odor in water | First use residue; Mineral core needs replacement; Contaminated water source; Infrequent cleaning | Perform initial cleaning cycle; Replace mineral core as per schedule; Use clean, potable water; Increase frequency of self-cleaning. |
| Water leakage | Drip tray full; Water tank not seated correctly; Internal component damage | Empty and re-seat drip tray; Ensure water tank is properly installed; Discontinue use and contact support if internal leakage is suspected. |
If you encounter issues not listed here or if the problem persists after attempting the solutions, please contact customer support.
6. Specifications
| Feature | Specification |
|---|---|
| Model | YSJ-E40T8 |
| Rated Voltage | 220V |
| Rated Frequency | 50Hz |
| Rated Power | 2100W |
| Product Net Weight | 2.7 kg |
| Water Tank Capacity | 3 Liters |
| Water Tank Material | 316L Stainless Steel |
| Dimensions (W x D x H) | 150mm x 332mm x 320mm |
| Color | Silver |
| Water Dispenser Type | Monothermal (single temperature output at a time) |
7. User Tips
- For optimal taste and to prolong the life of the mineral core, consider using filtered water to fill the tank.
- Experiment with different temperature settings to find the perfect heat for your coffee, tea, or instant meals.
- Regularly check the water level to avoid running the unit dry, which can affect performance.
- Utilize the magnetic drip tray's easy removal feature for quick and frequent cleaning to maintain hygiene.
8. Warranty and Support
For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your seller directly.
For technical support or inquiries, you may contact the seller:
- Email: Hnjintong0339@126.com
- WhatsApp: +86 19573101309
