1. Introduction
Thank you for purchasing the Joyroom JR-ML05 Bluetooth 5.3 RGB Wireless Speaker. This manual provides important information regarding the setup, operation, maintenance, and specifications of your new speaker. Please read this manual thoroughly before using the product to ensure proper function and to maximize your listening experience.
Figure 1: Joyroom JR-ML05 Bluetooth Speaker
2. Package Contents
Please check the package for the following items:
- Joyroom JR-ML05 Bluetooth Speaker
- USB Type-C Charging Cable
- User Manual (this document)
3. Product Overview
The Joyroom JR-ML05 is a portable wireless speaker featuring 8W output power, vibrant RGB lighting, and Bluetooth 5.3 connectivity. It includes a built-in microphone for calls and supports TF card playback.
3.1 Control Buttons and Ports
Figure 2: Top Panel Controls
- - (Volume Down): Press to decrease volume.
- + (Volume Up): Press to increase volume.
- ▶▶ (Play/Pause): Press to play or pause audio.
- ○ (Power/Mode): Press and hold to power on/off. Short press to switch modes (Bluetooth/TF Card).
- USB Type-C Charging Socket: For charging the speaker.
- TF Card Socket: Insert a TF card (up to 32GB) for MP3 playback.
- Built-in Microphone: For hands-free calling.
4. Setup
4.1 Charging the Speaker
- Connect the provided USB Type-C charging cable to the speaker's charging socket.
- Connect the other end of the cable to a compatible USB power adapter (not included).
- The charging indicator will illuminate. A full charge takes approximately 3.5 hours.
- Once fully charged, the indicator light may change or turn off. Disconnect the charging cable.
4.2 Bluetooth Pairing
- Ensure the speaker is fully charged.
- Press and hold the Power/Mode button (○) to turn on the speaker. It will enter Bluetooth pairing mode, indicated by a flashing light or audible prompt.
- On your mobile device, enable Bluetooth and search for available devices.
- Select "JR-ML05" from the list of devices.
- Once paired, the speaker will provide an audible confirmation, and the indicator light will become solid.
- The effective Bluetooth range is 5-10 meters.
5. Operating Instructions
5.1 Power On/Off
- Power On: Press and hold the Power/Mode button (○) for a few seconds.
- Power Off: Press and hold the Power/Mode button (○) for a few seconds.
5.2 Audio Playback
- Bluetooth Mode: After successful pairing, play audio from your connected device.
- TF Card Mode: Insert a TF card (with MP3 files) into the TF Card Socket. The speaker will automatically switch to TF card mode and begin playback. If it doesn't, short press the Power/Mode button (○) to cycle through modes.
- Play/Pause: Press the Play/Pause button (▶▶).
- Volume Control: Press the '+' button to increase volume, and the '-' button to decrease volume.
5.3 Hands-Free Calling
When connected via Bluetooth, the built-in microphone allows for hands-free calls:
- Answer Call: Press the Play/Pause button (▶▶).
- End Call: Press the Play/Pause button (▶▶) during a call.
- Reject Call: Press and hold the Play/Pause button (▶▶).
5.4 RGB Lighting
The speaker features eye-catching RGB lighting with different display modes. The lighting automatically activates with the speaker and cycles through various patterns. There is no explicit control for changing RGB modes mentioned in the provided information, so it operates automatically.
Figure 3: Speaker with RGB Lighting in use
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker's surface. Do not use abrasive cleaners or solvents.
- Water Resistance: The speaker is splashproof. Avoid submerging it in water or exposing it to heavy rain.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, charge the speaker regularly, even if not in frequent use. Avoid fully depleting the battery for extended periods.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery. | Charge the speaker fully. |
| No sound. | Volume too low; not paired; incorrect mode. | Increase volume on speaker and device. Ensure successful Bluetooth pairing. Check if the correct mode (Bluetooth/TF Card) is selected. |
| Cannot pair via Bluetooth. | Speaker not in pairing mode; device Bluetooth off; too far apart. | Ensure speaker is in pairing mode. Turn Bluetooth on/off on your device. Move speaker and device closer. |
| TF card not playing. | Card not inserted correctly; unsupported file format; card capacity exceeded. | Reinsert TF card. Ensure files are MP3 format. Use a TF card up to 32GB. Short press Power/Mode button to switch to TF card mode. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Joyroom |
| Model | JR-ML05 |
| Maximum Power | 8W |
| Material | ABS |
| RGB Backlight | Yes |
| Charging Socket | USB Type-C |
| TF Card Socket | 32GB Max |
| Bluetooth Version | 5.3 |
| Sound Codec | SBC |
| Bluetooth Protocols | HSP, HFP, A2DP, AVRCP |
| Battery Capacity | 1500 mAh |
| Charging Time | Approx. 3.5 hours |
| Playback Time | Up to 3 hours (at 70% volume) |
| Weight | 490g |
| Connectivity Option | Wireless |
| Effective Distance | 5m (inclusive) - 10m (not inclusive) |
| Certification | CPNP |
Figure 4: Internal Component Diagram
9. User Tips
Based on general usage patterns for similar devices, here are some tips:
- For optimal sound quality, ensure the speaker is placed on a stable surface and not obstructed.
- Keep the speaker within the effective Bluetooth range (5-10 meters) for a stable connection.
- While splashproof, avoid exposing the speaker to excessive moisture or direct water jets.
- If experiencing connection issues, try restarting both the speaker and your Bluetooth device.
Note: No specific user reviews or Q&A were provided for product-specific tips.
10. Warranty and Support
Joyroom products are manufactured to high-quality standards. For any issues or support inquiries, please refer to the seller or manufacturer's official support channels. Keep your purchase receipt as proof of purchase for warranty claims.