Introduction
The TWS Joyroom JR-TC1 IceLens Series wireless headphones combine modern audio technology with a unique design. Featuring advanced Bluetooth 5.3 technology, they provide a stable and fast connection. The 13mm speakers with a biofiber membrane guarantee clean and powerful audio. The transparent case with a sliding design offers ease of use, and intuitive sound control makes every interaction a pleasure. With the Joyroom JR-TC1 headphones, your music experience becomes truly special.
Joyroom JR-TC1 IceLens Series Wireless Headphones with LED Lights and transparent charging case.
Another view of the Joyroom JR-TC1 headphones and charging case, highlighting the transparent design and USB-C charging port.
Setup
1. Initial Charging
Before first use, fully charge the headphones and the charging case. Connect the provided USB-C cable to the charging port on the case and to a 5V/1A power source. The charging time for both the headphones and the case is approximately 1.5 hours.
Rear view of the charging case, showing specifications and charging port.
2. Pairing with a Device
- Ensure the headphones are charged and placed in the charging case.
- Open the charging case. The headphones will automatically enter pairing mode (indicated by LED lights).
- On your device (smartphone, tablet, etc.), go to Bluetooth settings and turn on Bluetooth.
- Search for available devices and select "JR-TC1" from the list.
- Once connected, you will hear a confirmation tone, and the LED indicators on the earbuds will change.
The headphones will automatically reconnect to the last paired device when taken out of the case, if Bluetooth is enabled on the device.
Operating Instructions
Touch Controls
The Joyroom JR-TC1 headphones feature intuitive touch controls on each earbud for easy management of music and calls.
- Play/Pause Music: Single tap on either earbud.
- Next Song: Double tap on the right earbud.
- Previous Song: Double tap on the left earbud.
- Answer/End Call: Single tap on either earbud.
- Reject Call: Press and hold either earbud for 2 seconds.
- Activate Voice Assistant: Triple tap on either earbud.
- Volume Control: (Specific gesture not provided, typically long press or multiple taps. Refer to product for exact functionality or control via connected device.)
LED Backlight Modes
The headphones offer four distinct LED backlight modes to enhance your visual experience. The method to cycle through these modes is typically via a specific touch gesture (e.g., press and hold a specific earbud for a few seconds, or a specific tap sequence). Please refer to the product packaging or quick start guide for the exact gesture to change LED modes.
Blue LED mode
Green LED mode
White LED mode
Maintenance
- Cleaning: Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth. Avoid using harsh chemicals or abrasive materials.
- Storage: When not in use, store the headphones in their charging case to protect them from dust and damage.
- Battery Care: To prolong battery life, avoid exposing the headphones and case to extreme temperatures. Charge them regularly, even if not used frequently.
- Water Resistance: The product's water resistance rating is not specified. Avoid exposure to water or moisture to prevent damage.
Troubleshooting
No Sound / Poor Sound Quality
- Ensure the headphones are properly paired with your device.
- Check the volume level on both the headphones and your device.
- Make sure the headphones are sufficiently charged.
- Clean any debris from the earbud speakers.
Connection Issues
- Ensure Bluetooth is enabled on your device.
- Move closer to your device; the effective range is approximately 10 meters in open space.
- Try unpairing and re-pairing the headphones with your device.
- Restart your device and the headphones.
Charging Problems
- Verify that the USB-C cable is securely connected to both the charging case and the power source.
- Try using a different USB-C cable or power adapter.
- Ensure the charging contacts on the earbuds and inside the case are clean and free of debris.
One Earbud Not Working
- Place both earbuds back into the charging case, close the lid, and then take them out again to reset the connection.
- Ensure both earbuds are charged.
- Try re-pairing the headphones with your device.
Specifications
| Feature | Detail |
|---|---|
| Brand | Joyroom |
| Model | JR-TC1 |
| Bluetooth Version | 5.3 |
| Audio Codecs | AAC, SBC |
| Supported Protocols | HFP, A2DP, AVRCP |
| Operating Frequency | 2402-2483.5MHz |
| Maximum Output Power | 4 ± 1dBm (EIRP) |
| Bluetooth Range | 10 m (in open space) |
| Transmission Band Range | 20Hz-20KHz |
| Speaker Size | φ 13mm (with biofiber membrane) |
| Music Playback Time (Lights Off) | Approx. 6 hours (at 70% volume) |
| Music Playback Time (Lights On) | Approx. 3 hours (at 70% volume) |
| Call Time (Lights Off) | Approx. 4 hours (at 70% volume) |
| Call Time (Lights On) | Approx. 2 hours (at 70% volume) |
| Standby Time (after connection) | Approx. 120 hours |
| Headphone Battery Capacity | 35 mAh |
| Charging Case Battery Capacity | 400 mAh |
| Headphone Charging Time | Approx. 1.5 hours |
| Charging Case Charging Time | Approx. 1.5 hours |
| Number of Charging Cycles (from case) | Approx. 4 cycles |
| Charging Port | USB-C |
| Housing Input Power | 5V / 1A |
| Material | ABS, PC |
| Color | Black |
| Weight | 0.287 kg |
| Connectivity Option | Wireless (Bluetooth) |
| Length/Effective Distance | 5m (inclusive) - 10m (not inclusive) |
User Tips
- Experiment with LED Modes: Discover your favorite LED backlight mode to match your mood or style.
- Keep Case Charged: Always keep your charging case charged to ensure your earbuds are ready for extended use on the go.
- Master Touch Controls: Familiarize yourself with the touch gestures for seamless control of your music and calls without needing to access your connected device.
- Optimal Fit: Ensure a snug fit for the best sound quality and comfort.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact the seller/manufacturer directly. Keep your proof of purchase for warranty claims.