1. Introduction
Thank you for choosing the LS VISION Solar Powered PTZ Security Camera. This manual provides essential information for the proper installation, operation, and maintenance of your camera. Please read it thoroughly before use and keep it for future reference.
Key Features:
- High Definition Video: 2K Ultra HD resolution for clear imaging.
- Flexible Connectivity: Available in 4G SIM card version (no WiFi) or 2.4GHz WiFi version (no 4G).
- Solar Powered: Equipped with a 6-watt solar panel and built-in 10000mAh battery for continuous operation.
- Pan & Tilt Functionality: 240° horizontal pan and 100° vertical tilt for comprehensive coverage.
- Smart Detection: PIR motion detection for human and animal activity, reducing false alarms.
- Two Night Vision Modes: Infrared (black and white) and full-color night vision options.
- Two-Way Audio: Built-in microphone and speaker for real-time communication.
- Weatherproof Design: IP66 rated for outdoor use, resistant to dust and water.
- Remote Monitoring: Access live video and playback via the Ubox mobile application.
- Storage Options: Supports Micro SD card (up to 128GB, not included) and cloud storage (subscription required).
2. Package Contents
Please check the package to ensure all items are present and in good condition:
- LS VISION Solar Powered PTZ Camera
- Solar Panel (with 3m extension cable)
- Tie Straps
- Screw Accessories (screws, wall plugs)
- Charging Cable
- Positioning Paper
- User Manual
Image: All items included in the LS VISION Solar Powered PTZ Security Camera package.
3. Product Overview
Familiarize yourself with the camera's components:
Image: Detailed diagram of the camera with labeled parts and dimensions.
- Solar Panel: Charges the internal battery.
- Antenna: For WiFi or 4G signal reception.
- Lens: 3.6mm lens for video capture.
- White Light & IR Light: For night vision illumination.
- PIR Sensor: Passive Infrared sensor for motion detection.
- ON/OFF Switch: Power control for the camera.
- Charging Interface: For connecting the solar panel or external power.
- 4G Card Slot (4G Version Only): For inserting a 4G data SIM card.
- Memory Card Slot: For inserting a Micro SD card (up to 128GB).
- Reset Key: For factory reset (usually a small pinhole button).
4. Installation
4.1 Initial Setup & Charging
- Before first use, ensure the camera is fully charged. Connect the solar panel or the charging cable to the camera and allow it to charge for approximately 10 hours.
- Turn on the camera using the ON/OFF switch.
4.2 Choosing Your Camera Version (4G vs. WiFi)
Your camera comes in two versions: 4G or WiFi. Please identify your version as they have different connectivity requirements.
Image: Comparison of 4G and WiFi camera versions.
4G Camera Version:
- Requires a 4G data SIM card (not included).
- Does NOT support WiFi connection.
- Insert the 4G SIM card into the designated slot. Ensure the SIM card does not have a PIN password enabled.
Image: 4G Camera Version with SIM card slot.
2.4G WiFi Camera Version:
- Requires a 2.4GHz WiFi network.
- Does NOT support 4G SIM card connection.
Image: 2.4G WiFi Camera Version connected to a router.
4.3 Mounting Options
The camera offers versatile installation methods to suit various outdoor environments:
Image: Camera installed on a tree, detecting wildlife.
- Integrated Installation: Mount the camera and solar panel together.
- Split Installation: Mount the camera and solar panel separately using the 3m extension cable for optimal solar exposure.
- Strap Installation: Use the provided tie straps to secure the camera to poles or trees.
- Screw Installation: Use the provided screws and wall plugs for mounting on walls or other solid surfaces. Use the positioning paper to mark drill holes accurately.
Ensure the camera is positioned to capture the desired area and the solar panel receives maximum sunlight throughout the day.
5. Ubox App Setup
The Ubox app is required for camera configuration and remote monitoring.
- Download the App: Scan the QR code in the user manual (included in the package) or search for 'Ubox' in your mobile device's app store (iOS/Android).
- Register/Login: Create a new account or log in if you already have one.
- Add Device: Follow the in-app instructions to add your camera. This typically involves scanning a QR code on the camera or manually entering its ID.
- Network Configuration:
- For WiFi Camera: Connect the camera to your 2.4GHz WiFi network via the app.
- For 4G Camera: Ensure your 4G SIM card is inserted correctly and has an active data plan. The camera will connect automatically.
- Initial View: Once connected, you should see the live video feed from your camera.
Image: Live video monitoring through the Ubox app.
6. Operation
6.1 Live Video & Remote Monitoring
Access the Ubox app on your smartphone to view live video from your camera anytime, anywhere. The app interface allows you to control various camera functions.
Video: Product demonstration showcasing installation, app control, and features of the solar PTZ camera.
6.2 PTZ Control
The camera features Pan-Tilt-Zoom (PTZ) functionality, allowing you to adjust the viewing angle remotely through the Ubox app. It supports 240° pan and 100° tilt.
Image: Controlling camera pan and tilt via the Ubox app.
6.3 Motion Detection (Human/Animal)
The camera uses PIR motion detection to identify human and animal movement, triggering automatic video recording and sending message pushes to your Ubox app. This helps reduce false alarms from other environmental factors.
Image: Ubox app notification for detected activity.
6.4 Two-Way Audio
Utilize the built-in microphone and speaker for two-way voice intercom. You can listen to the environment around the camera and speak through the camera from your mobile device.
Image: Using two-way voice intercom via the Ubox app.
6.5 Night Vision Modes
The camera offers two night vision modes:
- Infrared Night Vision: Provides clear black and white video in low-light conditions.
- Color Night Vision: Utilizes white lights to provide full-color video at night.
You can easily switch between these modes in the live view page of the Ubox app.
Image: Comparison of Infrared and Color Night Vision.
6.6 Arming Time Setting
You can set specific 'arming periods' within the Ubox app. During these periods, the camera will actively monitor for motion and send alerts. This allows you to customize surveillance based on your schedule.
Image: Ubox app interface for setting arming times.
6.7 Storage Options
The camera supports two storage methods for recorded video:
- Micro SD Card: Insert a Micro SD card (up to 128GB, not included) into the memory card slot. The camera will record and save videos locally.
- Cloud Storage: An optional cloud storage service is available (subscription required). When motion is detected, videos will be uploaded to the cloud.
Image: Diagram showing Micro SD and SIM card slots.
6.8 Multi-User Sharing
The Ubox app allows you to share camera access with family and friends, enabling multiple users (typically 3-4 simultaneously) to view the live feed and recordings.
Image: Multi-user sharing across different locations.
7. Maintenance
- Cleaning: Regularly clean the camera lens and solar panel with a soft, damp cloth to ensure optimal performance and charging efficiency. Avoid abrasive cleaners.
- Waterproofing: The camera is IP66 waterproof. Ensure all covers (e.g., for card slots, charging port) are securely closed and in the correct position to maintain its waterproof integrity.
- Battery Care: While the camera has a built-in battery, prolonged periods without sufficient sunlight may deplete it. Ensure the solar panel is positioned for maximum sun exposure.
Image: Camera demonstrating IP66 waterproof rating.
8. Troubleshooting (FAQ)
- Q: Does this solar camera include a battery?
- A: Yes, the security camera has a built-in 10000mAh battery. All camera options include the battery.
- Q: What app does this camera use?
- A: It uses the Ubox app. You can download it by scanning the QR code in the user manual or from your device's app store.
- Q: What is the difference between the 4G and WiFi camera versions?
- A: The 4G camera version only supports 4G SIM card connection and cannot connect to WiFi. The WiFi camera version only supports 2.4GHz WiFi connection and cannot use a 4G SIM card.
- Q: Why are there no blue lights when I try the 4G connection?
- A: Please ensure your 4G SIM card is active, has a data plan, and does not have a PIN password enabled. Also, verify that the SIM card's band frequency is compatible with the camera. If issues persist, contact technical support.
- Q: What should I do when I first receive the solar camera?
- A: Open the power on button and charge the camera's battery for approximately 10 hours before initial use.
9. User Tips
- Optimal Solar Charging: Position the solar panel in an area that receives direct sunlight for most of the day to ensure consistent battery charging.
- SIM Card Check: For 4G versions, always check that your SIM card is activated and has no PIN lock before inserting it into the camera.
- Secure Sealing: After inserting the SD card or SIM card, ensure all rubber covers and seals are properly closed to maintain the camera's IP66 waterproof rating.
- App Notifications: Enable push notifications for the Ubox app on your phone to receive immediate alerts for motion detection.
- Night Vision Selection: Experiment with both infrared and color night vision modes in different lighting conditions to determine which provides the best clarity for your specific environment.
10. Specifications
| Feature | Specification |
|---|---|
| Brand Name | LS VISION |
| Model Number | LS-WS10M |
| Power Supply | Solar Powered (Built-in 10000mAh Battery) |
| Connectivity | WiFi (2.4GHz, IEEE 802.11 b/g/n) or 4G (SIM card) |
| Sensor | CMOS, 1/2.7" |
| Lens (mm) | 3.6mm |
| Pan/Tilt Range | Pan 240°, Tilt 100° |
| Supported Mobile Systems | iOS, Android (Ubox App) |
| Alarm Action | FTP Photo, Local Alarm, Message Push |
| Technology | Infrared, Pan / Tilt / Zoom |
| Installation | Side, Ceiling, Normal, Outdoor |
| Minimum Illumination | 0.01LUX |
| Special Features | Waterproof / Weatherproof (IP66) |
| IR Distance | 30 meters |
| Video Compression Format | H.264/H.265 |
| TF Card Support | Up to 128G (not included) |
| Solar Panel Power | 6 Watt (with 3m extension cord) |
| APP | Ubox |
11. Warranty and Support
Your LS VISION Solar Powered PTZ Security Camera comes with a 1-year warranty from the date of purchase.
Image: 1 Year Warranty and 7/24 Technical Support.
For any technical assistance, questions, or warranty claims, please contact our customer support team. We provide 7/24 technical support service to ensure your satisfaction.
