FSTE H6C-2

Contents

FSTE-H6C-2 E-Bike Bluetooth LCD Display Meter User Manual

For Electric Bikes and Scooters

1. Introduction

Thank you for choosing the FSTE-H6C-2 E-Bike Bluetooth LCD Display Meter. This display is designed to provide essential information and control functions for your electric bicycle or scooter, enhancing your riding experience. It features a clear LCD screen, various operational functions, and Bluetooth connectivity for smartphone integration. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.

2. Safety Information

  • Always ensure the power to your e-bike/scooter is off before installing or disconnecting the display.
  • Do not attempt to open or modify the display unit. Unauthorized modifications can lead to damage and void the warranty.
  • Keep the display away from extreme temperatures, direct sunlight for prolonged periods, and corrosive substances.
  • Although the display has an IP67 waterproof rating, avoid submerging it in water.
  • Ensure all connections are secure and properly insulated to prevent short circuits.
  • Mount the display securely on the handlebar to prevent it from falling during rides.

3. Package Contents

The package should contain the following items:

  • 1 x FSTE-H6C-2 LCD Display Meter

4. Specifications

FeatureDescription
ModelH6C-2
FunctionsBattery indicator, Headlight control, Boost function, Power gear, Speed display, Subtotal mileage, Total mileage, Running time, Metric-imperial conversion, Fault prompt
Communication ProtocolUART
Applicable Holder Size22.2mm / 25.4mm / 28.6mm / 31.8mm
Voltage Compatibility24V / 36V / 48V / 60V
USB Charging Output5V / 500mA
Waterproof GradeIP67
ConnectivityBluetooth (supports mobile phone connection)
Connector Type5PIN / 6PIN (Male)
ColorBlack
MaterialPlastic
Dimensions71.3mm x 116.1mm x 22.8mm

5. Installation

5.1 Mounting the Display

  1. Choose a suitable position on your e-bike or scooter handlebar. The display holder is compatible with handlebar diameters of 22.2mm, 25.4mm, 28.6mm, and 31.8mm.
  2. Securely attach the display holder to the handlebar using the provided screws. Ensure it is tight and does not rotate freely.
  3. Slide the FSTE-H6C-2 display meter into the holder until it clicks into place.
FSTE-H6C-2 Display Meter mounted on an e-bike handlebar
Figure 1: FSTE-H6C-2 Display Meter mounted on an e-bike handlebar.

5.2 Wiring Connections

The FSTE-H6C-2 display meter uses either a 5PIN or 6PIN male waterproof connector. Ensure your e-bike controller has a compatible female connector. Refer to the wiring diagram below for pin assignments.

Detailed wiring diagram for the 6PIN male connector of the FSTE-H6C-2 display
Figure 2: Wiring Diagram for 6PIN Male Connector.
Pin ColorFunction
Red (D+)Positive Power Supply
Blue (K)Controller Communication (K-line)
White (Light)Headlight Control Output
Black (GND)Ground
Green (RX)Data Receive (from controller)
Yellow (TX)Data Transmit (to controller)

Connect the display's male connector to the corresponding female connector on your e-bike's wiring harness. Ensure the connection is firm and the waterproof seals are properly engaged.

6. Operation

6.1 Basic Functions

  • Power On/Off: Typically, a long press of the power button (usually integrated into the control pad) will turn the display on or off.
  • Battery Indicator: The display shows the current battery level, often with a graphic bar (E to F) and sometimes a percentage.
  • Speed Display: Shows current riding speed in KM/H or MPH.
  • Power Gear (PAS Level): Indicates the current pedal-assist level (e.g., 1-5 PAS). Use the '+' and '-' buttons on the control pad to adjust the assist level.
  • Headlight Control: A short press of the headlight button (if available) or a specific button combination can turn the e-bike's headlights on or off.
  • Boost Function: Activates a temporary power boost. Consult your e-bike's controller manual for specific activation methods.
FSTE-H6C-2 Display Meter showing speed and PAS level
Figure 3: Display showing speed (50 KM/H) and PAS level (5).

6.2 Displayed Information

  • Subtotal Mileage (TRIP): Distance covered during the current ride. This can usually be reset.
  • Total Mileage (ODO): Total distance covered by the e-bike/scooter. This value is typically non-resettable.
  • Running Time: Duration of the current ride.
  • Fault Prompt: Displays error codes or warnings if the system detects an issue. Refer to the troubleshooting section or your e-bike's controller manual for fault code interpretations.

7. Bluetooth Connectivity

The FSTE-H6C-2 display meter supports Bluetooth connectivity, allowing you to connect it to a compatible mobile phone application for extended features and data monitoring.

  1. Ensure Bluetooth is enabled on your smartphone.
  2. Download and install the official companion app for your e-bike system (if available) or a generic e-bike display app that supports UART communication and Bluetooth pairing.
  3. Power on your e-bike and the display meter.
  4. Open the app on your smartphone and follow the in-app instructions to search for and pair with the H6C-2 display. The display icon on the screen will typically indicate a successful connection.
FSTE-H6C-2 Display Meter with smartphone app, highlighting Bluetooth connectivity
Figure 4: Display connected to a smartphone via Bluetooth.

Through the app, you may be able to access additional settings, view detailed ride statistics, or perform diagnostics.

8. Settings

8.1 Metric-Imperial Conversion

The display supports switching between metric (KM/H, KM) and imperial (MPH, Miles) units. The method to change this setting typically involves entering a settings menu:

  1. With the display powered on, long-press a specific button combination (e.g., '+' and '-' simultaneously, or the power button and '+' button) to enter the settings menu.
  2. Navigate through the menu options using the '+' or '-' buttons until you find the unit setting.
  3. Select your desired unit (KM/H or MPH) and confirm the selection.
  4. Exit the settings menu, usually by long-pressing the power button or a specific combination.

Specific button combinations and menu structures may vary slightly. If you encounter difficulties, refer to your e-bike's main controller manual or contact customer support.

9. Troubleshooting

ProblemPossible CauseSolution
Display does not power onNo power from battery; Loose connection; Faulty display/controllerCheck battery charge; Verify all wiring connections are secure; Test with another display/controller if possible; Contact support.
Incorrect speed/mileage readingsIncorrect wheel diameter setting; Faulty speed sensorCheck and adjust wheel diameter in settings (if accessible); Inspect speed sensor and magnet for damage or misalignment.
Bluetooth connection failsBluetooth off on phone; App issues; InterferenceEnsure phone Bluetooth is on; Restart phone and display; Try pairing in a different location; Reinstall app.
Error code displayedSystem fault (motor, controller, sensor)Note the error code and consult your e-bike's controller manual or contact the e-bike manufacturer for specific diagnostics.

10. Maintenance

  • Cleaning: Wipe the display screen and body with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion.
  • Storage: When not in use for extended periods, store the e-bike and display in a dry, temperate environment.
  • Software Updates: If available through the companion app, keep the display's firmware updated for optimal performance and new features.

11. User Tips

  • Always ensure the display is securely mounted to prevent vibration damage during rides.
  • Familiarize yourself with the button layout and functions before riding to avoid distractions.
  • If you experience inconsistent readings, double-check the wheel circumference setting in your controller or display settings.
  • Utilize the Bluetooth connectivity to monitor your ride data and potentially customize settings via the mobile app.

12. Warranty and Support

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Please retain your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.