ANDELI TIG-250PLS

Contents

ANDELI TIG-250PLS AC/DC TIG Welding Machine User Manual

Model: TIG-250PLS

1. Introduction

The ANDELI TIG-250PLS is a state-of-the-art AC/DC TIG welding machine designed for precision welding across a variety of metals. It features advanced functions such as Cold Spot welding, Pulse TIG, and High-Frequency (HF) TIG, making it suitable for both thin and thick materials like aluminum, stainless steel, and carbon steel. This manual provides essential information for the safe and effective operation, setup, and maintenance of your welding machine.

Video: Overview of the ANDELI TIG-250PLS welding machine features and capabilities.

2. Safety Information

WARNING: Welding can be dangerous. Always follow safety precautions to prevent injury or death.

  • Always wear appropriate personal protective equipment (PPE), including a welding helmet with proper shade, flame-resistant clothing, welding gloves, and safety shoes.
  • Ensure adequate ventilation to avoid inhaling welding fumes.
  • Protect bystanders from arc rays and hot metal.
  • Never weld near flammable materials.
  • Ensure the machine is properly grounded.
  • Do not touch live electrical parts.
  • Disconnect power before performing any maintenance or changing accessories.
  • Read and understand all instructions before operating the machine.

3. Package Contents

Upon receiving your ANDELI TIG-250PLS, please verify that all components are present and undamaged:

  • TIG-250PLS AC/DC Welding Machine (110V/220V compatible)
  • Grounding Clamp (2m)
  • WP-26 Aluminum Torch (4m)
  • Nozzles (10 pcs)
  • Collets (10 pcs)
  • Hose Clamps (2 pcs)
  • Tungsten Poles (10 pcs)
  • Foot Switch (2 pcs)
  • American Standard Power Plug
  • Power Conversion Line (for 220V to 110V voltage conversion)
ANDELI TIG-250PLS welding machine and included accessories

Image: The TIG-250PLS welding machine with all standard accessories.

4. Product Overview

4.1 Front Panel

Front panel of ANDELI TIG-250PLS with labeled components

Image: Front panel layout showing the screen, function buttons, adjustment knob, and connectors.

  • Screen: Digital display for current settings and parameters.
  • Function Buttons: Select welding modes (AC/DC, 2T/4T, Cold, Save, Pulse).
  • Adjustment Knob: Used to fine-tune welding parameters.
  • Remote Control Port: For connecting a foot pedal or other remote control devices.
  • Negative Pole: Connection for the workpiece clamp in DC welding.
  • Positive Pole: Connection for the TIG torch in DC welding.
  • Gas-power Connector: Connects the TIG torch for gas and power supply.
  • Two-core Connector: Additional connection point, likely for specific torch types or functions.

4.2 Rear Panel

Rear panel of ANDELI TIG-250PLS with labeled components

Image: Rear panel layout showing the gas inlet, power switch, and power cable.

  • Gas Tube Connector: Inlet for inert shielding gas (e.g., Argon).
  • ON/OFF Switch: Main power switch for the machine.
  • Power Cable: Connects the machine to the power supply (110V/220V).

4.3 Control Panel Diagram

Detailed diagram of the TIG-250PLS control panel with parameter adjustment areas

Image: Detailed control panel diagram illustrating various settings and their functions.

  • AC: Alternating Current mode, typically used for aluminum welding.
  • DC: Direct Current mode, typically used for stainless steel, carbon steel, and other metals.
  • 2T (Manual Mode): Two-touch trigger operation. Press and hold to weld, release to stop.
  • 4T (Semi-automatic Mode): Four-touch trigger operation. Press to start, release to continue welding, press again to stop.
  • Cold: Low-temperature welding mode, designed to minimize deformation and discoloration.
  • Save: Allows saving custom welding parameters for quick recall.
  • Pulse: Pulse continuous welding function, providing better control over heat input.
  • Parameter Adjustment Area: Includes settings for Pre-Flow, Start Current, Rise Time, Peak Current, Pulse Width, Base Current, Frequency, Clean PW (AC Balance), Crater Current, Post-Flow, and Time.

5. Specifications

The following table details the technical specifications for the ANDELI TIG-250PLS welding machine:

Table of technical specifications for TIG-250PL ACDC welder

Image: Detailed technical specifications table.

FunctionTIGPULSECOLD
ACDCACDCACDC
Power Supply (V)220V±10%
Frequency (Hz)50Hz
No-Load Voltage (V)64
Rated Input Power (KW)8.1
Rated Input Current (A) I1max37
Effective Input Current (A) I1eff20
Welding Current Range (A)10-20010-20010-200
Power Factor0.76
Efficiency (%)60%
Load Voltage (V)10.4-18
Pre-Flow Time (S)0.1-1
Post-Flow Time (S)1-10
Duty Cycle @40°C25%200A/18V
60%129A/15.2V
100%100A/4V
Arc-starting Current (A)10-200BY SET
Slow Rise Time (S)0-5
Pulse Frequency (Hz)//0.5-100//
Pulse Width Range (%) duty ratio//5-100//
AC Clean Width (AC Balance)20-50
AC Frequency40-100
Base Current (A)10-200
Current Decay Time (S)0-5
Crater Current (A)10-200
Welding Thickness0.8-50.4-1
Protection ClassIP21S
Insulation ClassH
CoolingAIR

Weight: 12.6 KG

6. Setup

6.1 Power Connection

  • Ensure the ON/OFF switch on the rear panel is in the "OFF" position.
  • Connect the power cable to the machine and then to a suitable 110V or 220V power outlet.
  • If converting from 220V to 110V, use the provided power conversion line.
  • The machine is designed for dual voltage operation (110V/220V).

6.2 Gas Connection

  • Connect your inert shielding gas supply (e.g., pure Argon) to the Gas Tube Connector on the rear panel.
  • Ensure all connections are secure to prevent gas leaks.

6.3 Torch and Ground Clamp Connection

  • Connect the WP-26 Aluminum Torch to the Gas-power Connector on the front panel.
  • Connect the Grounding Clamp to the Negative Pole on the front panel.
  • Attach the grounding clamp securely to the workpiece.
  • If using a foot switch, connect it to the Remote Control Port.

7. Operating Instructions

The TIG-250PLS offers multiple welding modes and functions. Familiarize yourself with the control panel (refer to Section 4.3) before operation.

7.1 Basic Operation Steps

  1. Turn on the machine using the ON/OFF switch.
  2. Select the desired welding mode (AC or DC) using the corresponding buttons.
  3. Choose between 2T (Manual) or 4T (Semi-automatic) trigger mode.
  4. Select additional functions like Cold or Pulse if required.
  5. Adjust welding parameters (Current, Frequency, Pulse Width, etc.) using the adjustment knob and navigation buttons.
  6. Begin welding, ensuring proper safety measures are in place.

7.2 Welding Modes and Applications

7.2.1 AC Cold Spot Welding

Ideal for thin aluminum welding, minimizing heat input and distortion.

Example of AC Cold Spot welding on 0.5mm aluminum plate

Image: AC Cold welding on a 0.5mm aluminum plate, showing minimal heat affected zone.

7.2.2 AC TIG Welding (Argon Arc Pulse)

Used for quick welding of aluminum plates, providing strong and clean welds.

Example of AC TIG welding on 3mm aluminum plate

Image: AC TIG welding on a 3mm aluminum plate.

7.2.3 DC Cold Spot Welding

Suitable for sheet metal welding without discoloration or the need for sanding. Produces silver-white welds on stainless steel.

Example of DC Cold welding on 0.8mm stainless steel plate

Image: DC Cold welding on a 0.8mm stainless steel plate, showing a clean, silver-white weld.

7.2.4 DC Cold Welding Interval

Allows for rapid, continuous spot welding on sheet metal, maintaining low heat input.

(No specific image for this, but it's a variation of DC Cold Spot)

7.2.5 DC TIG Spot Welding

Designed for welding thicker plates, providing strong and precise spot welds.

Example of DC TIG welding on 3mm stainless steel plate

Image: DC TIG welding on a 3mm stainless steel plate.

7.2.6 DC Argon Arc Pulse

Enables fast welding of thick plates with controlled heat input due to the pulse function.

Example of DC Pulse welding on 0.8mm stainless steel plate

Image: DC Pulse welding on a 0.8mm stainless steel plate.

7.3 Memory Function (Mode 1)

The machine features a simplified intelligent welding memory function to store and recall parameters:

Diagram of the memory function on the TIG-250PLS control panel

Image: Memory function display, showing storage parameters (F0-F5) and built-in parameters (F6-F9) for different plate thicknesses.

  1. Step 1: Call Parameters (F0-F5): Use the 'Save' button and navigation to access and recall previously saved custom parameters.
  2. Step 2: Select Plate Thickness Specifications (F6-F9): The machine has built-in parameters optimized for various plate thicknesses (e.g., L 1.0, L 2.0, L 3.0, L 5.0). Select the appropriate setting for your material.

8. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine.

  • Cleaning: Periodically clean the machine's exterior with a dry, soft cloth. Ensure ventilation grilles are free from dust and debris.
  • Internal Cleaning: For internal cleaning, consult a qualified technician. Compressed air can be used to blow out dust, but ensure the machine is disconnected from power and proper safety gear is worn.
  • Cable Inspection: Regularly inspect all cables (power, torch, ground) for cuts, fraying, or damage. Replace damaged cables immediately.
  • Torch Maintenance: Clean the torch nozzle and collet regularly. Replace worn-out nozzles, collets, and tungsten electrodes as needed.
  • Gas System: Check gas hoses and connections for leaks. Ensure the gas regulator is functioning correctly.
  • Storage: Store the machine in a clean, dry environment, away from excessive dust, moisture, and corrosive materials.

9. Troubleshooting

This section addresses common issues you might encounter. For problems not listed here, contact customer support.

ProblemPossible CauseSolution
Machine does not power onNo power supply; ON/OFF switch is off; Faulty power cable.Check power outlet and circuit breaker; Ensure switch is ON; Inspect and replace power cable if damaged.
No arc initiationPoor ground connection; Incorrect tungsten electrode; Gas flow issue; Incorrect settings.Ensure ground clamp is securely attached to clean metal; Use correct tungsten type and size; Check gas supply and flow rate; Verify welding parameters.
Poor weld quality (e.g., porosity, discoloration)Insufficient shielding gas; Contaminated workpiece; Incorrect welding parameters; Worn torch consumables.Check gas flow and ensure pure argon is used; Clean workpiece thoroughly; Adjust current, frequency, or pulse settings; Replace nozzle, collet, or tungsten.
Overheating/Thermal overloadExceeding duty cycle; Blocked ventilation.Allow machine to cool down; Ensure proper ventilation and clear any obstructions from air vents.

10. User Tips

  • For optimal "Cold Welding" results on aluminum and stainless steel, always use pure argon gas. This helps achieve the desired silver-white weld color and minimizes discoloration.
  • Experiment with the "Pulse" function for better control over heat input, especially when welding thinner materials or when precise bead appearance is desired.
  • Utilize the "Save" function to store your frequently used welding parameters for different materials and thicknesses. This saves time and ensures consistent results.
  • When welding aluminum, ensure the AC Clean Width (AC Balance) is correctly set to effectively break up the aluminum oxide layer.
  • The portable design makes it easy to move the machine. Always use the handle for transport.

11. Warranty and Support

The ANDELI TIG-250PLS welding machine comes with a two-year warranty and free replacement parts. For any issues or technical assistance, please contact the seller's customer service team. They can provide free guidance and support.

For more detailed information or specific inquiries, please refer to the official product page or contact the manufacturer directly.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.