1. Introduction
The Hwato SDZ-III Electro Acupuncture Nerve & Muscle Stimulator is a device designed for electroacupuncture therapy and physical muscle stimulation. It provides various output modes and adjustable intensity levels to facilitate nerve and muscle stimulation. This manual provides essential information for the safe and effective use of your device.
Video: Product Introduction for the Hwato SDZ-III Electro Acupuncture Device.
2. Package Contents
Before starting, please verify that all items are present in the package:
- Hwato SDZ-III Electro Acupuncture Nerve & Muscle Stimulator Unit
- Power Adapter (C9V)
- Electrode Wires (Output Lines)
- Metal Clips (6 pairs)
- Adhesive Electrode Pads
- Accessory Box
Image: Overview of the Hwato SDZ-III device and its included accessories.
3. Setup Instructions
- Unpack the Device: Carefully remove the SDZ-III unit and all accessories from the packaging.
- Connect Power: Plug the C9V power adapter into the power input port on the device, then connect the adapter to a suitable power outlet (220V ± 22V).
- Attach Electrode Wires: Connect the output lines (electrode wires) to the desired output ports (1-6) on the front of the device.
- Prepare Electrodes: Attach the metal clips to the ends of the electrode wires. Connect the adhesive electrode pads to the metal clips, or attach acupuncture needles if using for electroacupuncture.
- Placement: Ensure the device is placed on a stable, flat surface away from moisture and direct sunlight.
Image: Close-up of the six output ports for connecting electrode wires.
4. Operating Instructions
4.1 Power On/Off
Turn the intensity adjustment knobs (1-6) clockwise to the 'on' position to power on the respective output channels. Turn them counter-clockwise to 'off' to power off.
4.2 Function Selection
Use the 'Function/Choose Switch' rotary knob to select the desired treatment mode or function. Push the knob to confirm selection.
Image: Detail of the Function/Choose Switch.
4.3 Intensity Adjustment
Each output channel (1-6) has an independent intensity adjustment knob. Rotate the knob clockwise to increase the stimulation intensity and counter-clockwise to decrease it. Start with a low intensity and gradually increase until a comfortable and effective sensation is achieved.
Image: Detail of the Intensity Adjustment Knobs.
4.4 Monitoring Display
The large LCD screen displays relevant information such as selected function, intensity levels, and possibly time (if the model supports time display). Monitor the display during operation.
Image: The large LCD screen for monitoring device status.
4.5 Working Principle Diagram
The device operates by converting electrical power into controlled pulse signals. These signals are then delivered through the output channels to stimulate nerves and muscles.
Image: Block diagram illustrating the internal working principle of the device.
5. Maintenance
- Cleaning: Wipe the device exterior with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
- Electrode Care: Clean electrode pads after each use according to their specific instructions. Replace pads when they lose their adhesiveness.
- Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case when not in use.
- Cable Inspection: Regularly inspect all cables and wires for any signs of damage. Do not use if cables are frayed or damaged.
6. Troubleshooting
- No Power: Ensure the power adapter is securely connected to both the device and a working power outlet. Check if the outlet is functional.
- No Stimulation: Verify that the intensity knobs are turned to an 'on' position and adjusted to a sufficient level. Check that electrode wires are properly connected to both the device and the electrodes/pads, and that the electrodes are correctly placed on the skin.
- Irregular Output: Ensure all connections are secure. If the issue persists, discontinue use and contact support.
- Display Issues: If the screen is blank or shows incorrect information, try restarting the device by disconnecting and reconnecting the power.
7. Specifications
Image: Product Information Table.
| Parameter | Specification |
|---|---|
| Product Name | Hwato Electronic Acupuncture Device |
| Product Model | SDZ-III |
| Power Voltage | 220V ± 22V |
| Input Power | ≤ 13VA |
| Output Ports | 6-way output |
| Output Waveform | Bidirectional asymmetric pulse |
| Frequency | ≤ 400Hz |
| Operating Temperature | 10°C - 40°C |
| Operating Humidity | 30% - 75% |
8. User Tips
- Always consult with a healthcare professional before using electroacupuncture or muscle stimulation devices, especially if you have pre-existing medical conditions.
- Ensure skin is clean and dry before applying electrode pads for optimal conductivity and adhesion.
- Start with the lowest intensity setting and gradually increase to find a comfortable and effective level. Avoid excessively high intensity that causes discomfort.
- Do not use the device on broken skin, open wounds, or sensitive areas like the eyes or heart region.
- Keep the device and accessories out of reach of children.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.