Vtopek 10.26-inch ADAS 4K Dash Cam User Manual

1. Product Overview

The Vtopek 10.26-inch ADAS 4K Dash Cam is a versatile in-car device designed to enhance your driving experience with advanced features. It combines a high-resolution 4K DVR with a 360° rotatable front camera, wireless CarPlay and Android Auto compatibility, and a large IPS HD touch screen for intuitive control and clear display. This manual will guide you through the installation, operation, and maintenance of your new dash cam.

2. Safety Information

• Always install the device in a location that does not obstruct your view of the road or interfere with the operation of your vehicle's safety features.
• Ensure all cables are securely routed and do not interfere with driving controls (pedals, steering wheel).
• Do not operate the device or adjust settings while driving. Always pull over to a safe location before making any adjustments.
• Avoid exposing the device to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
• Use only the provided power adapter and cables to prevent damage to the device and your vehicle.
• Keep the device away from children and pets.

3. Package Contents

Please check the package for the following items. Note that some items may be optional depending on your purchased kit.

• Main Unit (10.26-inch Dash Cam)
• Car Charger
• Power Box (Optional)
• AUX Cable
• Rear Camera (Optional)
• 6m Cable (for rear camera, if included)
• TF Card (Optional)
• GPS Module (Optional)
• User Manual (PDF available online: User manual (PDF))

4. Setup and Installation

4.1 Bracket Installation

The dash cam can be installed using the provided bracket. Ensure the mounting location does not obstruct your view or interfere with airbags.

1. Attach the bracket to the dash cam unit. The 360° rotating lens allows for flexible positioning.
2. Clean the dashboard surface where you intend to mount the device.
3. Remove the protective film from the adhesive pad on the bracket.
4. Firmly press the bracket onto the dashboard, ensuring a secure attachment.

4.2 Power Connection

Connect the provided car charger to the dash cam's power input and then to your vehicle's 12V-32V power outlet.

4.3 Rear Camera Installation (Optional)

If your kit includes a rear camera, connect it to the main unit using the 6m cable. For the reversing assist function, connect the red signal wire of the rear camera to your car's reversing light. If you do not need this function, leave the red signal wire unconnected.

4.4 GPS Module Installation (Optional)

If your kit includes a GPS module, connect it to the designated port on the main unit. Ensure the GPS antenna has a clear view of the sky for optimal signal reception.

4.5 TF Card Insertion

Insert a compatible TF (microSD) card (Class 10, up to 256GB recommended) into the TF card slot on the side of the device. Ensure it is inserted correctly until it clicks into place.

5. Operating Instructions

5.1 Basic Operation

The device features a 10.26-inch IPS HD touch screen. Power on the device by connecting it to the car charger. The main interface will display various functions such as CarPlay, Android Auto, Files, Settings, and Dash Cam.

5.2 Wireless CarPlay / Android Auto

This feature allows you to connect your smartphone wirelessly to the dash cam for access to navigation, music, calls, and more. It supports iOS 7 and above, and Android 11 and above (Google 8 version).

1. Enable Wi-Fi and Bluetooth on your smartphone.
2. On the dash cam, select the CarPlay or Android Auto icon.
3. The device will automatically search for your phone. Select your phone from the list to connect.
4. Once connected, you can access your phone's apps directly on the dash cam screen.

5.3 Mirror Link / Airplay (Super Link)

The device supports Miracast/Airplay technology, allowing you to mirror your smartphone's screen directly to the dash cam without needing to download an app. This is compatible with both Android and iPhone.

1. On the dash cam, switch to 'Super Link' mode.
2. For Android: Ensure your phone's Miracast/Screen Mirroring feature is enabled.
3. For iPhone: Ensure your phone's Airplay feature is enabled.
4. The dash cam will appear as a device to connect to. Select it from your phone.
5. Once connected, your phone's screen will be mirrored on the dash cam.

5.4 ADAS Auxiliary Warning

The Advanced Driver-Assistance System (ADAS) uses dynamic video algorithms to provide lane deviation warnings, front vehicle collision warnings, front vehicle start alerts, and vehicle distance displays while driving.

5.5 Recording Functions

The dash cam supports various recording modes:

• Loop Recording: New footage automatically overwrites older footage when the memory card is full, ensuring continuous recording. Locked emergency videos are retained.
• Emergency Recording: In case of sudden braking or collision (detected by the G-Sensor), the device automatically records and locks the incident video, preventing it from being overwritten.
• 24h Parking Monitoring (Optional): Requires an ACC Hardware Kit (sold separately). This feature allows the dash cam to monitor your vehicle even when parked.

5.6 Audio Output

The dash cam offers multiple audio output options:

• SPK (Built-in Speaker): The device's internal speaker.
• FM Transmitter: Transmits audio to your car's FM radio. Tune your car radio to the same frequency set on the dash cam.
• AUX: Connects directly to your car's AUX input using the provided AUX cable.
• Bluetooth (BT): Pair your phone to your car's Bluetooth system for audio output from CarPlay/Android Auto.

5.7 Voice Assistant & Navigation

Utilize voice commands for safer driving. When connected via CarPlay or Android Auto, you can use Siri or Google Assistant for navigation, calls, and music control.

5.8 Adjustable & 360° Rotating Front Camera

The front camera can be adjusted up and down, and rotated 360 degrees from side to side. This allows for multiple uses, such as recording the road ahead, monitoring the car's side windows, or acting as an in-car camera for monitoring passengers.

5.9 Driving Habit Selection

The device supports switching between left-hand and right-hand driving modes to adapt to different regional traffic rules.

6. Maintenance and Care

• Cleaning: Use a soft, dry cloth to clean the screen and device body. Avoid using abrasive cleaners or solvents.
• SD Card: Regularly format your TF card (at least once a month) to ensure optimal performance and prevent data corruption. Back up any important recordings before formatting.
• Software Updates: Periodically check for firmware updates to ensure your device has the latest features and bug fixes. Updates can typically be found in the device settings under "Software Upgrade" (refer to OCR text for detailed steps).
• Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight.

7. Troubleshooting (FAQ)

Q: What phone versions does CarPlay/Android Auto support?

A: iPhone: iOS 10 or higher version; Android phone: Android 11 or higher version. Not compatible with Huawei phones.

Q: How to use the latest version of Bluetooth audio output?

A: First, click on the audio output icon and select BT or CarPlay audio output mode. Then, use a phone connected to CarPlay/Android Auto to connect to the vehicle's Bluetooth for sound synchronization.

Q: Why is there no sound on the CarPlay screen?

A: There are four audio output modes: SPK (device built-in speaker), FM transmitter, AUX, and BT. The device will only emit sound when SPK mode is selected. If FM/AUX/BT is selected, the device will not make any sound as the audio is routed to your car's system.

Q: What is the function of the GPS module?

A: After inserting the GPS module and successfully connecting to satellites, the DVR will display the speed. When playing videos through the built-in playback software on the memory card on a computer, it will display speed, coordinates, and a map.

Q: Why does the CarPlay machine keep restarting automatically?

A: The main reasons for automatic restart are:
1. Memory card issue: Try replacing the memory card. It is recommended to use a professional memory card.
2. Power issue: Use only the professional car charger provided. Do not use phone power cords or other power cords.

Q: Can I use the original car/other brand's rear camera?

A: No. Only the accompanying cameras are supported. It is recommended to purchase an option that includes a camera.

Q: Does it have an Android system? Can I use YouTube?

A: It does not have a full Android operating system. Therefore, you cannot directly install apps like YouTube or download other applications.

Q: Why is there noise in the AUX/FM output sound?

A: A few car models may experience AUX/FM noise issues due to signal interference or compatibility problems. It is recommended to use the Bluetooth audio output for better sound quality.

8. Specifications

9. User Tips

• For optimal audio quality, especially if experiencing noise with FM/AUX, prioritize using the Bluetooth audio output to your car's speaker system.
• To ensure continuous recording and prevent issues, regularly format your TF card.
• If you plan to use the parking monitoring feature, remember to purchase and install the ACC Hardware Kit separately.
• When using the GPS module, ensure it has a clear line of sight to the sky for accurate speed and location data.
• For the reversing assist function, correctly connect the rear camera's red signal wire to your car's reversing light.

10. Warranty and Support

This product comes with a one-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

For technical support, troubleshooting assistance, or warranty claims, please contact JMCQ customer service. You can reach them via their store page on AliExpress: JMCQ Store. They aim to reply within 12 hours.