AIFEN 3006

Contents

AIFEN 3006 30V 6A 180W DC Power Supply

Adjustable Laboratory Power Supply for Electron Repair

1. Introduction

This manual provides essential information for the safe and effective operation of your AIFEN 3006 DC Power Supply. The AIFEN 3006 is a high-precision, adjustable laboratory power supply designed for various applications, including electron repair, research, and development. It features stable output, low ripple, and multiple protection modes to ensure safety and reliability.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in electric shock, fire, or damage to the product.

  • Always ensure the correct input voltage (110V/220V) is selected on the rear panel before connecting the power supply to the mains.
  • Do not operate the device in wet or damp conditions.
  • Ensure adequate ventilation around the unit to prevent overheating.
  • Do not open the casing of the power supply; there are no user-serviceable parts inside.
  • Use only the provided power cord and output cables.
  • Disconnect the power supply from the mains before performing any maintenance or when not in use for extended periods.
  • Keep children and unauthorized personnel away from the device during operation.
AIFEN 3006 DC Power Supply highlighting safety features
Figure 2.1: Safety and Precision Features of AIFEN 3006

The AIFEN 3006 is designed with safety in mind, featuring two protection modes and ultra-low ripple for stable and safe operation. It includes a 'Short Killer' function for enhanced short-circuit protection.

3. Package Contents

Please check the package for the following items:

  • AIFEN 3006 DC Power Supply Unit
  • Power Cord (appropriate for your region)
  • Red and Black Output Cables (with banana plugs and alligator clips)
  • User Manual
Contents of the AIFEN 3006 package
Figure 3.1: AIFEN 3006 Package Contents

4. Product Overview

4.1 Front Panel

Front panel layout of AIFEN 3006 DC Power Supply with labeled controls and displays
Figure 4.1: Front Panel Controls and Displays
  1. Voltage Display (V): Shows the current output voltage.
  2. Current Display (A): Shows the current output current.
  3. Power Display (W): Shows the current output power.
  4. CONT.OCP C.V/C.C Indicator: Indicates Continuous Overcurrent Protection, Constant Voltage, or Constant Current mode.
  5. OCP Button: Toggles Overcurrent Protection mode.
  6. OFF/ON (Output Switch) Button: Controls the output power to the terminals.
  7. Voltage Adjustment Buttons (V): Adjusts the output voltage.
  8. Current Adjustment Buttons (A): Adjusts the output current.
  9. Shift Adjustment Buttons: Used for fine-tuning voltage and current settings.
  10. Power Switch: Turns the main power of the unit ON/OFF.
  11. Power Positive and Negative Output Ports (0V-30V): Main DC output terminals.
  12. 5V2A Fixed USB Output: Provides a fixed 5V, 2A USB power output.

4.2 Rear Panel

Rear panel of AIFEN 3006 DC Power Supply showing fan, power input, and voltage selector
Figure 4.2: Rear Panel Features

The rear panel includes a cooling fan for heat dissipation, the main power input socket, and a voltage selector switch (110V/220V). It also features additional output terminals for enhanced flexibility and safety.

4.3 Key Features

  • Precise Shifting: Current and voltage can be accurately adjusted to three decimal places.
  • Low Ripple: Ensures a clean and stable power output, crucial for sensitive electronics.
  • One-Button Switch: Easily switch between continuous overcurrent protection, constant voltage (CV), and constant current (CC) modes.
  • Output Switch: Flexibly control the circuit on and off without powering down the unit.
  • Fast Adjustment: Quick and responsive current and voltage adjustments.
  • Multiple Protection Modes: Includes Overcurrent Protection (OCP), Constant Voltage (CV), Constant Current (CC), and Short Killer for enhanced safety.
  • Front and Rear Output Terminals: Provides versatile connection options.
AIFEN 3006 features: Low Ripple, Precise Shifting, One-Button Switch, Output Switch, Fast Adjustment
Figure 4.3: Highlighted Features

5. Setup

  1. Unpacking: Carefully remove the power supply and all accessories from the packaging. Inspect for any signs of damage.
  2. Voltage Selection: Locate the 110V/220V selector switch on the rear panel. Ensure it is set to match your local mains voltage. CAUTION: Setting the wrong voltage can severely damage the unit.
  3. Power Connection: Connect the provided power cord to the power input socket on the rear panel, then plug the other end into a grounded AC outlet.
  4. Output Cable Connection: Connect the red (positive) and black (negative) output cables to the corresponding output ports on the front panel (0V-30V). Ensure a secure connection.
  5. Load Connection: Connect the other end of the output cables to your device or circuit (load). Always ensure the load is correctly polarized.

6. Operating Instructions

  1. Power On: Flip the main Power Switch on the front panel to the 'ON' position. The display will illuminate.
  2. Pre-setting Voltage and Current: Before enabling output, use the Voltage Adjustment (V) and Current Adjustment (A) buttons to set your desired output voltage and current limits. Use the Shift Adjustment buttons for fine-tuning. The display will show the set values.
  3. Enabling Output: Once voltage and current are set, press the 'OFF/ON' (Output Switch) button to enable power output to the terminals. The output indicator will light up.
  4. Monitoring Output: The display will show the actual output voltage, current, and power being delivered to the load.
  5. Overcurrent Protection (OCP): Press the 'OCP' button to activate or deactivate the overcurrent protection. When OCP is active, if the output current exceeds the pre-set limit, the power supply will automatically cut off output to protect the connected device.
  6. Constant Voltage (CV) and Constant Current (CC) Modes: The power supply automatically operates in CV or CC mode depending on the load. If the load resistance is high, it operates in CV mode, maintaining the set voltage. If the load resistance is low, it operates in CC mode, maintaining the set current. The 'CONT.OCP C.V/C.C' indicator will show the active mode.
  7. Using the 5V/2A USB Output: The dedicated 5V/2A USB port can be used to charge compatible devices or power small USB-powered circuits. This output is independent of the main adjustable DC output.
  8. Disabling Output: Press the 'OFF/ON' (Output Switch) button again to disable power output to the terminals.
  9. Power Off: Flip the main Power Switch to the 'OFF' position when finished using the power supply.

7. Maintenance

  • Cleaning: Regularly clean the exterior of the power supply with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Ventilation: Ensure the cooling fan and ventilation openings on the rear and sides are free from dust and obstructions. Periodically clean them with compressed air if necessary.
  • Storage: Store the power supply in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
  • Cable Inspection: Periodically inspect the power cord and output cables for any signs of damage, fraying, or loose connections. Replace damaged cables immediately.

8. Troubleshooting

ProblemPossible CauseSolution
No power when switched onPower cord not connected, mains power issue, incorrect voltage selection.Check power cord connection, verify wall outlet, ensure 110V/220V switch is correct.
No output voltage/currentOutput switch is OFF, OCP tripped, output cables not connected correctly, load issue.Press 'OFF/ON' button to enable output, check OCP status, verify cable connections to load, check load for short circuit.
Output voltage/current unstablePoor load connection, faulty load, internal issue.Check all connections, test with a different load. If problem persists, contact support.
Unit overheatsBlocked ventilation, prolonged high load operation.Ensure clear ventilation paths, reduce load or operating time, allow unit to cool.

9. Specifications

ParameterValue
Model NumberAIFEN 3006
Input VoltageAC 110V/220V (Switchable)
Output Voltage0-30V DC
Output Current0-6A
Output Power180W
Current TypeDC
Voltage/Current Adjustment PrecisionThree decimal places
USB Output5V/2A (Fixed)
Protection FeaturesOCP (Overcurrent Protection), CV (Constant Voltage), CC (Constant Current), Short Killer
Ripple and NoiseLow Ripple
CertificationsCE, WEEE
Dimensions (L x W x H)21.5 cm x 11.5 cm x 17 cm
Host Weight1.26 KG
AIFEN 3006 DC Power Supply with dimensions and weight
Figure 9.1: AIFEN 3006 Dimensions and Weight

10. User Tips

  • For sensitive circuits, always start with the output disabled and gradually increase voltage/current after connecting the load.
  • Utilize the OCP function to prevent accidental damage to your circuits, especially when working with unknown loads.
  • The 5V/2A USB output is convenient for powering microcontrollers or charging small devices directly from the power supply.
  • When performing electron repair, ensure proper grounding of your workbench and tools to avoid electrostatic discharge (ESD) damage.

11. Warranty and Support

The AIFEN 3006 DC Power Supply is covered by a manufacturer's warranty against defects in materials and workmanship. For warranty claims, technical support, or service inquiries, please contact your original point of purchase or the manufacturer's authorized service center. Please retain your proof of purchase for warranty validation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.