4DRC V18

Contents

4DRC V18 Mini Drone User Manual

Model: V18 | Brand: 4DRC

1. Introduction

This manual provides detailed instructions for the safe operation and maintenance of your 4DRC V18 Mini Drone. Please read this manual thoroughly before operating the drone to ensure proper use and to prevent damage or injury.

4DRC V18 Mini Drone with remote control and carrying case

Figure 1: 4DRC V18 Mini Drone, Remote Control, and Carrying Case

2. Safety Guidelines

WARNING: Not suitable for children under 36 months due to small parts.

  • Always operate the drone in open areas, away from people, animals, and obstacles.
  • Ensure the drone battery is fully charged and the remote control has fresh batteries before each flight.
  • Do not fly the drone in strong winds or adverse weather conditions.
  • Keep fingers and hair away from rotating propellers.
  • Adult supervision is recommended for users under 14 years of age.
  • Avoid flying near water or moisture.
  • Do not modify or disassemble the drone or remote control.
4DRC V18 Mini Drone with 360 degree propeller protection

Figure 2: The drone features a full perimeter protection design for enhanced safety and durability.

3. Package Contents

Verify that all items are present in your package:

  • 1 x 4DRC V18 Mini Drone
  • 1 x Remote Control
  • 1 x 3.7V Drone Battery (Quantity may vary based on package option)
  • 1 x USB Charging Cable
  • 4 x Spare Propeller Blades
  • 1 x Screwdriver
  • 1 x Operating Instructions Manual
  • 1 x Storage Bag (Optional, depending on package)
Product parts list for the 4DRC V18 Mini Drone, showing drone, battery, fan blades, screwdriver, charging cable, and storage bag.

Figure 3: Included components for the V18 Mini Drone (Orange variant shown).

4. Specifications

FeatureDetail
Model Number4D-V18
MaterialABS plastic and electronic components
Frequency2.4G
Control Channels4 channels
Motor TypeBrush Motor
Drone Battery3.7V Lithium Battery
Charging Voltage3.7V (via USB)
Charging TimeApproximately 40 minutes
Flight TimeApproximately 10-12 minutes
Remote Control Distance60-100 meters
FPV Distance (if applicable)30-50 meters
Transmitter Power3 x AAA Battery (Not Included)
Drone Dimensions10 x 10 x 5 cm
Drone WeightApproximately 22g
Takeoff WeightApproximately 35g
Anti-wind Ability<10km/h
Indoor/Outdoor UseIndoor-Outdoor
Operator Skill LevelBeginner, Intermediate, Expert
Recommended Age14+ years
Product specifications table and drone dimensions diagram

Figure 4: Detailed product specifications and dimensions.

5. Setup Guide

5.1. Charging the Drone Battery

  1. Connect the drone's 3.7V Lithium Battery to the provided USB Charging Cable.
  2. Plug the USB Charging Cable into a suitable USB power source (e.g., computer USB port, USB wall adapter).
  3. The charging indicator light will show the charging status (refer to the manual for specific light behavior).
  4. Charging takes approximately 40 minutes. Do not overcharge the battery.
Diagram showing how to install the modular battery into the drone.

Figure 5: Modular battery installation for quick and easy exchange.

5.2. Installing Remote Control Batteries

  • Open the battery compartment on the back of the remote control.
  • Insert 3 x AAA batteries (not included), ensuring correct polarity.
  • Close the battery compartment securely.

5.3. Pairing the Drone and Remote Control

  1. Place the drone on a flat, level surface.
  2. Turn on the drone's power switch. The LED lights on the drone will flash.
  3. Turn on the remote control.
  4. Push the left joystick (throttle) all the way up, then all the way down. The drone's lights will stop flashing and remain solid, indicating successful pairing.

5.4. Calibration

  • After pairing, perform a one-click calibration by pressing the designated button on the remote control (refer to Figure 6 for button layout). This ensures stable flight.

6. Operating Instructions

Video 1: Demonstration of 4DRC V18 Mini Drone features including one-click takeoff, intelligent height setting, crash-resistant safety, jettisoning mode, modular battery, multiplayer speed switch, 360-degree stunt roll, one-click rotation, keyboard spin, and one-touch landing.

6.1. Remote Control Layout

Diagram of the 4DRC V18 Mini Drone remote control with labeled buttons for speed shift, fine-tuning, 360 roll, one-click rotation/hover, one-click return/headless mode, scram/one-click calibration, and one-click take off/land.

Figure 6: Remote Control Button Functions.

  • Left Joystick (Throttle/Forward/Backward): Controls altitude (up/down) and forward/backward movement.
  • Right Joystick (Left/Right/Side Flight): Controls left/right turning and side flight.
  • Speed Shift Button: Adjusts flight speed (short press).
  • 360° Roll Button: Performs a 360-degree flip (press and hold, then move right joystick in desired direction).
  • One-Click Rotation/Hover Button: Initiates a rotation or hover function.
  • One-Click Return/Headless Mode Button: Short press for headless mode, long press for one-click return.
  • Scram/One-Click Calibration Button: Short press for emergency stop, long press for one-click calibration.
  • One-Click Take Off/Land Button: Initiates automatic takeoff or landing.
  • Fine-tuning Buttons: Adjust trim for stable flight.

6.2. Basic Flight Functions

  • One-Click Takeoff/Landing: After pairing, press the one-click takeoff/land button to automatically lift off or land.
  • Altitude Hold Mode: The drone maintains a stable altitude automatically, making it easier to control.
  • Headless Mode: In this mode, the drone's orientation is relative to the pilot, regardless of the drone's front direction. Press the Headless Mode button to activate/deactivate.
  • 360° Flip: Press and hold the 360° Roll button, then push the right joystick in any direction to perform a flip.
  • One-Click Return: Long press the One-Click Return button to make the drone fly back towards the remote control.
  • Speed Adjustment: Use the Speed Shift button to cycle through different flight speeds (e.g., low, medium, high).
  • Keyboard Spin: Press the designated button (refer to remote diagram) to make the drone spin in place.

6.3. Advanced Operating Modes

  • Gesture Control (Jettisoning Mode): The drone can be launched by hand. After powering on and pairing, gently toss the drone into the air, and it will automatically stabilize.
    Hand-held takeoff using gesture control for the 4DRC V18 Mini Drone.

    Figure 7: Hand-held takeoff (Gesture Control).

  • Night Flight: The drone is equipped with bright LED lights for visibility during night flights.
    4DRC V18 Mini Drone with bright LED lights for night flight.

    Figure 8: Bright LED lights for night visibility.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the drone and remote control. Do not use water or solvents.
  • Propeller Inspection: Regularly check propellers for damage. Replace any bent or broken blades using the provided spare blades and screwdriver.
  • Battery Care:
    • Store batteries in a cool, dry place.
    • Do not expose batteries to extreme temperatures.
    • If the drone will not be used for an extended period, remove batteries from both the drone and remote control.
  • Storage: Store the drone and accessories in a safe place, preferably in its original packaging or a dedicated carrying case, to prevent damage.

8. Troubleshooting

ProblemPossible CauseSolution
Drone does not respond to remote control.Not paired; remote control batteries low; drone battery low.Re-pair the drone and remote; replace remote batteries; charge drone battery.
Drone flies erratically or drifts.Not calibrated; damaged propellers; uneven surface during takeoff.Perform one-click calibration; replace damaged propellers; ensure drone is on a flat surface for takeoff.
Short flight time.Battery not fully charged; old battery.Ensure battery is fully charged; consider replacing the battery if it's old.
Drone does not take off.Drone battery low; propellers blocked; not paired.Charge drone battery; check for obstructions around propellers; re-pair drone and remote.

9. User Tips

  • For beginners, start flying in a large, open indoor space to get accustomed to the controls.
  • Utilize the altitude hold feature for easier and more stable hovering.
  • Practice one-click takeoff and landing to master basic control before attempting advanced maneuvers.
  • The drone's small size makes it ideal for indoor flight, but ensure adequate space to avoid collisions.

10. Warranty and Support

For warranty information, technical support, or any questions regarding your 4DRC V18 Mini Drone, please contact the seller or manufacturer directly through your purchase platform. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.