Yanzeo L1100

Contents

Yanzeo L1100 USB Barcode Scanner Instruction Manual

Model: L1100 | Brand: Yanzeo

1. Introduction

The Yanzeo L1100 USB Barcode Scanner is a CCD barcode scanner designed for fast and accurate scanning. It offers a plug-and-play experience, making it suitable for various applications such as in offices, warehouses, and for scanning books. This manual provides essential information for setting up, operating, and maintaining your scanner.

Yanzeo L1100 USB Barcode Scanner

Figure 1: Yanzeo L1100 USB Barcode Scanner

2. Safety Information

  • Do not expose the scanner to extreme temperatures, humidity, or direct sunlight.
  • Avoid dropping the scanner or subjecting it to severe impacts. The device is designed to withstand a 1.5m drop on a concrete surface, but excessive force may cause damage.
  • Keep the scanner away from water and other liquids.
  • Do not attempt to open or repair the scanner yourself. Refer to qualified service personnel.
  • Use a soft, dry cloth for cleaning. Avoid abrasive cleaners.
  • The operational light source is a visible laser (650-670nm). Avoid direct eye exposure to the laser beam.

3. Package Contents

Please check the package for the following items:

  • Yanzeo L1100 Barcode Scanner
  • USB Cable (2M or 6ft straight cable)
  • Instruction Manual (this document)
Yanzeo L1100 Barcode Scanner with USB Cable

Figure 2: Scanner with attached USB cable

4. Product Overview

The Yanzeo L1100 is a handheld barcode scanner featuring an ergonomic design for comfortable operation. It includes LED and buzzer indicators for feedback during scanning.

Top-down view of Yanzeo L1100 Barcode Scanner

Figure 3: Top view of the scanner, showing the scanning window.

Yanzeo L1100 Barcode Scanner features

Figure 4: Key features of the scanner, including USB connectivity, LED/buzzer indicators, and ergonomic design.

5. Setup

The Yanzeo L1100 barcode scanner is designed for plug-and-play operation, requiring no additional driver installation for most operating systems.

  1. Locate an available USB port on your computer.
  2. Connect the USB cable from the scanner to the USB port on your computer.
  3. The computer will automatically detect and install the necessary drivers. This process may take a few moments.
  4. Once installed, the scanner is ready for use. You may hear a beep or see an LED indicator light up, signifying successful connection.

6. Operating Instructions

The scanner supports two primary upload modes for barcode data:

Diagram showing Instant Upload Mode and Storage Mode for barcode scanner

Figure 5: Illustration of the two data upload modes.

6.1. Instant Upload Mode

In Instant Upload Mode, barcodes are synchronously uploaded to your computer as soon as they are scanned. This mode is ideal for real-time data entry into applications like spreadsheets, word processors, or POS systems.

  1. Ensure the scanner is connected to your computer and recognized.
  2. Open the application where you want the scanned data to appear (e.g., Notepad, Excel).
  3. Position the scanner's window over the barcode you wish to scan.
  4. Press the trigger button. A successful scan will be indicated by a beep and/or an LED flash.
  5. The barcode data will immediately appear in your active application at the cursor's position.

6.2. Storage Mode

Storage Mode allows you to store scanned barcodes directly within the scanner's internal memory. This is useful when working away from a computer or when you need to batch upload data later. The scanner supports storing up to 100,000 barcodes.

  1. To activate Storage Mode, you may need to scan a specific configuration barcode (refer to advanced programming guide if available).
  2. Scan barcodes as usual. Each successful scan will be stored in the scanner's memory.
  3. To upload the stored barcodes to your computer, connect the scanner via USB.
  4. Open a text editor or similar application.
  5. Scan the "Upload Barcodes" configuration barcode (if applicable) or follow specific software instructions to transfer the data. The stored barcodes will then be uploaded to your computer.

The scanner operates at a speed of 200 scans per second, with an inclination angle of 55° and an elevation angle of 65°.

7. Maintenance

To ensure optimal performance and longevity of your Yanzeo L1100 barcode scanner, follow these maintenance guidelines:

  • Cleaning: Regularly clean the scanning window with a soft, lint-free cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid spraying liquids directly onto the scanner.
  • Cable Care: Inspect the USB cable periodically for any signs of wear or damage. Avoid bending or twisting the cable excessively.
  • Storage: When not in use, store the scanner in a clean, dry environment, away from direct sunlight and extreme temperatures.

8. Troubleshooting

If you encounter issues with your scanner, please refer to the following common troubleshooting steps:

ProblemPossible CauseSolution
Scanner not recognized by computerLoose USB connection, faulty USB port, driver issue.
  • Ensure the USB cable is securely connected to both the scanner and the computer.
  • Try a different USB port on your computer.
  • Restart your computer.
Scanner not reading barcodesBarcode damaged, incorrect scanning angle, scanner in wrong mode.
  • Ensure the barcode is clean and undamaged.
  • Adjust the scanning angle and distance.
  • Verify the scanner is in the correct operating mode (e.g., Instant Upload Mode).
  • Check if the scanning window is clean.
No beep/LED indicator after scanUnsuccessful scan, indicator settings.
  • Reposition the scanner and try scanning again.
  • Ensure the scanner is properly connected.
  • (If applicable) Check scanner configuration for sound/LED settings.

9. Specifications

FeatureDetail
Product TypeBar Code Scanner
Model NumberL1100
Brand NameYanzeo
TypeBarcode Scanner
Interface TypeUSB
Scanning Light SourceLED (Visible Laser 650-670nm)
Scan Element TypeCMOS
Scan Speed200 scans/second
Optical Resolution300*300
Colour Depth32 Bit
Scan BreadthA4
Dimensions150mm x 90mm x 65mm
Weight115g
Cable Type2M or 6ft straight USB cable
Shock Resistance1.5m drop on concrete surface
Decode CapabilityCode11, Code39, Code93, Code32, Code128, Coda Bar, UPC-A, UPC-E, EAN-8, EAN-13, JAN.EAN/UPC Add-on2/5 MSI/Plessey, Telepen and China Postal Code, Interleaved 2 of 5, Industrial 2 of 5, Matrix 2 of 5.

10. User Tips

No specific user tips were available from reviews or Q&A for this product. However, general tips for barcode scanners include:

  • For optimal scanning, ensure good lighting conditions and hold the scanner at an appropriate distance and angle from the barcode.
  • If scanning multiple barcodes quickly, ensure there's a slight pause between scans to allow the system to process each entry.
  • Keep the scanning window clean to prevent misreads.

11. Warranty and Support

For warranty information or technical support regarding your Yanzeo L1100 USB Barcode Scanner, please contact your retailer or the manufacturer directly. Please have your model number (L1100) and any purchase details ready when seeking support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.