Introduction
This manual provides essential information for the safe and effective use of your AMBITFUL VL15B Bi-color or VL15C RGB Full Color Fill Light. Designed for various photography and videography scenarios, these lights enhance shooting quality and operational convenience. Please read this manual thoroughly before operation.
Important Note: This manual is for general guidance. For detailed operating procedures, parameter settings, troubleshooting, and a complete accessory list, please refer to the physical manual included in your product packaging for accuracy.
Safety Operation Warning
- Before use, carefully read the complete instruction manual attached to the physical object, strictly follow the operating procedures, and avoid any violations that may cause damage to the product or personal safety risks.
- The product should not be placed near high temperature, humidity, open flames, or strong magnetic fields to avoid water ingress, collision, falling, or squeezing, and to prevent damage to internal components.
- Do not disassemble or modify the product without authorization. Unauthorized disassembly will affect after-sales support.
- When charging photography products (such as photography lights), please use the original charger to charge, avoid overcharging and overdischarging, keep away from flammable materials during charging, and dispose of waste batteries properly according to environmental standards.
What's in the Box
Upon receiving your product, please verify that all components are present and undamaged. The standard package typically includes:
- Panel Fill Light (VL15B or VL15C) x1
- Adapter x1
- Type-C Cable x1
- User Manual x1
- Packing Box x1
- Mounting Adapter (e.g., cold shoe mount)
Product Overview and Parts Identification
Familiarize yourself with the different parts of your AMBITFUL fill light:
- ON/OFF Switch: Powers the device on or off.
- Display Screen: Shows current settings like brightness, color temperature, and battery level.
- Mode Button: Cycles through different lighting modes (e.g., CCT, RGB, FX).
- Dimmer Knob: Adjusts brightness and other parameters.
- CH/GR Button (Channel/Group): For wireless control and grouping multiple lights.
- Battery Compartment: For NP series batteries (e.g., NP-F550/F750/F970).
- Type-C Interface: For power input (5-20V DC) and charging.
- 1/4" Screw Hole: Universal mounting point for tripods, light stands, or cameras.
- Heat Emission Holes: Designed for efficient heat dissipation to protect LED lamp life.
Setup
1. Powering the Device
- Battery Installation: Open the battery compartment and insert a compatible NP series battery (e.g., NP-F550/F750/F970). Ensure correct polarity.
- External Power: Connect the provided Type-C cable to the light's Type-C interface and to a suitable USB power source (5-20V DC).
2. Mounting the Light
The light features a universal 1/4" screw hole for versatile mounting options.
- Attach the light to a tripod, light stand, or camera using the 1/4" screw hole and the included mounting adapter.
3. APP Control (Optional)
For advanced control and customization, download the ambitfulPro APP.
- Ensure Bluetooth is enabled on your smartphone.
- Open the ambitfulPro APP and follow the in-app instructions to connect to your VL15B/C light.
Operating Instructions
Adjust the product functions (such as brightness, angle, focal length, etc.) according to the detailed parameters and operation steps in the physical manual, combined with your own shooting needs. Handle gently during operation to avoid excessive force.
1. Basic Operation
- Power On/Off: Use the ON/OFF switch located on the side of the light.
- Mode Selection: Press the 'MODE' button to cycle through CCT (Color Temperature), HSI (Hue, Saturation, Intensity), and FX (Special Effects) modes.
- Parameter Adjustment: Use the 'Dimmer' knob to adjust values (e.g., brightness, color temperature, hue, saturation) within the selected mode.
- Channel/Group: Use the 'CH/GR' button to set channels and groups for multi-light control.
2. Color Temperature (CCT) Mode
Both VL15B and VL15C support CCT mode, offering a wide range of color temperatures from 2800K (warm light) to 6800K (cool light).
- In CCT mode, use the dimmer knob to precisely adjust the color temperature.
- Brightness can also be adjusted from 0-100% in this mode.
3. RGB Full Color Mode (VL15C Only)
The VL15C model features a full RGB mode with 36000 colors, allowing for creative lighting effects.
- In RGB mode, you can adjust Hue (0-360°), Saturation (0-100%), and Brightness (0-100%).
- This mode is ideal for adding vibrant colors to your shots.
4. Special Light Effects (FX Mode)
Both models offer built-in dynamic FX effects to transform ambiance. The VL15C has more effects than the VL15B.
- VL15B/C Common Effects: Lightning, Explode, Flash, Break Bulb, Electric Welding, SOS, Candle, Bonfire, CCT Cycle, TV Screen.
- VL15C Only Effects (16 RGB effects): Firework 1, Firework 2, Firework 3, Club 1, Club 2, RGB Cycle, Romantic, Police Car, Ambulance, Fire Truck, Red Breathing Light, Green Breathing Light, Blue Breathing Light, Cyan Breathing Light, Magenta Breathing Light, Yellow Breathing Light.
Specifications
Below are the key technical specifications for the AMBITFUL VL15B and VL15C fill lights:
| Feature | VL15C (RGB) | VL15B (Bi-color) |
|---|---|---|
| Power | 15W | 18W |
| Max. Luminous Flux | 1350Lm | 1600Lm |
| Max. Illuminance (0.5m) | 1720Lux | 1550Lux |
| Number of Beads | Warm white/Cold white/RGB 75PCS | Warm white/Cold white 99PCS |
| RGBW | 0-360° (Adjustable) | N/A |
| CCT (Color Temperature) | 2800K-6800K (Adjustable) | |
| Brightness Adjustment Range | 0 - 100% | |
| Voltage Range | USB (5-20V DC) | |
| Power Source | USB / Li-ion Battery (NP-F series) | |
| Battery Series | NP-F550/F750/F970 series | |
| Battery Endurance (4400mAh, 7.4V) | 120min | |
| Dimension | 175.8 × 112.4 × 39mm | |
| Net Weight (bare light) | ≈ 263g | |
| CRI | RA≥95 | |
| TLCI | TLCI≥95 | |
| Illumination Angle | 120° | |
| FX Type | 26 | 10 |
Maintenance
Proper maintenance ensures the longevity and optimal performance of your fill light:
- Cleaning: After each use, gently clean any surface stains on the product.
- Storage: Disassemble any detachable parts (if applicable) and store the light in its original packaging or a dedicated storage bag. Keep it in a dry, ventilated, and cool place.
- Regular Checks: Periodically check the condition of the product to prevent component aging due to long-term idleness.
Troubleshooting
If you encounter any issues with your AMBITFUL fill light, follow these steps:
- Self-Inspection: If the product experiences problems such as inability to start or abnormal functions, first refer to the troubleshooting section of the physical manual for self-inspection.
- Contact Support: If self-inspection is unsuccessful, contact customer service. Provide your order information and detailed fault description for professional assistance.
User Tips
- Always ensure the battery is fully charged before important shoots to avoid interruptions.
- Experiment with the various FX modes to add creative flair to your videos and photos.
- Utilize the ambitfulPro APP for fine-tuning color and brightness, especially when precise control is needed.
- Consider using a diffuser (if included or purchased separately) for softer, more even lighting.
Warranty and Support
For any questions or issues during use, please contact the store customer service. They will verify and assist you as soon as possible. Please note that unauthorized disassembly or modification of the product will affect after-sales support.
A PDF version of the user manual is available for download: Download User Manual (PDF)