K&F CONCEPT O234A7+BH-28L

Contents

K&F Concept O234A7+BH-28L Camera Tripod Instruction Manual

Model: O234A7+BH-28L | Brand: K&F CONCEPT

1. Introduction

Thank you for choosing the K&F Concept O234A7+BH-28L Camera Tripod. This versatile and portable aluminum tripod is designed for DSLR and video cameras, offering a maximum extended height of 2 meters and a load capacity of 10 kg (22 lbs). It features a detachable monopod and a 360-degree metal ball head, making it suitable for various photography and videography needs, including vlogging, overhead, and low-angle shooting. Please read this manual carefully to ensure proper setup, operation, and maintenance of your tripod.

2. Package Contents

Please check the package to ensure all items are present:

  • 1x K&F Concept O234A7+BH-28L Tripod
  • 1x Tripod Bag
  • 1x Instruction Manual
  • 1x Hex Key (for adjustments)
K&F Concept O234A7+BH-28L Tripod package contents
Figure 2.1: Contents of the K&F Concept O234A7+BH-28L Tripod package.

3. Specifications

Table 3.1: K&F Concept O234A7+BH-28L Tripod Specifications
FeatureSpecification
Model NumberO234A7+BH-28L
Brand NameK&F CONCEPT
MaterialAluminum
TypeMini Tripod / Lightweight
UseVideo Camera, DSLR Camera
Leg Sections4
Tube Diameter23 mm / 0.91"
Max Extended Length200 cm / 78.7" (2m)
Folded Length49 cm / 19.29"
Load Capacity10 kg / 22 lbs
Weight1.44 kg / 3.17 lbs
Tripod specifications table
Figure 3.1: Detailed specifications of the tripod.

Ball Head BH-28L (Original Model: KF-28) Specifications

FeatureSpecification
Load Capacity10 kg / 22 lbs
Ball Diameter1.1" / 28 mm
Weight0.26 kg / 0.58 lbs
Bottom Interface3/8"
Height3.15" / 80 mm
MaterialAluminum Alloy
Ball Head BH-28L specifications and labeled parts
Figure 3.2: Detailed specifications and labeled components of the BH-28L Ball Head.

4. Setup Instructions

4.1 Unfolding the Tripod

  1. Release the leg locks on each of the tripod legs.
  2. Extend each leg section to your desired height.
  3. Securely fasten all quick release flip-locks to ensure stability.
  4. Adjust the leg angles using the angle adjustment tabs near the top of each leg. The legs can be set at three different angles for varied stability and height.
Tripod leg angle adjustment mechanism
Figure 4.1: Close-up of the leg angle adjustment mechanism.
Tripod height variations
Figure 4.2: Various height configurations of the tripod, from folded to fully extended.

4.2 Attaching Your Camera

  1. Ensure the quick release plate locking knob on the ball head is loose.
  2. Attach the quick release plate to the bottom of your camera using the 1/4 inch screw. Tighten securely.
  3. Slide the quick release plate with your camera into the ball head receiver.
  4. Tighten the quick release plate locking knob to secure your camera in place.
Ball head with camera attached
Figure 4.3: Camera mounted on the ball head, illustrating the quick release plate and controls.

4.3 Monopod Conversion

One of the tripod legs can be detached and used as a monopod:

  1. Identify the leg with the foam grip. This is the detachable leg.
  2. Unscrew this leg from the tripod chassis.
  3. The ball head can be attached to the top of the detached leg to form a monopod.
Detachable monopod diagram
Figure 4.4: Diagram illustrating the conversion of a tripod leg into a monopod.

5. Operating Instructions

5.1 Ball Head Operation

The BH-28L ball head features two independent control knobs:

  • Main Knob: Controls the movement and locking of the ball, allowing for tilt and swivel adjustments.
  • 360° Panorama Knob: Allows for smooth, independent 360-degree rotation of the camera for panoramic shots without affecting the ball's tilt.
360-degree panoramic shooting demonstration
Figure 5.1: Demonstration of 360-degree panoramic shooting using the ball head's rotation feature.

5.2 Multi-angle Shooting

  • Low-Angle Shooting: The center column can be inverted to achieve extremely low-angle shots. Carefully remove the center column, invert it, and reattach it to the tripod chassis.
  • Overhead Shooting: Extend the tripod to its maximum height for overhead perspectives.
  • Creative Angles: Utilize the ball head's damping system to set your camera at various angles, including vertical or upside-down shots, to capture unique perspectives.
Inverted shooting setup for low angles
Figure 5.2: Example of inverted shooting for capturing subjects from a very low perspective.
Overhead shooting setup
Figure 5.3: The tripod configured for overhead shooting, capturing a scene from above.

5.3 Multi-functional Accessory Extension

The tripod is designed to accommodate additional accessories. Depending on your setup, you can attach items like smartphones or external microphones to enhance your shooting experience.

Tripod with multi-functional accessory extension
Figure 5.4: The tripod demonstrating its capability for multi-functional accessory extension, such as attaching a smartphone.

6. Maintenance

Proper maintenance will extend the life of your K&F Concept tripod:

  • Cleaning: After use, especially in dusty, sandy, or wet environments, wipe down the tripod with a clean, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly.
  • Lubrication: Moving parts, such as leg locks and ball head mechanisms, may benefit from occasional light lubrication with a silicone-based lubricant. Avoid oil-based lubricants as they can attract dust.
  • Storage: Store the tripod in its carrying bag in a cool, dry place away from direct sunlight and extreme temperatures.
  • Inspection: Regularly check all screws, bolts, and quick release mechanisms for tightness. Use the provided hex key to tighten any loose components.
  • Avoid Overloading: Do not exceed the maximum load capacity of 10 kg (22 lbs) to prevent damage to the tripod and your equipment.

7. Troubleshooting

If you encounter issues with your tripod, refer to the following common problems and solutions:

  • Tripod is unstable:
    • Ensure all leg sections are fully extended and their quick release flip-locks are securely fastened.
    • Verify that the leg angle adjustments are properly engaged.
    • Check that the camera is securely mounted to the quick release plate and the plate is locked into the ball head.
    • Ensure the ground surface is level and stable.
  • Ball head movement is stiff or loose:
    • Adjust the main knob on the ball head to control the friction and locking mechanism.
    • If stiff, clean the ball head mechanism and apply a small amount of appropriate lubricant if necessary.
  • Leg sections do not extend or retract smoothly:
    • Clean the leg sections to remove any dirt or debris that might be obstructing movement.
    • Check the quick release flip-locks for any damage or misalignment.

8. User Tips

No specific user tips were available from provided reviews or Q&A content. However, general best practices for tripod use include:

  • Always test the stability of your setup before leaving your camera unattended.
  • When carrying the tripod with a camera attached, always hold the tripod legs, not just the camera.
  • For maximum stability, extend the thickest leg sections first and keep the center column as low as possible.
  • Use a counterweight if shooting with heavy lenses or in windy conditions, especially when the center column is extended.

9. Warranty and Support

The K&F Concept O234A7+BH-28L Tripod comes with a 1-year warranty, as indicated on the product packaging. For warranty claims, technical support, or any product-related inquiries, please contact K&F CONCEPT Official Store directly through your purchase platform or their official website. Please retain your proof of purchase for warranty validation.

© 2024 K&F CONCEPT. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.