SLMPLEFUN DIMMER01+WP073DIM+KT203DIM

Contents

SLMPLEFUN 433mhz Wireless Dimmer Light Switch Instruction Manual

Model: DIMMER01+WP073DIM+KT203DIM

Brand: SLMPLEFUN

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your SLMPLEFUN 433mhz Wireless Dimmer Light Switch. This product is designed to provide convenient wireless control and stepless dimming for compatible lighting fixtures. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.

Video: Product usage demonstration showing the dimmer switch in action.

2. Safety Information

  • Always disconnect power at the circuit breaker before installing or servicing the dimmer switch.
  • Installation should be performed by a qualified electrician or in accordance with local electrical codes.
  • Do not exceed the maximum load rating of 150W.
  • Ensure the product is used within the specified AC 110V~250V voltage range.
  • This product is not suitable for lamps with transformers or ballasts.
  • Keep the device away from water and high humidity environments.

3. Package Contents

Depending on your purchase option, your package may include:

  • Mini Dimmer Receiver Module
  • RF433mhz Wireless Wall Panel Switch (with 27A 12V battery, screws, double-sided tape)
  • 5-in-1 Remote Controller (with 23A 12V battery)
Image showing the dimmer receiver module, wall panel switch, and 5-in-1 remote control with their dimensions and included accessories.

Image: Components and dimensions of the dimmer system.

4. Specifications

AttributeValue
Brand NameSLMPLEFUN
Model NumberDIMMER01+WP073DIM+KT203DIM
Item TypeSWITCHES
Switch TypeRemote Control
MaterialPlastic
FeaturesWireless remote control
Is Smart DeviceNo
OriginMainland China
CertificationRoHS, CE
EU LVD VoltageLow voltage: Below 50Vac or 75Vdc
High-concerned chemicalNone
Switch Working VoltageAC 110~250V 50/60 HZ
Max LOAD150W
Current1.35A
RF Frequency433.92MHz
Remote Distance50 meters (theoretical distance)
Receiver Size45*45*19mm
Code1527 learning code
Wall Panel Switch Size86*86*13 mm
Wall Panel Switch Battery27A 12V (included)
5-in-1 Remote control size110*38*15mm
5-in-1 Remote control Battery23A 12V (included)
Receiving Sensitivitymore than -97dbm
Amount of storage remote controlsAbout 15 pieces
Working Temperature-30~+80 Celsius
Modulation ModeASK superheterodyne wireless reception
Quiescent Currentless than 5mA
Application ScenarioLED Halogen Bulb

5. Setup and Installation

5.1. Compatibility

This dimmer switch is compatible with 10W-150W LED and Halogen bulbs operating on AC 110V-250V. It is not suitable for lamps with transformers, ballasts, or LED strips that require specific drivers.

Image showing compatible bulb types (LED, Halogen) and incompatible types (lamps with transformer/ballast, LED strips).

Image: Compatible and incompatible lamp types.

5.2. Wiring the Receiver Module

The mini dimmer receiver module can be wired in two ways:

  1. Without a Manual Switch: Connect the receiver directly to the lamp. This allows for pure remote control functionality.
  2. With a Manual Switch: Connect the receiver to both the lamp and an existing manual switch. This setup retains the functionality of the manual switch while also allowing remote control.
Wiring diagrams for the dimmer receiver module, showing connections without a manual switch and with a manual switch.

Image: Wiring diagrams for the receiver module.

Diagram showing the dimmer receiver module connected to a light and an existing manual switch, allowing both remote and manual control.

Image: Example of using the dimmer with an existing manual switch.

5.3. Mounting the Wall Panel Switch

The wireless wall panel switch can be mounted using the included screws or double-sided tape. Ensure it is placed within the 50-meter theoretical control distance of the receiver module.

6. Operation

6.1. Remote Control Functions

Both the 5-in-1 Remote Controller and the Wall Panel Switch offer the following functions:

  • ON/OFF Button: Turns the light on or off.
  • Brightness + Button: Increases the light brightness.
  • Brightness - Button: Decreases the light brightness.

The 5-in-1 Remote Controller also features a Channel Changing Button to switch between controlling up to five different lights/receivers.

Image illustrating the buttons and their functions on the 5-in-1 remote control: ON/OFF, Brightness +, Brightness -, and Channel Changing Button.

Image: 5-in-1 Remote Control functions.

Image showing the wall panel switch with ON/OFF, Brightness + and Brightness - buttons, and indicating a 50m control distance.

Image: Wall Panel Switch functions and control distance.

6.2. Stepless Dimming

Press and hold the Brightness + or Brightness - buttons to smoothly adjust the light intensity. Release the button when the desired brightness level is reached.

7. Pairing and Configuration

7.1. Clearing Existing Data

To clear any previously paired remote controls from the receiver module:

  1. Press the learning button on the receiver module 8 times.
  2. Existing data will be successfully deleted.

7.2. Pairing a Remote Control

To pair a remote control (5-in-1 remote or wall panel switch) with the receiver module:

  1. Press the learning button on the receiver module 1 time.
  2. Immediately press any button on the remote control (e.g., the ON/OFF button) 1 time.
  3. Wait for 3 seconds. The pairing process should be successful.
Diagram showing how to pair an RF433Mhz signal by pressing the learning button on the receiver once, then a button on the remote once. Also shows how to clear data by pressing the learning button eight times.

Image: Instructions for pairing and clearing data.

7.3. Pairing Multiple Remotes

One receiver module can be paired with up to approximately 15 remote controls (including wall panel switches and 5-in-1 remotes) to control the same light. Repeat the pairing process (Section 7.2) for each additional remote control.

Image demonstrating one receiver module being controlled by multiple remote controls (up to 5 shown).

Image: Multiple remotes controlling one receiver.

8. Troubleshooting

  • Light does not respond to remote: Ensure the receiver module is correctly wired and powered. Check if the remote control battery is functional. Re-attempt the pairing process (Section 7.2).
  • Dimming not working or flickering: Verify that your lamp is compatible (not using a transformer/ballast). Ensure the lamp's wattage is within the 10W-150W range.
  • Remote control commands are swapped: This can sometimes occur. Try clearing all data (Section 7.1) and re-pairing the remote control.
  • Light does not remember previous state with manual switch: If using with a manual switch, the system might not retain the 'on' state if the manual switch is used to turn off power completely. It is recommended to leave the manual switch 'on' and use the remote for control, or re-evaluate wiring if state retention is critical.
  • Remote control distance is short: Ensure there are no significant obstructions between the remote and the receiver. The 50m range is a theoretical distance in open space.

9. User Tips

  • Easy Setup: Many users report quick and easy installation and pairing. Follow the instructions carefully for a smooth setup.
  • Versatile Control: The ability to pair multiple remotes to one receiver is highly appreciated for controlling lights from different locations.
  • Dim-to-Warm LEDs: The stepless dimming works well with compatible dim-to-warm LED spotlights.
  • Check Compatibility: Double-check that your lamps do not have transformers or ballasts to avoid compatibility issues and flickering.

10. Warranty and Support

This product comes with a 1-year warranty. For any questions, technical support, or warranty claims, please contact the seller directly.

A detailed user manual in PDF format is also available for download: View User Manual (PDF)

Image displaying various certifications including CE, FC, UK CA, and RoHS.

Image: Product Certifications.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.