Lemorele G500

Contents

Lemorele G500 Wireless HDMI Transmitter Receiver User Manual

Model: G500 / G600

1. Product Overview

The Lemorele G500/G600 is a point-to-point wireless display solution designed for seamless screen sharing without the need for Wi-Fi. It enables wireless transmission of HD video between devices and displays, making it ideal for conference presentations, office screen sharing, and home entertainment. Key features include high stability, low latency, and user-friendly portability.

This system supports up to 8 transmitters to 1 receiver, allowing multiple users to share their screens by simply pressing a button. The transmitters feature a built-in 2000mAh battery for up to 3.5-4 hours of continuous operation, eliminating the need for external power cables during use.

Lemorele G500 Wireless HDMI Transmitter and Receiver with charging dock
The Lemorele G500 Wireless HDMI Transmitter and Receiver system.

2. Specifications

FeatureTransmitter (TX)Receiver (RX)
Resolution1080P1080P
Wi-Fi Band5GHz
Power SupplyBattery PoweredAdapter Charging
Battery Capacity2000mAhN/A
Transmission Distance50M (165 Ft)
Exterior MaterialABS Plastic
Base Power5V2AN/A
Operating Temperature0-50°C
Charging PortMagneticUSB-C

3. Package Contents

The package includes:

  • 1 x Charging Dock
  • 1 x Wireless Transmitter (TX)
  • 1 x Wireless Receiver (RX)
  • 1 x User Guide
  • 1 x Nano 3M Adhesive Pad
  • 2 x 100cm USB-C Cables
Package contents of Lemorele G500 Wireless HDMI Extender, showing the charging dock, TX and RX units, user manual, adhesive pad, and USB-C cables.
Included items in the Lemorele G500 package.

4. Product Structure and Buttons

Transmitter (TX)

Diagram of the Transmitter (TX) unit, showing the Mode button, Power button, Battery, Power indicator light, Magnetic charging port, and HD port.
Transmitter (TX) unit with labeled components.
  • Mode button: Used for pairing and privacy mode.
  • Power button: Used to turn the device on/off.
  • Battery: Internal 2000mAh battery.
  • Power indicator light: Shows battery level and charging status.
  • Magnetic charging port: For charging the TX unit on the charging dock.
  • HD port: Connects to the source device (e.g., laptop).

Receiver (RX)

Diagram of the Receiver (RX) unit, showing the Mode button, Reset button, USB-C power port, and HD port.
Receiver (RX) unit with labeled components.
  • Mode button: Used for pairing and resetting the device.
  • Reset button: Used to reset the device to factory settings.
  • USB-C power port: For connecting to a power adapter (5V/2A).
  • HD port: Connects to the display device (e.g., TV, projector).

5. Setup Instructions

5.1. Indicator Light Status

Transmitter Status LightReceiver Status Light
Slow Flash: Not PairedFast Flash: Pairing
Fast Flash: PairingSteady Light: Connected
Steady Light: Connected

The side indicator lights on the transmitter represent 25% of the battery for each light. Flashing lights indicate charging in progress. When fully charged, the lights remain steady.

Image showing the intuitive LED indicator on the transmitter, with four lights representing 25%, 50%, 75%, and 100% power levels.
Intuitive LED Indicator: Each LED represents 25% of power.

5.2. Connection Diagram

Connection diagram showing the Transmitter (TX) connected to a laptop and the Receiver (RX) connected to a display, with power connections.
Visual representation of the connection setup.

5.3. Step-by-Step Connection

  1. Connect the Receiver (RX):

    Insert the HDMI port of the receiver into the HDMI input port of your display device (e.g., TV, projector). Connect the receiver to a power adapter or a USB port (5V/2A) using the included USB-C cable to ensure it is powered correctly. Switch your display device to the corresponding HDMI input channel until the receiver's startup screen appears.

  2. Connect the Transmitter (TX):

    Insert the HDMI port of the transmitter into the HDMI output port of your computer, laptop, or other video output device. Briefly press the power button on the transmitter for 0.5 seconds to turn it on. The indicator light on the transmitter will start flashing rapidly. After a few seconds, the video will automatically sync to the display device.

  3. Projection Complete:

    The projector is plug-and-play, requiring no additional configuration. After connection, the device will automatically match the optimal resolution for a smooth display.

Video demonstrating the easy "Click and Go" setup for the wireless HDMI system.

6. Operating Instructions

6.1. Charging Dock and Anti-Slip Mat Usage

  • Anti-Slip Mat: Place the charging dock on the anti-slip mat for stability. The mat can be cleaned with water to restore its stickiness.
  • Transmitter Charging: Connect the included USB-C cable to the charging dock. Place the transmitter on the dock to charge it. The indicator light will flash during charging and remain steady when fully charged. The dock supports forward and reverse charging.
Image showing the Nano 3M Adhesive pad, highlighting its non-trace and reusable after washing features.
Nano 3M Adhesive Pad features.
Image showing the magnetic charging feature of the transmitter units on the charging dock.
Magnetic Charging for easy use.

6.2. Pairing Steps

The device is factory-paired and typically requires no manual operation. If pairing fails, follow these steps:

  1. Briefly press the side power button on the transmitter for 0.5 seconds to enter power-on mode.
  2. Press and hold the front mode button on the transmitter for 5 seconds until the indicator light flashes rapidly. The transmitter will enter pairing mode.
  3. Press and hold the front mode button on the receiver for 5 seconds. After the indicator light flashes rapidly, the receiver will enter pairing mode, and the display will show a pairing countdown.
  4. Wait for the transmitter and receiver to automatically complete pairing.

6.3. Multi-Transmitter to Single-Receiver

This product supports up to 8 transmitters with 1 receiver. For an enhanced experience, additional G500-TX transmitters can be purchased separately.

Diagram showing a single receiver connected to a display, with multiple transmitters (up to 8) wirelessly connecting to it for screen sharing.
Support for up to 8 Transmitters (TX) to 1 Receiver (RX).

7. Maintenance

  • Anti-Slip Mat: The Nano 3M adhesive pad can be cleaned with water to restore its stickiness.
  • General Cleaning: Use a soft, dry cloth to clean the transmitter, receiver, and charging dock. Avoid using harsh chemicals or abrasive materials.
  • Storage: Store the device in a cool, dry place when not in use.

8. Troubleshooting

Q: How long can the battery last when fully charged? How long does it take to fully charge?
A: The transmitter's battery supports about 3.5 to 4 hours of continuous operation. The charging time is approximately 2.5 hours. Actual performance may vary depending on the situation.
Q: Why is the projection not displaying correctly?
A: Please check if the transmitter and receiver are properly connected and powered on. Also, confirm that the signal source on the display device has been set to the correct HDMI input port.
Q: What should I do if there is a delay during projection?
A: Ensure there are no obstacles between the transmitter and the receiver, and try to use the devices as close as possible. Also, make sure the wireless signal in the environment is stable.
Q: What resolutions does the device support?
A: The point-to-point projector supports the following resolutions: 1152x864 / 1200x900 / 1280x800 / 1280x1024 / 1024x768 / 800x600 / 1280x720 / 1920x1080.
Q: How can I reset the device?
A: If the product malfunctions, press and hold the mode button on the receiver for 15 seconds. Once the screen goes black and restarts, the device will be restored to factory settings.
Q: How do I enter privacy mode?
A: Briefly press the mode button on the transmitter to disconnect or reconnect.

9. Safety Precautions

  • Do not use this product in environments with high temperature or high humidity.
  • Avoid water, liquids, and other substances entering the product to prevent short circuits or device damage.
  • During use, do not forcefully unplug the HDMI or power cables to avoid damaging the ports.

10. User Tips

  • For optimal performance, ensure the transmitter and receiver are within the 50-meter transmission range and have a clear line of sight.
  • Keep the anti-slip mat clean by washing it with water to maintain its adhesive properties.
  • When using multiple transmitters, remember that the system supports up to 8 TX units for seamless switching.
  • The TX unit's built-in battery provides portability for meetings, but ensure it's charged for longer sessions.

11. Warranty and Customer Support

If you need assistance, you can contact Lemorele customer support by following these steps:

  1. Log into your account and go to "Your Orders."
  2. Select "Order Issues" next to the relevant order.
  3. Send a message via "Contact Seller."
  4. Alternatively, for technical support, you can contact support@lemorele.com.

The product comes with a 1-year warranty and lifetime technical support. Email support is available within 24 hours on business days.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.