1. Introduction
This manual provides comprehensive instructions for the safe and efficient operation of the TBK 958A Auto Focus Laser Printing Engraving Marking Machine. This device is designed for precise laser marking, engraving, and separating tasks, particularly for mobile phone back glass removal and frame separation.
Product Features
- High-precision sensing chip for stable measurement and low temperature drift.
- All stainless steel structure, offering shockproof and corrosion-resistant properties for long service life.
- Wide voltage input and standard industrial signal output.
- Compatible with PLC, digital meters, inverters, and various control systems.
- Compact size, ensuring easy installation and reliable sealing.
- IP65 protection, making it suitable for both indoor and outdoor industrial environments.
- Built-in HD computer and Bluetooth keyboard for convenient operation.
- Automatic focus and automatic lifting functions.
- Fixed and reliable laser head.
- Three access detaching ports (upper, left, and right).
- One-button start for ease of use.
Applications
- Industrial automation equipment.
- Suitable for mobile phones, decoration, crafts and other industries.
- Automotive test and modification equipment.
2. Safety Notes
WARNING: Failure to follow these safety instructions may result in injury or damage to the device.
- This product is NOT explosion-proof. Do not use in flammable or explosive environments.
- Disconnect power before wiring. Reverse wiring may damage the module.
- Keep away from strong electromagnetic interference sources.
- Do not disassemble or modify the product by yourself; this will void the warranty.
- Please follow industrial safety standards during installation and use.
3. Setup and Installation
3.1. Unpacking and Inspection
Carefully unpack the machine and all accessories. Inspect for any visible damage. Retain the packaging for future transport or storage.
3.2. Installation Instructions
- Install the machine in a stable position without strong vibration or impact.
- Ensure the measured medium (if applicable for pressure sensing applications) is non-corrosive and compatible with the sensor.
- Do not apply long-term over-range pressure to avoid permanent damage.
3.3. Wiring (3-Wire System)
Ensure power is disconnected before performing any wiring. Incorrect wiring can damage the module.
- VCC: Connect to Positive power supply (5V / 12V / 24V DC, as per your model's requirement).
- GND: Connect to Negative power supply / Ground.
- OUT: Signal output.
4. Operating Instructions
The TBK 958A features a built-in HD computer and a user-friendly interface for operation.
4.1. Power On and System Access
- Ensure all connections are secure and power supply is stable (110V/220V).
- Press the "Start" button to power on the machine.
- The built-in HD computer will boot up. Use the provided Bluetooth keyboard and mouse to navigate the operating system and marking software.
4.2. Positioning and Focusing
- Place the object (e.g., mobile phone back glass) on the professional positioning workbench. The workbench offers convenient, fast, and precise positioning with a larger operating space.
- Adjust the object's position as needed. The marking object maximum height is 85mm.
- For automatic focusing, press the "Focus" button. The imported auto-focus sensor will automatically adjust the focal length. This eliminates the need for manual adjustment and ensures high precision.
- The electric motor lifting platform allows for precise height adjustment of the table. Use the "UP" and "Down" buttons to control the platform.
4.3. Laser Marking/Engraving/Separating
- Within the marking software on the built-in computer, select the desired pattern or input text for marking/engraving.
- Utilize the precise drawings and templates available in the system.
- Confirm the object's position and focus.
- Initiate the laser process via the software. The machine supports multiple etching methods.
- The machine is equipped with two radiators to speed up the process and maintain optimal operating temperature.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your TBK 958A machine.
- Keep the machine clean and free from dust and debris.
- Regularly check all connections for tightness and wear.
- Ensure the cooling system (radiators) is unobstructed and functioning correctly to prevent overheating.
- Do not attempt to clean the laser lens or internal components without proper training and tools. Contact support if cleaning is required.
- Store the machine in a stable, dry environment when not in use.
6. Troubleshooting
This section provides solutions to common issues you might encounter.
6.1. Machine Not Powering On
- Check if the power cable is securely connected to both the machine and the power outlet.
- Verify that the power outlet is functional.
- Ensure the "Start" button has been pressed.
6.2. Laser Not Firing or Weak Marking
- Check if the "Focus" function has been successfully completed. Incorrect focus can lead to weak or no marking.
- Ensure the object is correctly positioned on the workbench and within the marking area.
- Verify that the laser head is fixed and not loose.
- If the issue persists, contact technical support.
6.3. Software Issues
- Restart the built-in computer and the marking software.
- Ensure the Bluetooth keyboard and mouse are properly connected and charged.
- If the software is unresponsive or displaying errors, consult the software's help documentation or contact technical support.
7. Specifications
| Parameter | Value |
|---|---|
| Product Model | 958A |
| Brand Name | TBK / XMSJ |
| Operating Voltage | 110-220V |
| Product Power | 500W |
| Laser Power | 6W |
| Laser Marking Accuracy | max 0.001mm |
| Repeated Precision | ≤0.001mm |
| Laser Speed | max 10000mm/s |
| Cooling Method | Built-in cold air |
| Laser Wavelength | 1064nm |
| Marking Depth | 0.015-0.5mm |
| Dimensions Location (Marking Area) | 175mm x 175mm |
| Width of the Line | 0.05-0.1mm |
| Product Size (L*W*H) | 29*57*59.8cm |
| Screen Size | 20*15cm |
| Net Weight | 35kg |
| Gross Weight | 45kg |
| Package Size | 68*40*70cm |
| Certification | CE |
| Origin | Mainland China |
| Condition | New |
| Battery Included | No |
8. Package Contents
The standard package includes:
- 1 x TBK 958A Laser Printing Engraving Marking Machine
- 1 x User Manual (PDF available: User Manual PDF)
- 1 x Seal Gasket
- Bluetooth Keyboard and Mouse
- Power Cable
Note: There is no matching mold set for this product included in the standard package. If you need a mold set (e.g., universal pressure mold, automatic positioning mold), please contact the seller to purchase it separately.
9. Warranty and Support
9.1. Warranty
- Warranty Period: 12 months (1 Year)
- Coverage: Free after-sales service for non-human quality defects.
- Voiding Warranty: Disassembling or modifying the product by yourself will void the warranty.
9.2. Technical Support
Professional technical support is available for wiring and application assistance.
For any questions or support needs, please contact the seller directly. Contact information:
- WhatsApp: +86 15244291916
- Tel: +86 15244291916
- Email: andycong620@gmail.com
10. User Tips
- Precision Molds: For optimal results in mobile phone repair, consider purchasing the specific positioning molds designed for various phone models. While not included, they significantly enhance precision and ease of use.
- Software Familiarization: Take time to familiarize yourself with the built-in computer's operating system and the laser marking software. Practice with scrap materials before working on valuable items.
- Ventilation: Although the machine has built-in cold air cooling, ensure adequate ventilation in your workspace, especially during prolonged operation, to dissipate any fumes or heat generated.
