Micmol Wifi Controller 2.0 and Bluetooth APP User Manual

1. Introduction

This manual provides detailed instructions for the Micmol Wifi Controller 2.0 and Bluetooth APP Controller, designed to manage various Micmol aquarium LED lights. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

The controller is compatible with Micmol G3 Aqua Air series, Aqua CC, THOR, THOR X, THOR PRO, SOLO, and G4 Aqua Pro LED lights.

2. Product Overview

The Micmol controller offers smart settings including clock, timer, auto and manual modes for LED channels, and special effects like sunrise, sunset, and lightning. It also features a demo mode and factory reset option.

2.1 Wi-Fi Controller 2.0 Components

• Indicator Light:
  • White Flash Slowly: Indicates the device is waiting for pairing.
  • White Constant: Indicates the device is paired and online.
  • Flash Alternately: Indicates the device is performing a factory reset.
• Button:
  • Hold for 3 Seconds: Initiates a factory reset.
  • Double-Press: Switches operating modes.
• Ports:
  • 12V Expand
  • 24V Expand
  • DC Input
  • DC Output

2.2 Bluetooth APP Controller

This controller variant uses Bluetooth for app connectivity. Its physical interface and specific functions may vary slightly from the Wi-Fi model, but the core app control features remain similar.

3. Specifications

4. Setup Instructions

Follow these steps to set up your Micmol controller and connect it to the iMicMol APP.

4.1 App Download and Device Addition

1. Download and Open iMicMol APP: Search for "iMicMol" in your device's app store and install it. Open the application.
2. Tap "Add Device": On the app's home screen, tap the "Add Device" button to begin the pairing process.

4.2 Connecting the Controller (Wi-Fi Model)

3. Choose "Auto Scan": The app will automatically scan for available devices. Select your Micmol controller when it appears.
4. Enter your Router's Password: Input the password for your home Wi-Fi network (router) into the app to connect the controller to your network.

4.3 Completing Pairing and Control

5. Wait for Device Registration: The app will show a "Connecting..." screen as it registers the device to the Smart Cloud. Ensure your router, mobile phone, and device are close to each other during this process.
6. Turn "ON" to Control: Once successfully paired and registered, you can turn "ON" the control within the app to manage your LED light.

4.4 Connecting the Controller (Bluetooth Model)

For the Bluetooth APP Controller, ensure Bluetooth is enabled on your mobile device. After tapping "Add Device" in the iMicMol app, the app should detect the Bluetooth controller automatically. Follow any on-screen prompts to complete the pairing.

5. Operating Instructions

The iMicMol APP provides comprehensive control over your Micmol LED lights. Here are the key functions:

• Clock Setting: Set the precise time for your controller.
• Timer Function: Program on/off times and intensity levels for different periods throughout the day.
• Auto Mode: Utilize pre-programmed lighting cycles designed for optimal aquarium conditions.
• Manual Mode: Adjust LED channel intensity and color manually to your preference.
• Special Effects: Access and activate dynamic lighting effects such as:
  • Sunrise
  • Sunset
  • Lightning
  • Other available effects
• Demo Mode: Preview various lighting effects and settings without affecting your aquarium lights.
• Mode Switch (Physical Button): Double-press the physical button on the controller to cycle through different operating modes (e.g., Auto, Manual).

6. Maintenance

• Cleaning: Gently wipe the controller with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
• Placement: Ensure the controller is placed in a dry area, away from direct water splashes or excessive humidity.
• Firmware Updates: Periodically check the iMicMol app for any available firmware updates for your controller to ensure optimal performance and access to new features.

7. Troubleshooting

• Controller Not Pairing:
  • Ensure the indicator light is flashing slowly (waiting for pairing).
  • Verify your mobile device's Wi-Fi/Bluetooth is enabled and close to the controller.
  • Check that the Wi-Fi password entered is correct.
  • Try restarting both the controller and your mobile device.
• Controller Offline (Wi-Fi Model):
  • Check your home Wi-Fi network connection.
  • Ensure the controller's indicator light is solid white (paired and online). If not, try re-pairing.
  • Move the controller closer to your Wi-Fi router.
• Lights Not Responding:
  • Verify the controller is properly connected to your LED light fixture.
  • Check power connections to both the controller and the light.
  • Ensure the app shows the controller as "ON" and connected.
• Factory Reset: If experiencing persistent issues, perform a factory reset by holding the physical button on the controller for 3 seconds. This will clear all settings and require re-pairing. The indicator light will flash alternately during this process.

8. User Tips

• Check Connector Type: Before purchasing or connecting, confirm whether your LED light fixture requires a 5-pin or USB-C interface for the controller.
• Keep App Updated: Regularly update the iMicMol app to benefit from new features, bug fixes, and improved stability.
• Stable Wi-Fi/Bluetooth: For the best experience, ensure a stable Wi-Fi network for the Wi-Fi controller or a clear line of sight for the Bluetooth controller.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Micmol website or contact your retailer. Keep your proof of purchase for warranty claims.