1. Product Overview
The INMAS GT100-2.4G is a versatile wireless gaming headset designed for an immersive audio experience across multiple platforms. It features 2.4G wireless technology for ultra-low latency gaming, Bluetooth 5.4 for stable connections, and a wired Type-C option. The headset boasts a lightweight design, a hidden microphone, and intuitive physical controls.
Package Contents:
- 1 x GT100-2.4G Wireless Gaming Headset
- 1 x 2.4GHz Receiver (USB-A)
- 1 x Type-C to 3.5mm Audio Cable
- 1 x Type-C to USB Charging Cable
- 1 x User Manual

2. Setup and Connection
The GT100-2.4G headset offers three primary connection modes: 2.4GHz wireless, Bluetooth 5.4, and wired Type-C.
2.1 2.4GHz Wireless Connection (Low Latency Gaming)
This mode is ideal for gaming on PCs, laptops, PS4/PS5, and Nintendo Switch, offering ultra-low latency for a seamless experience.
- Insert the 2.4GHz Receiver: Plug the 2.4GHz USB receiver into an available USB-A port on your device (PC, laptop, PS4/PS5, Nintendo Switch dock). If your device only has Type-C ports, use a Type-C to USB-A adapter (not included) or the provided Type-C to USB charging cable with an appropriate adapter.
- Power On Headset: Press and hold the Power On/Off button on the headset until the indicator lights illuminate.
- Automatic Pairing: The headset should automatically pair with the 2.4GHz receiver. A successful connection is usually indicated by a solid light on the headset or receiver.

2.2 Bluetooth 5.4 Connection (Mobile Devices)
Use Bluetooth for connecting to mobile phones, iPads, and other Bluetooth-enabled devices.
- Power On Headset: Press and hold the Power On/Off button.
- Enter Bluetooth Pairing Mode: Press the 'Bluetooth/2.4G mode interchange' button (M button) to switch to Bluetooth mode. The headset indicator light will typically flash to indicate pairing mode.
- Enable Bluetooth on Device: On your mobile phone or iPad, go to Bluetooth settings and search for available devices.
- Select 'GT100-2.4G': Choose 'GT100-2.4G' from the list of found devices to pair.
- Confirm Connection: The headset will indicate a successful connection, and the indicator light will become solid.
2.3 Wired Type-C Connection
For devices with a 3.5mm audio jack or when battery is low, use the wired connection.
- Connect Audio Cable: Plug the Type-C end of the Type-C to 3.5mm audio cable into the headset's Type-C port.
- Connect to Device: Plug the 3.5mm end into the audio jack of your device (e.g., mobile phone, laptop).
- No Power Required: The headset can be used in wired mode even without battery power.

3. Operating Instructions
3.1 Physical Button Controls
The headset features intuitive buttons on the earmuffs for easy control.

- ⊕ Next song, volume+: Short press for next song, long press to increase volume.
- ⊝ Previous song, volume-: Short press for previous song, long press to decrease volume.
- Ⓜ Microphone switch: Press to toggle microphone on/off.
- Ⓜ Bluetooth/2.4G mode interchange: Press to switch between 2.4G wireless and Bluetooth modes.
- ◐ Power on/off: Long press to power the headset on or off.
- ◐ Answer/hang up the phone: Short press to answer or end a call.
- ◐ Music playback/music pause: Short press to play or pause music.
- ◐ Activate SIR/AI Intelligence: Long press to activate voice assistant (Siri, Google Assistant, etc.).
- ◐ Light switching: Press to cycle through or turn off RGB lighting effects.
3.2 Microphone Usage
The headset features a hidden, scalable microphone for clear communication.

- Adjusting the Microphone: Gently pull out the microphone from its hidden slot and position it closer to your mouth for optimal voice pickup.
- Muting the Microphone: Use the dedicated 'Microphone switch' button on the headset to quickly mute or unmute your voice.
- Retracting the Microphone: Push the microphone back into its slot when not in use for a sleek appearance.
3.3 Charging the Headset
The headset is equipped with a 500mAh battery.
- Connect Charging Cable: Use the provided Type-C to USB charging cable. Plug the Type-C end into the headset's charging port and the USB-A end into a 5V USB power source (e.g., computer USB port, wall adapter).
- Charging Indicator: The headset will display an indicator light (usually red) while charging, which will change (e.g., turn off or turn blue) when fully charged.
- Charging Time: Approximately 2 hours for a full charge.
- Battery Life: Up to 16 hours with lights on, or up to 25 hours with lights off (at 70% volume level).
4. Maintenance and Care
- Cleaning: Use a soft, dry cloth to wipe the headset. For earcups, a slightly damp cloth can be used, but ensure no moisture enters the speaker grilles. Avoid harsh chemicals or abrasive cleaners.
- Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
- Water Resistance: The headset is waterproof, but avoid submerging it in water or exposing it to heavy rain for extended periods.
- Cable Care: Handle cables gently. Avoid sharp bends or pulling on the cables to prevent damage.
5. Troubleshooting
5.1 No Sound or Intermittent Audio
- Check Connection: Ensure the headset is properly connected in the chosen mode (2.4G receiver fully inserted, Bluetooth paired, or Type-C audio cable securely plugged in).
- Volume Levels: Verify that the headset volume and the device volume are turned up.
- Mode Selection: If using 2.4G or Bluetooth, ensure the headset is in the correct mode using the 'Bluetooth/2.4G mode interchange' button.
- Device Output: On your computer, check that the GT100-2.4G is selected as the audio output device in sound settings.
- Re-pair/Re-connect: For wireless connections, try disconnecting and re-pairing/reconnecting the headset.
5.2 Microphone Not Working
- Microphone Switch: Ensure the microphone is not muted using the 'Microphone switch' button on the headset.
- Microphone Position: Make sure the hidden microphone is extended and positioned correctly.
- Device Input: On your device, check that the GT100-2.4G is selected as the audio input device in sound settings.
- Application Settings: Verify microphone settings within the specific application (e.g., game, communication software).
5.3 Headset Not Charging
- Cable Check: Ensure the Type-C charging cable is not damaged and is securely connected to both the headset and the power source.
- Power Source: Try a different USB power source or wall adapter.
- Charging Port: Check the headset's charging port for any debris that might obstruct the connection.
6. Specifications

| Feature | Specification |
|---|---|
| Model | GT100-2.4G |
| Brand Name | INMAS |
| Wireless Version | V5.4 |
| Connection Range | ≥10m |
| Battery Capacity | 500mAh |
| Play/Call Time (Lights Off) | Up to 25 hours (at 70% volume) |
| Play/Call Time (Lights On) | Up to 16 hours (at 70% volume) |
| Charging Time | Approximately 2 hours |
| Horn Specifications | 40mm |
| Charging Voltage | 5V |
| Charging Interface | Type-C |
| Weight | 222g |
| Material | PVC, ABS, Silica Gel |
| Frequency Response Range | 20 - 20000Hz |
| Sensitivity | 30dB |
| Impedance Range | Up to 32 Ω |
| Earcups Type | Sealed |
| Number of Drivers | 2 |
| Vocalism Principle | Dynamic |
| Features | Waterproof, With microphone, Amazon Alexa Support, Apple Siri Support, Detachable Cable, Playback Control |
| Active Noise-Cancellation | No |
| Support APP | No |
| Support Memory Card | No |
7. User Tips
- Optimal Gaming Experience: For the best gaming performance with minimal latency, always prioritize the 2.4GHz wireless connection over Bluetooth.
- Battery Management: To maximize battery life, consider turning off the RGB lighting when not needed, especially during long gaming sessions or calls.
- Comfort Adjustment: Take advantage of the scalable headband to find the most comfortable fit for extended wear.
- Microphone Clarity: Ensure the microphone is extended and positioned correctly for clear voice communication. Mute it when not speaking to avoid transmitting background noise.
- Multi-Platform Use: Remember the headset's multi-platform compatibility. Easily switch between your gaming console (2.4G), phone (Bluetooth), or PC (2.4G/wired) as needed.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase for warranty claims.