FLYLINKTECH 2000A Car Jump Starter CF200

1. Introduction

Thank you for choosing the FLYLINKTECH 2000A Car Jump Starter. This portable device is designed to jump-start 12V vehicles with dead batteries, and also functions as a powerful 13200mAh power bank and an emergency LED flashlight. Please read this manual carefully before use to ensure safe and optimal performance.

2. Safety Information

Always observe the following safety precautions when using the jump starter:

• Read all instructions before use.
• Do not immerse the unit in water.
• Do not operate the unit if it has been dropped or damaged.
• Keep out of reach of children.
• Ensure proper polarity connection (red clamp to positive, black clamp to negative) to avoid sparks or damage.
• Do not jump-start vehicles with engine displacements exceeding the specified limits (6.0L Gas, 5.0L Diesel).
• Do not short-circuit the clamps.
• Store in a cool, dry place away from direct sunlight and high temperatures.

3. Package Contents

Please check the package for the following items:

• FLYLINKTECH 2000A Car Jump Starter Unit
• Smart Jumper Clamps (Red for Positive, Black for Negative)
• USB Charging Cable
• User Manual

4. Product Overview

The FLYLINKTECH CF200 features a robust design with multiple functionalities:

• Jump Start Port: For connecting the smart jumper clamps.
• USB Output Port (5V/2.1A): For charging mobile devices.
• Charging Input Port: For recharging the jump starter unit.
• LED Indicator Lights: Show battery level and charging status.
• Power Button: To turn the unit on/off and cycle through LED modes.
• Built-in LED Flashlight: With Flashlight, SOS, and Strobe modes.

5. Specifications

6. Setup and Initial Charging

Before first use, fully charge the jump starter unit.

1. Connect the provided USB charging cable to the jump starter's input port.
2. Connect the other end of the USB cable to a compatible USB wall adapter (not included) or a powered USB port.
3. The LED indicator lights will illuminate to show the charging progress. All lights will be solid when fully charged.
4. Charging time may vary depending on the power source.

7. Operating Instructions

7.1. Jump Starting a Vehicle

Ensure the jump starter is at least 50% charged before attempting to jump-start a vehicle.

1. Connect Clamps to Jump Starter: Insert the blue plug of the smart jumper clamps into the jump start port on the unit. Ensure a secure connection.
2. Connect Clamps to Car Battery: Attach the red (positive, +) clamp to the positive terminal of the car battery and the black (negative, -) clamp to the negative terminal of the car battery.
3. Start the Vehicle: Once the clamps are securely connected, start your vehicle's engine.
4. Remove Clamps: After the engine starts, immediately remove the clamps from the car battery, then disconnect the clamps from the jump starter unit.

7.2. Using as a Portable Power Bank

The jump starter can charge various electronic devices via its USB output port.

1. Connect your device's USB charging cable to the jump starter's USB output port (5V/2.1A).
2. The jump starter will automatically begin charging your device.
3. Monitor your device's charging status.

7.3. Using the LED Flashlight

The built-in LED flashlight has three modes: Flashlight, SOS, and Strobe.

1. Press and hold the Power Button for 3 seconds to turn on the flashlight.
2. Press the Power Button briefly to cycle through the modes: Flashlight > SOS > Strobe.
3. Press and hold the Power Button again for 3 seconds to turn off the flashlight.

8. Maintenance

• Recharging: To maintain battery health, recharge your jump starter at least once every 3 months, even if not in use. This ensures it's ready when you need it.
• Cleaning: Wipe the unit with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the jump starter in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.

9. Troubleshooting

• Unit does not turn on: Ensure the unit is charged. If not, recharge it fully.
• Vehicle does not start:
  • Check that the clamps are securely connected to the correct battery terminals (red to positive, black to negative).
  • Ensure the jump starter has sufficient charge (at least 50%).
  • Verify that your vehicle's engine displacement is within the supported limits.
  • The car battery might be severely damaged; seek professional assistance.
• Smart clamps indicator light is red/flashing: This indicates a protection mode (e.g., reverse polarity, short circuit). Disconnect the clamps, check connections, and try again. Refer to the smart clamp's specific indicator guide if available.
• Device not charging from USB port: Ensure the jump starter is powered on and has sufficient battery charge. Check the USB cable and device connection.

10. User Tips

• Charger Compatibility: When recharging the jump starter, use a standard 5V USB wall charger. The wattage of the charger should be sufficient to provide a stable charge (e.g., 10W or higher is generally recommended for faster charging).
• Cold Weather Performance: In extremely cold conditions, store the jump starter indoors until ready for use to maximize its starting power.
• Emergency Kit Essential: Keep your jump starter fully charged and stored in your vehicle's emergency kit for unexpected situations.

11. Warranty and Support

FLYLINKTECH products are designed for reliability and performance. This product comes with a one-year warranty from the date of purchase, covering manufacturing defects. For warranty claims or technical support, please contact your retailer or the manufacturer directly with your purchase details.

Please retain your proof of purchase for warranty purposes.