Estepon W4Pro Electric Scooter User Manual

1. Important Safety Information

WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

• Always wear a helmet and other protective gear (knee pads, elbow pads) when riding.
• Do not ride in wet conditions, heavy rain, or through puddles.
• Avoid riding on uneven surfaces, gravel, or slippery roads.
• Ensure the scooter is fully charged before each use.
• Do not modify the scooter in any way.
• Observe local traffic laws and regulations.
• Maximum load capacity is 120 kg. Do not exceed this limit.
• This scooter is designed for individuals aged 16 and above.

2. Product Overview

The Estepon W4Pro is a lightweight, portable, and foldable electric scooter designed for adult use. It features an 8.5-inch solid tire system, a powerful 350W motor, and a 36V10Ah battery, offering a balance of performance and convenience. The scooter can be controlled via a smart app, allowing for adjustable speed modes and cruise control.

Figure 1: Estepon W4Pro Electric Scooter with key specifications (36V10Ah, 22-30km range, 25km/h max speed, 350W motor).

3. Package Contents

Please check the contents of your package carefully. If any items are missing or damaged, please contact customer support.

• Estepon W4Pro Electric Scooter
• Power Adapter/Charger
• User Manual
• Assembly Tools (if required)

4. Setup and Assembly

4.1 Unfolding the Scooter

1. Place the scooter on a flat surface.
2. Locate the folding mechanism near the base of the handlebar stem.
3. Release the locking latch and carefully lift the handlebar stem until it clicks into place in the upright position.
4. Ensure the locking mechanism is securely engaged before riding.

4.2 Initial Charging

Before first use, fully charge the scooter's battery. The charging time is approximately 6-8 hours.

1. Locate the charging port, usually on the side of the deck.
2. Connect the power adapter to the charging port, then plug the adapter into a power outlet.
3. The indicator light on the charger will typically turn red during charging and green when fully charged.
4. Disconnect the charger once charging is complete.

4.3 App Connection

The W4Pro features smart app control for enhanced functionality.

1. Download the official Estepon scooter app from your smartphone's app store.
2. Turn on the scooter.
3. Open the app and follow the on-screen instructions to pair your scooter via Bluetooth.
4. The app allows for real-time battery display, speed mode adjustment, and cruise control activation.

Figure 2: Scooter with smartphone displaying the control app interface.

5. Operating Instructions

5.1 Power On/Off

• To power on: Press and hold the power button on the handlebar until the display lights up.
• To power off: Press and hold the power button until the display turns off.

5.2 Riding Modes

The scooter offers three adjustable speed modes, controllable via the app or the scooter's display:

• ECO Mode: 0-10 km/h (Energy-saving, suitable for beginners or crowded areas)
• D Mode: 10-15 km/h (Standard driving mode)
• S Mode: 15-30 km/h (Sport mode, for maximum speed and performance)

Figure 3: Handlebar display and smartphone app showing three-speed modes.

5.3 Riding the Scooter

1. Place one foot firmly on the deck and push off with the other foot to gain initial momentum.
2. Once moving, gently press the accelerator lever to engage the motor.
3. Place your other foot on the deck.
4. To slow down, release the accelerator. To brake, use the brake lever on the handlebar.

5.4 Braking System

The W4Pro is equipped with front drive and rear disc brakes for reliable stopping power.

Figure 4: Close-up of the rear disc brake system.

5.5 Headlights

Activate the 3W strong headlights for improved visibility during night riding or in low-light conditions.

Figure 5: Illustration of the 3W strong headlights in action.

6. Maintenance

6.1 Battery Care

• Charge the battery regularly, even if the scooter is not in use, to maintain battery health.
• Avoid completely draining the battery before recharging.
• Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures.
• The 10Ah Grade A battery is designed for approximately 800 charging cycles.

Figure 6: Internal view of the 10Ah Grade A battery pack.

6.2 Tire Maintenance

The W4Pro uses 8.5-inch honeycomb solid tires, which require minimal maintenance compared to pneumatic tires.

• Regularly inspect tires for wear and tear or damage.
• Clean tires to remove dirt and debris that could affect grip.

Figure 7: Close-up of the 8.5-inch honeycomb tire.

6.3 General Cleaning

• Wipe down the scooter with a damp cloth after use.
• Avoid using high-pressure water jets or harsh chemicals, which can damage electronic components.

6.4 Folding and Storage

The scooter's foldable design makes it easy to store and transport.

1. Ensure the scooter is powered off.
2. Release the folding mechanism latch.
3. Carefully fold the handlebar stem down until it locks into place.
4. The folded scooter can be easily carried or stored in compact spaces like a car trunk or office.

Figure 8: Folded scooter demonstrating portability.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.

If you encounter any problems with your product, please contact customer service online for assistance.