1. Safety Information
During the cycling process, comprehensive safety measures should be taken, and risk awareness and good judgment should be maintained at all times to avoid injuries as much as possible.
General Safety Guidelines:
- The user must be an adult.
- The responsibility for iENYRID maintenance is yours! Proper and frequent maintenance will reduce risks of injuries.
- Please wear a helmet, protective gear, and other safety measures when riding.
- Always follow local laws and regulations.
- Do not perform stunts, spins or jumps; if you insist on doing these dangerous actions, please take full protective measures.
- Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
- While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
Mechanical Safety Check:
Before using the iENYRID Scooter, always perform the following checks:
- Always perform a visual inspection to ensure all screws and nuts are tight and in place. If anything is amiss or missing and you are unsure, please contact the seller to confirm safety before use.
- Check the tires and wheels to ensure they are not showing signs of wear and tear. Always ensure the brake mechanism is not touching the wheels and allows free spinning.
- Perform mechanical checks of brakes and other parts of the scooter that contribute to visibility, safety, and functionality.
Tire Air Pressure:
The tire is pressurized to the standard value indicated on the tire itself.
2. Product Overview
The iENYRID iE-S1 Electric Scooter is designed for adult use, featuring an 800W motor, 48V15AH battery, and 10-inch off-road tires. It includes an automatic cruise control system and a smart LCD display.

Components Display:

The scooter features a smart LCD display that shows cruise control status, battery life, speed mode, real-time speed, mileage, and a coded lock indicator.
Handlebar Controls:
- Rear brake lever
- Horn
- Headlight switch
- Power on button
- Upshift key
- Downshift key
- Turn signal switch
- Menu button
- Gear
- Mileage
- Gear number
- Battery display
- Voltage display
- Real time speed
- Fault code display
- Accelerator
- Front brake lever

The handlebar height can be adjusted to suit your preference.
3. Specifications
| Feature | Specification |
|---|---|
| Model | iE-S1 |
| Tire Size | 10 inch |
| Battery | 48V/15Ah |
| Tyre Type | Air tires |
| Power (W) | 800W (501-1000W category) |
| Charging Time | 6-8 hours |
| Display Screen | Color |
| Frame Material | Aluminum alloy |
| Max Speed | 45 KM/H (default 25 KM/H, unlockable) |
| Net Weight | 25.7KG |
| Range Per Charge | 30-40KM |
| Gross Weight | 29.5KG |
| Max Load | 120KG |
| Package Size | 128*24*48cm |
| Brake | Front and rear disc brake |
| Light | Front LED headlights, side lights and tail lights |
| Adapter Output | 54.6V 2A |
| Folded | Yes |
| Category | Two-wheel Scooter |
| Applicable People | Unisex |
| Certification | CE |
Note: The range is tested with an 80kg rider on a flat road at 30-40km. Actual range may vary based on rider weight, riding conditions, and temperature. For riders over 80kg, rough road conditions, or low temperatures, the range will be shortened.

4. Assembly and Installation
Follow these steps to assemble your iENYRID iE-S1 Electric Scooter:
- Remove the scooter from the packaging box.
- Unscrew the screws at the foot support installation location.
- Align the screw holes and insert the screws.
- Tighten the screw firmly.
- Press down on the folding lever and lift up the upright lever.
- After the pole is fully extended, snap the safety buckle into place.
- Remove the upright screw and cover plate.
- Place the handle into the upright pole.
- After adjusting the angle of the handle, tighten the fixing screws.
- Place the pole cover and screws into the pole and tighten the screws.
- Remove the instrument bracket from the bag and install the rubber pad.
- Place the rubber pad into the bracket of the instrument panel.
- Fix the instrument panel in the middle position of the handle and tighten the screws.
- Match the plug color and firmly insert it in the direction indicated by the arrow.
- Adjust the installation angle of the brake lever, button, and dashboard on the handlebars and tighten the screws.
- While pressing the limit button, pull the pole upwards until it reaches the appropriate position.
- Lock the upright pole buckle.
- Assembly completed.

For a visual guide, you can refer to the online installation video: https://www.youtube.com/watch?v=T3Lhn7-N1B4
5. Folding and Unfolding
The iENYRID iE-S1 Electric Scooter features a convenient folding mechanism for portability.
To Fold the Scooter:
- Release the buckle of the pole.
- Press down on the pole while pressing the limit point.
- Pull the safety lever backwards.
- Pull the folding lever backwards.
- Press down on the upright pole until you hear a clicking sound.
- Folding completed.

The scooter weighs 25.7KG (56 LBS) and is foldable for easy carrying, making it a perfect companion for travel and entertainment, fitting into car trunks, subways, or buses.
Video 5.1: Product demonstration including unfolding and riding features.
6. Power On and Unlock
To power on and unlock your scooter:
- Long press the power button to enter the password input interface.
- Press the power button three times to enter the three zero password (000).
- Quickly press the power button twice to unlock it.
The unlocking process takes a short time. It is normal for the screen to turn off if not unlocked within the specified time, as this is a security feature to prevent theft. If you forget your password, please refer to the manual or contact support.
After unlocking, always wear a helmet and protective gear before cycling, and ensure all functions of the scooter are normal before starting your ride.
7. Operating Instructions
Riding Safety:
- Put one foot on the board and the other on the ground.
- Press the accelerator lever slightly, and the scooter will accelerate. Place both feet on the board after you can keep balance. Press down the lever to speed the scooter up.
- Release the accelerator to slow down. Squeeze the brake lever at the left handlebar to stop the scooter.
- Tilt your body slightly to the side you want to turn, and slowly turn the handlebars.
- Do not ride in the rain.
- Slow down before speed bumps, potholes, and other uneven surfaces. Bend your knees to steady yourself on complex roads.
- Do not accelerate downhill.
- Do not hang heavy objects such as backpacks on the handlebars.
- Do not press the accelerator when you walk on foot.
- Do not ride on roadways.
- Do not turn suddenly at high speed.
- No riding in water above 2cm.
- No riding with another person or a child.
- Do not step on the fender.
- Do not touch the disk brake after frequent braking, as it will be very hot!
- Do not release the handlebars while riding!
- No riding upstairs or downstairs!
Speed Modes:
The scooter offers three speed modes:
- Model 1: 15 km/h
- Model 2: 30 km/h
- Model 3: 45 km/h

Automatic Cruise Control System:
Activate the Constant Speed function so that your attention is focused on the road ahead and you are no longer distracted by accelerating on the gas pedal.

Lighting System:
The scooter is equipped with a comprehensive lighting system for visibility and safety:
- Headlight
- Side Lights
- Left/Right Turn Signal
- Taillight

Braking System:
The iE-S1 features an outstanding dual-disc braking system, providing a braking distance of 20M/S and a lifespan of up to 3000 hours.

Suspension:
The scooter is equipped with front and rear hydraulic spring dampers for a smooth ride.

Tires:
The iE-S1 features 10-inch air off-road tires, suitable for various terrains.

8. Battery and Charging
Battery Warnings:
- Do not charge indoors.
- Do not turn on and operate the scooter while charging.
- Keep the battery away from children, pets, or direct heat.
- Do not expose the battery to high temperature and pressure.
- Please use the charger included with the scooter for charging.
- Do not throw away batteries at will to avoid polluting the environment.
- Do not store the scooter over a long period of time with an almost empty battery.
- From time to time, discharge the battery by riding. Recharge the battery again and make sure not to leave the battery fully empty.
Do not charge if the scooter has the following conditions:
- The battery leaks.
- The battery is damaged.
- The battery heats up or is deformed.
- The bottom or overall of the deck overheats.
The use, storage, or charging of the battery outside specified limits may result in the annulment of the warranty, battery damage, and ineffective battery charging.

First Charge:
It is important to fully charge the battery before your first use of the scooter.
Your scooter's battery comes with these built-in features:
- Balanced charging protection: During charging, the battery automatically balances the voltage among the internal cells to protect each cell.
- Over-charging protection: The battery stops charging automatically when full to protect against damage.
- Over current protection: The battery automatically stops charging if the voltage is higher than prescribed voltage to protect the battery.
- Over discharging protection: The battery automatically stops discharging when its voltage drops below the undervoltage value to protect the battery.
- Short-circuit protection: The battery automatically stops output in the case of a short-circuit.
How to Charge:
- Do not charge indoors.
- Ensure the scooter is TURNED OFF. Connect the external power charger to the scooter.
- Connect the charger to an electrical outlet, then turn on the power of the electrical outlet.
- Do not charge the batteries in temperatures below 5 °C or above 40 °C. The battery may stop the charging process in extreme temperatures.
- The charger light will be RED when the battery is charging. The charger light will turn GREEN when the battery is fully charged.
- After the battery is fully charged, please unplug the charger in time.
9. Troubleshooting (Error Codes)
If your scooter experiences an issue, an error code may be displayed. Refer to the table below for common error codes and their solutions:
| Error Code | Fault | Diagnostic Step | Solution |
|---|---|---|---|
| 3E | Phase fault | Check whether the motor wires are connected properly or whether the colored wires are connected incorrectly. | If there is no problem with each circuit, the motor needs to be replaced. |
| 4E | Low voltage protection | Check if the battery is used up. | The battery is dead and needs to be charged. |
| 5E | Brake lever failure | After the system is powered on, check whether the brakes are working properly. | If the brake signal is less than 0.75V for a long period of time, the brake lever needs to be replaced. |
| 6E | Motor Hall failure | Check whether the motor wires are connected properly or whether the colored wires are connected incorrectly. | If there is no problem with each circuit, the motor needs to be replaced. |
| 8E | Accelerator failure | Check if the accelerator is reset. | After the accelerator is reset, if the handlebar signal is still less than 0.75V, the accelerator needs to be replaced. |
| 88 | Controller failure | Controller failure | Replace controller. |
| 10E | Communication failure | The controller cannot receive the instrument signal. Check whether the yellow line of the controller is connected properly. | Replace meter. |
| 15E | Communication fail | The instrument cannot receive the signal from the controller. Check whether the green line of the controller is connected properly. | Replace controller. |
10. Maintenance
Regular maintenance is crucial for the longevity and safe operation of your iENYRID iE-S1 Electric Scooter. The responsibility for maintenance rests with the user.
- Regular Inspections: Always perform a visual inspection of all screws and nuts to ensure they are tight and in place before each ride.
- Tire and Wheel Checks: Regularly check the tires and wheels for signs of wear and tear. Ensure the brake mechanism is not touching the wheels and allows them to spin freely.
- Brake System: Perform mechanical checks of the brakes to ensure they are fully functional and responsive.
- Battery Care: Follow the charging guidelines strictly. Avoid leaving the battery fully discharged for extended periods. Periodically discharge the battery by riding and then fully recharge it.
- Cleaning: Keep the scooter clean. Avoid exposing it to excessive moisture or dampness, especially the electrical components.
- Storage: Store the scooter in a dry, temperate environment. Avoid prolonged exposure to direct sunlight or extreme temperatures, as this can accelerate aging and cause malfunctions.
- Professional Service: For complex issues or repairs, especially those related to the motor, controller, or battery, it is recommended to contact authorized service centers or the seller.
11. User Tips
- Speed Unlocking: The default speed of the scooter is factory-set to 25 km/h. For instructions on unlocking the maximum speed, please contact online customer service for a video guide.
- Regular Checks: Perform frequent visual inspections of all components, especially screws, nuts, and brake mechanisms, to catch potential issues early and ensure safe operation.
- Contact Support Early: If you encounter any problems with your product, do not hesitate to contact customer service immediately. They can provide quick assistance and help resolve issues.
- Unboxing Video: It is highly recommended to take an unboxing video when disassembling the parcel. This can help protect your rights and interests in case of any discrepancies or damage.
12. Warranty and Support
By using this product, you agree to the limited warranty terms. Please read the limited warranty carefully.
Warranty Exclusions:
Faults caused by any of the following are not within the scope of warranty:
- Failure to maintain according to this user manual.
- Product damage or defects caused by improper driver operation.
- Damage caused by misuse, traffic accident, or accidental collision.
- Damage caused by riding on abnormal roads or accidental collision.
- Damage of the vehicle caused by natural disaster or irresistible force.
- Products which have had their serial numbers removed or tampered with.
- Defects or malfunctions of the product not notified by the customer during the Warranty Period.
- Products used for commercial purposes including but not limited to leasing/hiring, use in competitions etc.
- Performing high-risk actions such as stunts, spinning, or jumping leading to rapid aging or malfunction of the product.
- Exposure of this product to blazing sun or outdoors for a long time, as that will speed up the aging process of the product and cause malfunction.
- Defects or damages from improper storage, exposure to moisture or dampness, modifications, connections, repairs (except as carried out by iENYRID or its authorized centers), misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of iENYRID, including damage caused by dropping, blown fuses, liquid entering the interior of the product.
Contact Information:
For after-sales support, questions, or concerns, please use the following contact details:
- Company: Shenzhen Tianshengle Technology Co., Ltd.
- Address: Room 502, 5th Floor, Building 1, Liuwei Business Center, No.5, Longjing Community, Yangmei Community, Bantian Street, Longgang District, Shenzhen, China
- WhatsApp: +8613612953725
- Customer Support Email: support@ienyrid.com
- Official Website: www.ienyrid.com
- Facebook: https://www.facebook.com/iENYRID
- YouTube: https://www.youtube.com/@iENYRID
You can also find related video installation tutorials and after-sales parts replacement videos on the official website and YouTube channel.
A detailed user manual in PDF format is available for download: User Manual (PDF)