Introduction
Thank you for purchasing the ETENWOLF AIR 3 tiny pump. This manual provides detailed instructions for the safe and efficient use of your device. Please read all instructions and safety warnings carefully before use to ensure maximum performance and security. If you have any questions or require support, please contact us at support@etenwolf.com or call +1 (877)-838-0209 (Mon-Fri 8 am-5 pm PST).
A digital version of this user manual (V2.0) is available for download: User Manual (PDF)
Package Contents
Please check the box for the following items:
- 1 x ETENWOLF AIR 3 Outdoor Inflation Pump
- 1 x USB-A to USB-C Charging Cable
- 5 x Gas Nozzles (various sizes)
- 1 x Storage Bag
- 1 x User Manual (this document)

Product Overview
The ETENWOLF AIR 3 is a compact and powerful electric air pump designed for various outdoor and indoor inflation/deflation needs. It features a built-in camping light and a long-lasting battery.

- Hanging ring
- Deflation port
- Start/pause power button
- Battery indicator
- Light button
- Type-C Charging port
- Camping light
- Inflation port
Setup
Battery Charging
Before first use, or when the battery indicator shows low charge, fully charge the device. Use a certified charger that provides a voltage of 5V and a maximum charging current of 3A (5V/3A). The charging time is approximately 1.5 hours for a full charge.
- Battery Indicator (Not Charging):
- 0-10% orange flashing
- 10%-30% orange
- 30%-100% white
- Battery Indicator (While Charging):
- 0-99% white flashing
- 100% full charged white
Please charge the device once every six months to maintain optimal battery performance, especially during long periods of non-use.
Operating Instructions
Inflation
- Attach the appropriate nozzle clockwise onto the inflation port (8).
- Long-press the Start/pause power button (3) for 2 seconds to activate the pump.
- Connect the nozzle to the object to be inflated.
- Press the Start/pause power button (3) to begin inflation.
- Press the Start/pause power button (3) again to stop inflation.

Deflation
- Attach the appropriate nozzle clockwise onto the deflation port (2).
- Long-press the Start/pause power button (3) for 2 seconds to activate the pump.
- Connect the nozzle to the object to be deflated.
- Press the Start/pause power button (3) to begin deflation.
- Press the Start/pause power button (3) again to stop deflation.
Note: The air pump requires manual stopping; it will not stop automatically. Always check the allowable pressure of the item before use. Overinflating may cause damage or explosion.
Adjusting Airflow Speed
- Long-press the power button for 2 seconds to turn on the device.
- Press the power button once to initiate high-speed operation.
- Within the first 5 seconds of high-speed operation, press the power button a second time to switch to low-speed operation.
- Press the power button a third time to stop the operation.
- If the high-speed fan has been operating for more than 5 seconds, pressing the power button will stop the operation immediately.
Camping Light Operation
The AIR 3 features a multi-mode camping light:
- Press the Light button (5) to turn on the light when the pump is activated.
- Each subsequent press cycles through the light modes:
- Level 1: 60 lumens (approx. 40 hours duration on full charge)
- Level 2: 200 lumens (approx. 10 hours duration on full charge)
- Level 3: 600 lumens (approx. 3 hours duration on full charge)
- Strobe light
- SOS signal
- To turn off the light in any active light mode, press and hold the Light button (5) for 2 seconds.

Nozzle Compatibility
The AIR 3 comes with 5 different nozzles to accommodate a wide range of inflatables:
- Air Mattress / Floating bed / Air pillow
- Vacuum storage bag
- Swimming ring / Inflatable toy
- Camping sleeping pad
- Inflatable swimming pool

Specifications
| Feature | Specification (AIR 3 pump) |
|---|---|
| Dimensions | 1.8 inches x 1.9 inches x 2.3 inches (approx. 4.8cm x 4.8cm x 6cm) |
| Item Weight | 145g |
| Max Output Pressure | 0.65 PSI (4.5 kPa) |
| Airflow Rate (High Speed) | 13 CFM (Cubic Feet Per Minute) / 360 LM (Liters per Minute) |
| Airflow Rate (Low Speed) | 8 CFM (Cubic Feet Per Minute) / 225 LM (Liters per Minute) |
| Peak Power | 8W |
| Battery Capacity | 2600mAh x 3.7V (9.6Wh) |
| Charging | USB-C 10W Fast Charging |
| Charging Time | Approx. 1.5 hours (with 5V/2A charger) |
| Operating Temperature | -20°C to 70°C (-4°F to 158°F) |
| Charging Temperature | 0°C to 45°C (30°F to 113°F) |
| Storage Temperature | -20°C to 55°C (-4°F to 131°F) |
| Light Brightness & Duration | 60 lumens (40 hours), 200 lumens (10 hours), 600 lumens (3 hours) |
| Material | Plastic |

Safety Instructions
Warning! Please read all safety warnings and instructions to reduce the risk of electric shock, fire, and/or serious injury.
- Red flashing light: Indicates high temperature warning or overload. Check for vent blockage if this occurs.
- Use only a compatible charger (5V/3A) to avoid charging issues.
- This device is intended for adult use only.
- Do not drop the unit into water or expose it to rain or excessive moisture. This product is not waterproof.
- Do not obstruct the vent holes or any open sources on the device.
- Never insert objects into the inflation or deflation connectors.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure they do not play with the appliance.
Maintenance
- Battery Care: To maintain battery performance, charge the device at least once every six months, even if not in use.
- Cleaning: Wipe the exterior of the pump with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the pump and its accessories in the provided storage bag in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
- Pump not turning on: Ensure the battery is charged. Long-press the power button for 2 seconds to activate.
- Red flashing light: This indicates high temperature or overload. Turn off the pump, check if the vents are blocked, and allow it to cool down before resuming operation.
- Slow inflation/deflation: Check that the correct nozzle is securely attached and that there are no leaks in the inflatable item. Ensure the pump is operating at high speed if needed.
- Unable to charge: Ensure you are using a compatible 5V/3A charger and a functional USB-C cable. Check the charging port for any debris.
User Tips
- The AIR 3 is highly effective for vacuum storage bags, quickly removing air to save space.
- The integrated camping light is practical and provides sufficient illumination for a small tent or campsite.
- The USB-C charging feature offers convenient and fast recharging.
- For larger inflatables like air mattresses or inflatable boats, the pump can inflate them quickly, often within a couple of minutes.
- Despite its small size, the pump is powerful and has a good battery life, allowing for multiple inflations on a single charge.
Warranty & Support
2-Year Coverage
ETENWOLF provides a 2-year warranty from the date of purchase. During this period, we offer timely and effective online after-sale service. We will repair or replace any defective product (due to manufacturing fault) within this warranty period.
Contact Information
- Website: www.etenwolf.com
- Email Support: support@etenwolf.com
- Facebook: www.facebook.com/etenwolf
- Phone Support: +1 (877)-838-0209 (Mon-Fri 8 am-5 pm PST)
Made in P.R.C
![]()