WIIYII F10

Contents

WIIYII F10 Car Universal HUD HD Screen Head Up Display User Manual

Model: F10

1. Introduction

Thank you for choosing the WIIYII F10 Car Universal HUD (Head Up Display). This device is designed to enhance your driving experience by projecting essential vehicle information directly into your line of sight, allowing you to monitor various parameters without diverting your attention from the road. Featuring an HD screen, multi-language support, and a dual OBD2+GPS system, the F10 offers comprehensive data display and intelligent warning functions for safer and more informed driving.

2. Package Contents

Please check the box for the following items:

  • WIIYII F10 HUD Unit
  • OBD Cable
  • Adhesive Pad for mounting
  • User Manual (this document)
WIIYII F10 HUD package contents including the HUD unit, OBD cable, and adhesive pad.
Figure 2.1: Contents of the WIIYII F10 HUD package.

3. Key Features

  • HD Display: Clear presentation of true colors for optimal readability.
  • OBD2+GPS Dual System: Compatible with a wide range of vehicles, offering both OBD2 data and GPS-based information.
  • Multi-language Function: Supports multiple languages for user convenience.
  • Multiple Display Interfaces: Cycle through various interfaces to view different combinations of data.
  • Comprehensive Data Monitoring: Displays speed, RPM, water temperature, oil temperature, oil pressure, voltage, turbine pressure, fuel consumption, mileage, clock, and vacuum ratio.
  • Intelligent Warning System: Includes speeding alarm, water temperature alarm, voltage alarm, and fatigue driving reminder.
  • Automatic Brightness Adjustment: Adapts to ambient light conditions for optimal visibility.
  • Intelligent Power Saving: Automatically switches on/off with the vehicle ignition.
  • Mile/MPH Switching: Easily switch between metric and imperial units.
Diagram illustrating the various intelligent functions of the F10 HUD, including speed, clock, RPM, voltage, water temperature, fuel consumption, mileage, oil temperature, turbine pressure, automatic sensitivity, mile/MPH switching, speeding alarm, water temperature alarm, voltage alarm, and fatigue driving reminder.
Figure 3.1: Overview of F10 HUD intelligent functions.

4. Installation

The WIIYII F10 HUD offers multiple installation methods to suit your preference:

  1. Dashboard Mounting: After tearing off the adhesive film on the bottom of the LCD meter, choose a suitable position on your dashboard to stick it. Ensure the surface is clean and dry for optimal adhesion.
  2. Windshield Projection (Inverted Display): For a head-up display experience, the unit can be placed on the dashboard and configured for inverted display mode, projecting information onto the windshield.

Ensure the device is placed in a position that does not obstruct your view of the road or interfere with vehicle controls.

Image showing various installation methods for the F10 HUD on a car dashboard, including direct placement and inverted display for windshield projection.
Figure 4.1: Multiple installation methods for the F10 HUD.

5. Operation

The F10 HUD is designed for intuitive operation with a few simple controls:

  • Interface Switching: Short press the 'up' button to cycle through the main display interfaces (Interface 1 to 5).
  • Clock Display: Short press the 'OK' button to display the clock interface.
  • Digital Interface Change: Short press the button (refer to device for exact button) to change the digital interface, displaying various instrument functions such as oil pressure, voltage, and turbine pressure. Note that some functions may only be supported by specific car models.
Diagram showing five different display interfaces (Interface 1-5) and a clock interface for the F10 HUD, illustrating how a short press of the up button cycles through interfaces 1-5 and a short press of the OK button displays the clock.
Figure 5.1: Multiple display interfaces and switching.
Diagram showing various digital instrument functions available on the F10 HUD, including speed, oil pressure, voltage, turbine pressure, oil temperature, water temperature, and vacuum ratio. It notes that these functions only support some cars.
Figure 5.2: Digital instrument functions.
High-definition display of the F10 HUD showing speed, RPM, turbine pressure, and water temperature in a clear, colorful format.
Figure 5.3: HD display of key driving parameters.

6. Specifications

AttributeValue
Brand NameWIIYII
Model NumberF10
TypeCombiner HUD, Diagnostic Tool, OBD2
PlacementOBD
Screen TypeLCD, TFT
UsageCar Safe Driving, Digital Speedometer
Car Model CompatibilityUniversal Car
ColorBlack
LanguageSupport Multi-language
DesignMirror
Warning FunctionsSpeed, Voltage, Water Temperature
QualityHigh Level
Product Dimensions (Facade)7.9cm (Height) x 6.5cm (Width)
Product Dimensions (Base Height)1.5cm
Package Weight1.0 kg
Package Dimensions21cm (Length) x 14cm (Width) x 11cm (Height)
Diagram showing the dimensions of the F10 HUD unit, with a facade height of 7.9cm, width of 6.5cm, and a base height of 1.5cm.
Figure 6.1: F10 HUD product dimensions.

7. Troubleshooting

The F10 HUD is designed to help you identify and address potential vehicle issues. Here are some common problems and how the HUD can assist:

  • Car Fault Alarm: The HUD can display general car fault alarms, prompting you to check your vehicle's diagnostic system.
  • High Water Temperature: Monitors engine water temperature and provides an alarm if it exceeds safe levels, preventing engine overheating.
  • Low Oil Pressure/Temperature: Displays oil pressure and temperature, alerting you to potential lubrication issues.
  • Voltage Issues: Monitors battery voltage and warns of low or high voltage conditions that could affect vehicle electronics.
  • Speeding: Provides a customizable speeding alarm to help you maintain safe driving speeds.
  • Fatigue Driving: Offers a reminder function to encourage breaks during long drives.
Image depicting various car problems like oil temperature, high water temperature, RPM box temperature, throttle position, multiple fuel consumption, turbo pressure, car fault alarm, air-fuel ratio, and engine load, which the F10 HUD helps monitor and prevent.
Figure 7.1: Common vehicle issues monitored by the F10 HUD.

8. User Tips

  • Optimal Placement: Experiment with different dashboard positions to find the best viewing angle that minimizes distraction and maximizes visibility.
  • Cable Management: Secure the OBD cable neatly to avoid interference with driving controls and maintain a clean interior.
  • Unit Switching: Utilize the one-key switch feature to quickly toggle between different display interfaces based on the information you need most at any given moment.
  • Language Settings: If the display language is not your preferred one, consult the full manual (if provided separately) or device settings for instructions on changing the language.

9. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the display screen and the unit's body. Avoid using abrasive cleaners or solvents that could damage the surface.
  • Storage: If storing the device for an extended period, disconnect it from the OBD port and store it in a cool, dry place away from direct sunlight.
  • Cable Care: Ensure the OBD cable is not kinked or pinched, as this can damage the wiring and affect performance.

10. Warranty and Support

The WIIYII F10 HUD comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the manufacturer's customer service. Refer to the product packaging or the seller's website for contact information.

11. Company Overview

WIIYII is a brand of Shenzhen Cheyang Technology Co. Ltd., a company located in Shenzhen with a factory in Dongguan, China. With over 10 years of experience in manufacturing auto electronics, including car radios, portable CarPlay displays, rear-view camera systems, car frames, and dash cams, Shenzhen Cheyang Technology Co. Ltd. is dedicated to serving global automobile users. The company focuses on integrating research and development, offering OEM/ODM and drop shipping solutions, and maintaining high quality through strict QC procedures and long aging tests. WIIYII aims to provide excellent products and services, enriching people's car life with innovation and trustworthiness.

Video 11.1: An overview of Shenzhen Cheyang Technology Co. Ltd.'s manufacturing process and facilities.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.