Xiaomi GT3 MAX

Contents

Xiaomi GT3 MAX GPS Drone User Manual

Model: GT3 MAX

Introduction

This manual provides comprehensive instructions for the safe and efficient operation of your Xiaomi GT3 MAX GPS Drone. This drone is designed for entertainment and leisure, suitable for beginners and young aviation enthusiasts. It features 8K aerial HD photography, optical flow positioning, obstacle avoidance, a brushless motor, and 5G WIFI connectivity. Please read this manual carefully before use and retain it for future reference.

Disclaimer: This product is not suitable for children under 12 years of age. Adult supervision is recommended for all users.

Product Overview

Package Contents

ItemQuantity
GT3 Drone1
Remote Control1
3.7V Lipo Battery1
USB Charging Cable1
Spare Blades4
Screwdriver1
User Manual2 copies
Fan Blade Tool1
Mobile Phone Holder1
Accessory list for GT3 MAX drone

Image: List of included accessories.

Drone Components

  • Upper chassis cover
  • Lower chassis cover
  • Propeller blades
  • Battery
  • Electric motors
  • Camera
Xiaomi GT3 MAX Drone with remote control

Image: Xiaomi GT3 MAX Drone and its remote control, highlighting key features like GPS, 5G Wifi, and 8K UHD camera.

Setup

1. Battery Installation and Charging

Drone Battery:

  1. Remove the Lithium battery from the bottom of the drone.
  2. Connect the USB charging cable to the battery's charging port.
  3. The LED light on the charger will be on during charging and turn off when fully charged. Charging takes approximately 120 minutes.

Caution: Use the original charger. Do not overcharge. Disconnect when fully charged. Do not charge near flammable materials. Always monitor charging. Do not charge cold batteries. Recommended charging temperature: 0°C to 40°C.

Product size diagram for GT3 MAX drone

Image: Diagram showing the dimensions of the GT3 MAX drone.

Remote Control Batteries:

  1. Open the battery cover of the remote control.
  2. Insert 3 AAA batteries according to the polarity markings.

Caution: Ensure correct polarity. Do not mix old and new batteries, or different types of batteries.

2. Propeller Assembly

  1. If replacing, use the disassembly tool to gently lift and remove the old propeller blades.
  2. Align the new propeller blades with the motor shaft and press them down firmly by hand until secure.

3. Phone Clip Installation (for App Control)

Align the phone clip with the top groove of the remote control and slide it in until it clicks into place.

Operating Instructions

1. Pre-Flight Environment Check

  • Indoor Flight: Choose spacious rooms free from obstacles, crowds, or pets.
  • Outdoor Flight: Prefer sunny, windless, or slightly windy conditions.
  • Always keep the drone within visual range. Avoid flying near obstacles, high-voltage cables, trees, and people.
  • Do not fly in extreme weather conditions such as excessive heat, cold, strong winds, or heavy rain.
  • Avoid flying near airports, highways, train stations, subways, and densely populated urban areas.
Drone with optical flow stabilization hover

Image: Drone demonstrating optical flow stabilization for stable indoor and outdoor flight.

2. Connecting Transmitter and Drone

  1. Turn on the drone and place it on a horizontal surface. The transmitter indicator and drone LED will blink.
  2. Push the throttle stick (left joystick) to its highest point, then pull it back to the lowest point. You will hear two beeps. The transmitter indicator and drone LED will become solid, indicating a successful connection.

3. Transmitter Calibration

If the drone does not ascend vertically, it may need calibration:

  • Move both the left and right control sticks to the bottom-left or bottom-right corners simultaneously (as shown in the manual diagram).
  • You will hear a beep, and the drone's LED will blink rapidly.
  • Wait for the LED to become solid, indicating calibration is complete.
  • Ensure the drone is on a stable, horizontal surface during calibration for best results.

4. Basic Flight Controls

Drone and remote control with various features

Image: Drone and remote control, illustrating various flight features and controls.

One-Click Takeoff and Landing:

  • Press the "One-Click Up" button. The drone's blades will spin, and it will automatically ascend to a height of approximately 1.5 meters.
  • Press the button again to initiate a one-click landing.
One-click takeoff and landing feature

Image: Visual representation of the one-click takeoff and landing function.

Manual Flight:

  • Left Joystick: Controls altitude (up/down) and left/right rotation.
  • Right Joystick: Controls forward/backward movement and left/right lateral flight.

Hover Function:

Release the left joystick (after an up/down movement), and the drone will automatically hover at its current height.

Speed Control:

Lightly press the speed control button to cycle through speed modes. One beep indicates slow speed, two beeps indicate fast speed. The default speed is low.

LED Light Control:

The LED lights are on by default when the drone starts. Press the light control button to turn them off.

High-brightness LED lamp for night flight

Image: Drone with high-brightness LED lamps, useful for night flight.

5. Advanced Flight Features

Obstacle Avoidance Mode:

  • Press the dedicated obstacle avoidance button to activate or deactivate this mode.
  • The drone will detect and avoid obstacles on three sides, automatically retreating from them.
  • This mode is recommended for indoor flight in areas of at least 6x6 meters.
  • Note that in obstacle avoidance mode, the drone's speed is reduced, and it cannot accelerate quickly.

Video: Product demonstration showcasing features like one-click takeoff, wireless signal transmission, optical flow localization, adjustable camera, bottom camera view, real-time transmission, obstacle avoidance, multi-gear speed, modular battery, 360° stunt roll, trajectory flight, and one-touch landing.

360° Flip & Roll:

When the drone is flying at an altitude greater than 3 meters, click the "360° turn and roll" button and move the right joystick in the desired direction to perform a stunt roll.

Drone performing a 360 degree roll stunt

Image: Drone executing a 360° stunt roll.

Headless Mode:

In headless mode, there is no need to determine the orientation of the aircraft during flight, making control simpler.

One-Click Auto Return:

Utilize the one-click return function to easily bring the drone back to its starting point.

Trajectory Flight:

Draw a flight path on the connected application screen, and the drone will autonomously fly along the specified path.

Gesture Photography/Video Recording:

During flight, aim at the camera and make corresponding gestures to immediately take a photo or record a video. This feature is fast and convenient.

Gesture photography and 50x zoom features

Image: Illustration of gesture photography and 50x zoom capabilities.

50x Zoom:

The camera supports 50x zoom, allowing for free zooming without fear of distant views, making it more user-friendly.

Real-time Image Transmission:

The remote control features a 12.5cm smart screen for real-time image transmission via WiFi, providing a clear and enhanced viewing experience without needing a separate mobile phone.

12.5cm smart screen on remote control

Image: The remote control with its 12.5cm smart screen for real-time image transmission.

Maintenance

Battery Care and Recycling

  • Always use the original charger for safe charging.
  • Do not charge expanded or damaged batteries.
  • Avoid overcharging; disconnect the charger once the battery is full.
  • Charge batteries in a safe, non-flammable environment, and always monitor the charging process.
  • Do not charge batteries that are still warm from use.
  • Dispose of batteries according to local regulations, not with general household waste.

Propeller Maintenance

  • Regularly inspect propellers for damage (cracks, bends). Replace damaged propellers immediately using the provided tool.
  • Ensure propellers are securely attached before each flight.

General Cleaning

  • Wipe the drone and remote control with a soft, dry cloth.
  • Avoid using harsh chemicals or solvents.

Troubleshooting (Frequently Asked Questions)

ProblemPossible ReasonSolution
Drone out of control / UnresponsiveNot connected to quadcopter battery.Connect the quadcopter battery correctly.
Wind too strong.Do not fly in windy conditions. Strong winds can affect performance and control.
Failed to ascendMain blade speed too slow.Push the throttle stick up.
Quadcopter battery not fully charged.Fully charge the quadcopter battery.
Lands too earlyPulled power control lever back too quickly.Pull the power control lever back slowly for a gentle landing.
Loss of control (range)Exceeded effective control distance.Operate within controllable range: 100m for remote control, 40-50m for WIFI control.

Specifications

FeatureDetail
Model NumberGT3
Brand NameMIJIA (Xiaomi)
MaterialsABS plastic and electronic components, Plastic, Metal
ColorBlack/Grey
Gyroscope6-axis
Frequency2.4G
Channel4CH, 6 channels
Motor716 motor, Brushless Motor
Drone Weight70g
Takeoff Weight70g
Battery3.7V Lipo battery (included), Lithium battery
Remote Control Power SupplyAAA * 3 (self provided), USB charge
Remote Control ModeLeft throttle, right direction, MODE1, MODE2
Flight TimeApproximately 10 minutes, 10~20 minutes
Charging Time60 minutes (drone battery: 120 minutes)
FPVWiFi
CameraOptical flow electrically adjustable dual camera
Video Capture Resolution4K/6K/8K, 8K UHD
Camera AngleElectrically adjustable 180°
Dimensions (Quadcopter)13.6*11*4.7 cm
Packaging WeightApproximately 295 grams
Packaging Size (Box)17.6*14.6*9.1 cm
Max Flight Speed4m/s (Medium), 3m/s (Low), 6m/s (High)
Max Flight Altitude50m
Remote Distance200m
Anti-wind Ability10m/s
Operator Skill LevelBeginner, Intermediate, Expert
Indoor/Outdoor UseIndoor-Outdoor
Aerial PhotographyYes
FeaturesApp-Controlled, Auto Return, FPV Capable, Obstacle Avoidance, Wi-fi, Other
Recommend Age12+y, 14+y

Note: Some specifications may vary slightly depending on the specific package or configuration. Please refer to your product packaging for the most accurate details.

User Tips

  • Extended Flight Time: Consider purchasing additional 3.7V Lipo batteries to extend your flight sessions, as the drone's flight time is approximately 10-20 minutes per battery.
  • Optimal Charging: Always use the provided USB charging cable and ensure the drone battery is fully charged (approx. 120 minutes) before each flight for maximum performance.
  • Indoor Obstacle Avoidance: When flying indoors, utilize the obstacle avoidance mode in spaces larger than 6x6 meters for safer operation, keeping in mind the reduced speed in this mode.
  • Beginner-Friendly: The drone offers features like one-click takeoff/landing and headless mode, making it easier for beginners to learn and enjoy flying.
  • Visual Line of Sight: Always maintain visual line of sight with your drone, especially when flying at night, to ensure safe operation and prevent loss of control.

Warranty and Support

For any issues or questions regarding your Xiaomi GT3 MAX GPS Drone, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase for any warranty claims.

A PDF version of the user manual is available for download from the seller's product page for detailed instructions and diagrams. Please refer to the product listing for the direct link: User Manual (PDF)


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.