BONROAD Wireless CarPlay Android Auto Interface for BMW NBT System

Contents

Bonroad Wireless CarPlay Android Auto Interface for BMW NBT System

User Manual

1. Introduction and Overview

This manual provides detailed instructions for the installation, operation, and maintenance of your Bonroad Wireless CarPlay Android Auto Interface. This device is designed to upgrade your original BMW NBT system, adding modern smartphone integration features such as Wireless CarPlay, Wireless Android Auto, Airplay, and Autolink, without replacing your car's original screen.

The interface allows seamless integration with your existing BMW NBT system, utilizing original car controls for a familiar user experience. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Important Safety Information

  • Professional Installation Recommended: Installation of this product involves working with your vehicle's electrical system and interior components. If you lack relevant installation experience, it is strongly recommended to seek assistance from a professional installer.
  • Pre-Installation Support: If you plan to install the device yourself, please contact the seller for support and specific settings information required before beginning the installation process.
  • Product Identification: This product is a CarPlay interface decoder box, not a replacement car screen. It integrates with your existing display.
  • System Compatibility: Ensure your car has an Original NBT system with a 6-PIN LVDS connector (ID4 menu). This device is not compatible with ID5 or ID6 radio menus, nor is it guaranteed to work with retrofitted NBT systems unless explicitly confirmed by the seller.

3. Package Contents

Please verify that all items listed below are included in your package:

  • Bonroad Wireless CarPlay Android Auto Decoder Box (Main Unit)
  • Power Cable
  • LVDS Cable
  • RCA/USB Cable
  • Microphone
  • WiFi Antenna
Bonroad Wireless CarPlay Android Auto Decoder Box and Included Accessories
Figure 3.1: Decoder Box and Included Accessories

4. Compatibility

This Bonroad interface is specifically designed for BMW vehicles equipped with the Original NBT system (ID4 menu) and a 6-PIN LVDS connector. It supports original car screens with sizes of 6.5", 8.8", or 10.25".

Important: This device is NOT compatible with BMW CIC or EVO systems, or NBT systems with ID5/ID6 menus. Please confirm your car's system type before installation.

BMW NBT System Identification Guide
Figure 4.1: Visual guide to identify BMW NBT, CIC, and EVO systems. Ensure your system matches the NBT (ID4 menu) shown.

Compatible BMW Models and Years:

BMW SeriesChassis CodeYearsNotes
1 SeriesF20, F212013-2015Original NBT system
2 SeriesF23 Convertible, F22, F45 MPV2013-2015Original NBT system
3 SeriesF30, F31, F34, F802012-2015Original NBT system
4 SeriesF32, F33, F362013-2015Original NBT system
5 SeriesF07, F10, F11, F182012-2017Original NBT system
6 SeriesF06, F12, F132013-2016Original NBT system
7 SeriesF01, F02, F032012-2015Original NBT system
MINIF56AllOriginal 6.5/8.8 inch screen with NBT System
X1F482015-2018Original NBT system
X3F252013-2016Original NBT system
X4F262014-2016Original NBT system
X5F15, F852014-2016Original NBT system
X6F16, F862014-2016Original NBT system
i8I122014-2018Original NBT system
Compatible Car Models and System Functions
Figure 4.2: Overview of compatible car models and supported functions.

5. Setup and Installation

The Bonroad Wireless CarPlay Android Auto Interface is designed for integration into your BMW's existing NBT system. Due to the complexity of automotive electronics, professional installation is highly recommended.

General Installation Steps (Consult a professional or seller for detailed instructions):

  1. Preparation: Ensure the vehicle's ignition is off and the battery is disconnected before starting any electrical work.
  2. Access the Head Unit: Carefully remove the necessary trim panels and components to gain access to the back of your BMW's head unit and screen.
  3. Connect LVDS Cables: Disconnect the original LVDS cable from the screen and connect it to the 'IN LVDS' port on the decoder box. Then, connect the provided LVDS cable from the 'OUT LVDS' port on the decoder box to the screen.
  4. Connect Power and CAN Bus: Connect the provided power cable and CAN bus wires to the corresponding ports on the decoder box and integrate them with the vehicle's wiring harness as per the specific wiring diagram (provided by the seller upon request).
  5. Connect USB and Video: Connect the RCA/USB cable to the 'USB VIDEO' port on the decoder box. This allows for USB media playback and potential video input.
  6. Connect Microphone and WiFi Antenna: Attach the external microphone for hands-free calling and voice commands, and the WiFi antenna for wireless connectivity.
  7. Toggle Switch Configuration: The 'TOGGLE SWITCH' may be used for specific system settings or modes. Consult the seller's instructions for its proper configuration.
  8. Test Functionality: Reconnect the battery, turn on the ignition, and test all functions (CarPlay, Android Auto, original system, audio, camera, controls) before reassembling the dashboard.
  9. Reassembly: Carefully reassemble all removed trim panels and components.

Note: Specific wiring diagrams and detailed installation guides are typically provided by the seller or manufacturer upon purchase. Always refer to these specific documents for your exact vehicle model.

6. Operating Instructions

Once installed, the Bonroad interface allows you to seamlessly switch between your original BMW NBT system and the new CarPlay/Android Auto interface.

Dual System Interchange Illustration
Figure 6.1: Switching between original BMW system and CarPlay/Android Auto interface.

6.1 Switching Between Systems

The device supports a dual-system interchange. You can switch between the original BMW NBT system and the CarPlay/Android Auto system freely, typically by pressing and holding a specific button on your iDrive controller or steering wheel (refer to seller's specific instructions for the exact button).

6.2 Wireless CarPlay and Android Auto

Connect your iPhone or Android smartphone wirelessly to access CarPlay or Android Auto. This allows you to use navigation apps, stream music, make hands-free calls, and send messages directly from your car's display.

Wireless CarPlay in Action
Figure 6.2: Example of Wireless CarPlay interface on the car screen.
Wireless Android Auto in Action
Figure 6.3: Example of Wireless Android Auto interface on the car screen.

6.3 Navigation

Utilize popular navigation applications such as Google Maps, Waze Map, and Apple Maps directly on your car's screen for real-time directions and traffic information.

Navigation Maps Display
Figure 6.4: Navigation maps (Google, Waze, Apple) displayed on the car screen.

6.4 Media Playback

Connect your phone via Bluetooth to play online music or use the USB port for media playback from a USB flash drive.

Online Music Playback
Figure 6.5: Online music playback interface.

6.5 Hands-Free Calling

Make and receive calls safely using the hands-free calling feature, displayed on the car screen. The included microphone ensures clear audio communication.

Hands-Free Calling Interface
Figure 6.6: Hands-free calling interface on the car screen.

6.6 Original Car Control Integration

The CarPlay interface decoder box supports the original car's voice control button, telephone button, and volume "+" and "-" buttons. Other original buttons may not be supported. Both the original iDrive knob and steering wheel controls can be used to operate the CarPlay/Android Auto interface.

Original Car Controls Compatibility
Figure 6.7: Supported original car controls including iDrive knob and steering wheel buttons.

6.7 Reversing Camera Support

The system supports your factory reverse camera and parking radar. It also supports aftermarket cameras and 360-degree camera systems, enhancing parking safety.

Original Car Rear Camera Display
Figure 6.8: Display of original car rear camera and parking radar.

7. Features

The Bonroad Wireless CarPlay Android Auto Interface offers a comprehensive set of features to enhance your driving experience:

  • Wireless CarPlay: Seamless integration for iPhone users.
  • Wireless Android Auto: Seamless integration for Android smartphone users.
  • Airplay & Autolink: Mirroring capabilities for compatible devices.
  • Navigation Maps: Support for Google Maps, Waze Map, Apple Maps, and other standard navigation applications.
  • Bluetooth Connectivity: For hands-free calling and audio streaming.
  • Hands-Free Calling: Safe communication while driving.
  • Online Music: Stream music from your smartphone or via USB.
  • Reversing Camera Support: Compatible with factory, aftermarket, and 360-degree cameras.
  • Siri Control: Voice command functionality for iOS devices.
  • USB Flash Drive Support: For media playback.
  • Dual System Interchange: Easily switch between the original BMW NBT system and the CarPlay/Android Auto interface.
  • Original Car Control Integration: Operates with original iDrive knob, voice control, telephone, and volume buttons.
Original Car Upgrade Module Features
Figure 7.1: Icons representing the key features of the upgrade module.

8. Troubleshooting

If you encounter issues with your Bonroad Wireless CarPlay Android Auto Interface, please refer to the following common troubleshooting tips:

  • No Display/Black Screen:
    • Check all LVDS cable connections to ensure they are securely seated.
    • Verify power connections to the decoder box.
    • Ensure the correct input source is selected on your car's screen (if applicable).
  • CarPlay/Android Auto Not Connecting:
    • Ensure your phone's Bluetooth and Wi-Fi are enabled.
    • Forget the device from your phone's Bluetooth/Wi-Fi settings and try pairing again.
    • Restart both your phone and the car's infotainment system.
    • Check the 'TOGGLE SWITCH' settings on the decoder box; consult the seller for correct configuration.
  • Audio Issues:
    • Ensure the car's audio input is set to AUX or the correct source for the CarPlay/Android Auto audio.
    • Check volume levels on both your phone and the car's system.
    • Verify microphone connection for hands-free calling.
  • Controls Not Responding:
    • Confirm that the iDrive controller and steering wheel buttons are correctly integrated during installation.
    • Note that only specific original buttons (voice control, telephone, volume +/-) are supported.
  • Compatibility Concerns (e.g., with retrofitted NBT systems):
    • The device is designed for original NBT systems with a 6-PIN LVDS (ID4 menu). If you have a retrofitted NBT system, compatibility is not guaranteed and requires prior verification with the seller.

If these steps do not resolve the issue, please contact Bonroad customer support for further assistance.

9. Specifications

FeatureSpecification
Product TypeWireless CarPlay Android Auto Interface Decoder Box
BrandBONROAD
Compatible Car SystemBMW Original NBT System (ID4 menu, 6-PIN LVDS)
Supported Screen Sizes6.5", 8.8", 10.25"
ConnectivityWireless CarPlay, Wireless Android Auto, Airplay, Autolink, Bluetooth, USB, WiFi
Dimensions (L x W x H)25 cm x 16 cm x 10 cm (approx.)
Weight1.0 kg (approx.)
Input PortsCAN, POWER, USB, VIDEO, IN LVDS
Output PortsOUT LVDS

10. User Tips

  • Verify NBT System: Always double-check that your car has an *original* NBT system with a 6-pin ID4 menu. If you have a retrofitted NBT system (e.g., in an E92), verify compatibility with the seller before purchase, as the device is designed for original NBT systems.
  • DIY Installation Guidance: For self-installation, contact the seller for specific settings and guidance to ensure proper functionality and avoid potential issues. There are often specific configurations required post-installation.
  • Firmware Updates: Periodically check with the manufacturer or seller for any available firmware updates to ensure optimal performance and compatibility with the latest smartphone operating systems.
  • Cable Management: During installation, ensure all cables are neatly routed and secured to prevent interference, damage, or rattling noises.

11. Maintenance

To ensure the longevity and optimal performance of your Bonroad Wireless CarPlay Android Auto Interface, follow these simple maintenance guidelines:

  • Keep Clean: Regularly wipe the exterior of the decoder box and any exposed components with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
  • Ensure Ventilation: Make sure the decoder box is installed in a location that allows for adequate airflow to prevent overheating.
  • Check Connections: Periodically check all cable connections to ensure they remain secure and free from corrosion or damage.
  • Avoid Liquids: Keep the device away from liquids and moisture to prevent electrical damage.
  • Temperature Control: Operate the device within your vehicle's normal operating temperature range. Extreme temperatures can affect performance and lifespan.

12. Warranty and Support

For warranty information, technical support, or any questions regarding your Bonroad Wireless CarPlay Android Auto Interface, please contact the seller or manufacturer directly. It is recommended to retain your proof of purchase for warranty claims.

If you have any questions or require assistance, do not hesitate to reach out to the Bonroad support team.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.