Ainavi 12.3-inch Wireless Carplay Android Auto Car Radio for BMW X5 E70 X6 E71

Contents

Ainavi 12.3-inch Wireless Carplay Android Auto Car Radio User Manual

For BMW X5 E70 & X6 E71 (CCC/CIC Systems)

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Ainavi 12.3-inch Wireless Carplay Android Auto Car Radio. Designed for BMW X5 E70 and X6 E71 models, this multimedia player enhances your driving experience with advanced features and seamless integration.

Important Note:

  • Please confirm your car's original system (CCC or CIC) before installation. Refer to the images below for identification.
  • If your original system is CCC, ensure the audio option includes "Audio AUX" before installation. Without this option, there will be no sound after the unit is installed.
BMW CCC and CIC System Identification
Figure 1: Identifying your BMW's original CCC or CIC system. The image displays examples of both CCC and CIC system interfaces, along with an 'Audio AUX' option for CCC systems.

Setup and Installation

The Ainavi Car Radio is designed for plug-and-play installation, directly compatible with your vehicle's existing wiring. Professional installation is recommended.

Package Contents

Before beginning installation, verify that all components are present:

Ainavi Car Radio Product List
Figure 2: Included components: 12.3-inch Screen, Frame, Power cable, USB Cable, 4G antenna (for V3/V5 models), and GPS antenna (for V3/V5 models).

Installation Steps (General Guide)

  1. Preparation: Turn off your vehicle and disconnect the battery to prevent electrical damage.
  2. Remove Original Unit: Carefully remove the original car radio unit and display from the dashboard.
  3. Connect Wiring: Connect the provided power cable, USB cable, and other necessary harnesses to the corresponding ports on the new Ainavi unit and your vehicle's wiring. Ensure all connections are secure.
  4. Antenna Installation: Install the 4G and GPS antennas (if applicable to your model, V3/V5). Position them for optimal signal reception.
  5. Mount New Unit: Securely mount the new 12.3-inch screen and its frame into the dashboard.
  6. Test Functionality: Reconnect the battery and turn on the vehicle. Test all functions of the new unit, including audio, display, touch screen, and connectivity.
Plug and Play Wiring Diagram
Figure 3: Illustration of the plug-and-play wiring, showing connections to the original radio plug and support for fiber optics.

Operating Instructions

Your Ainavi multimedia player offers a range of features for an enhanced in-car experience.

Core Features

  • Wireless Carplay & Android Auto: Seamlessly connect your smartphone for hands-free control of calls, music, and navigation.
  • Built-in GPS: Android models support various map applications like Google Maps, Navitel, and Waze.
  • Bluetooth: Connect your mobile phone for multimedia playback and hands-free calling.
  • Multimedia Playback: Play high-definition videos and various audio formats (MP3, MP4, WMA, JPEG).
  • USB Interface: Two USB interfaces are available for connecting USB drives and charging mobile phones.
  • ID8 UI: Experience a sleek and immersive user interface.
Carplay and Android Auto Interface
Figure 4: Display of Wireless Carplay and Android Auto interfaces, showing common applications like Phone, Music, Maps, and Messages.
GPS Navigation Interface
Figure 5: Examples of GPS navigation interfaces, including Google Maps and Waze, supported by Android models.
Multimedia Entertainment Features
Figure 6: Overview of multimedia entertainment options, including Bluetooth music/calls, video playback, and USB connectivity.

Integration with Original Car System

The unit maintains compatibility with several original car features:

  • Steering Wheel Control: Continue to use your vehicle's steering wheel controls.
  • iDrive Control: The original iDrive controller remains functional.
  • Original Audio System: The unit utilizes your car's existing sound system.
  • Car Information Display: Important car information (speed, engine speed, fuel, brake warning, temperature, seat belt warning, door status) can be displayed on the new screen.
  • Original Rear Camera: Supports the display from your vehicle's original rear camera. An optional AHD rear camera upgrade is also available.
Car Information Display
Figure 7: Example of car information displayed on the unit, including speed, engine speed, fuel level, and various warnings.
AHD Camera Compatibility
Figure 8: Information regarding AHD camera compatibility and an optional upgrade. Includes a table for E70 E71 CCC/CIC and Camera Code.

Maintenance

To ensure the longevity and optimal performance of your Ainavi car radio, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry, anti-static cloth to clean the screen and unit. Avoid abrasive cleaners or solvents that could damage the display or finish.
  • Software Updates: For Linux-based devices (V2), 2.4GHz Wi-Fi is available for OTA (Over-The-Air) updates. Android devices (V3/V5) also support updates via 4G+5GWifi. Regularly check for and install available software updates to ensure the best performance and access to new features.
  • Environmental Conditions: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
  • Cable Connections: Periodically check all cable connections to ensure they are secure and free from damage.

Troubleshooting

If you encounter issues with your Ainavi car radio, refer to the following common problems and solutions:

  • No Sound After Installation (CCC System):
    Solution: This is often due to the original CCC system lacking the "Audio AUX" option. Before installation, verify that your car's original audio menu includes "Audio AUX". If it does not, the unit will not produce sound. Consult a professional for potential workarounds or ensure compatibility before purchase.
  • Unit Not Powering On:
    Solution: Check all power cable connections. Ensure the vehicle's battery is properly connected and charged. Verify that the fuse for the car radio is intact.
  • Touch Screen Unresponsive:
    Solution: Try restarting the unit. If the issue persists, ensure the screen is clean and free from debris. If the problem continues, a factory reset might be necessary (consult support for specific steps).
  • GPS Signal Issues:
    Solution: Ensure the GPS antenna is correctly installed and positioned with a clear view of the sky. Obstructions can interfere with signal reception.
  • Carplay/Android Auto Not Connecting:
    Solution: Ensure your smartphone's Bluetooth and Wi-Fi are enabled. Check that the phone is compatible with Wireless Carplay/Android Auto. Try restarting both the car unit and your phone.

Specifications

The Ainavi 12.3-inch Car Radio is available in different models (V2, V3, V5) with varying specifications:

Product Specifications Table
Figure 9: Detailed product specifications comparing V2, V3, and V5 models.
Ainavi Car Radio Model Specifications
FeatureV2 ModelV3 ModelV5 Model
CPUT113Qualcomm 665 8 Core 2.0GHzQualcomm 665 8 Core 2.0GHz
RAM+ROM256M+32M4G+64G8G+128G
SystemLinuxAndroid 11Android 11
Screen PixelsHD 1920*720HD 1920*720HD 1920*720
CarplayWirelessWirelessWireless
Android AutoWirelessWirelessWireless
Network2.4GWifi (For OTA upgrade)4G+5GWifi4G+5GWifi
Download APPNoYesYes
Original CAM NTSC SignalSupportSupportSupport
Rear CAM (Optional)AHD-720PAHD-720PAHD-720P

General Specifications

  • Display Size: 12.3 inches
  • Resolution: 1920*720
  • Processor Type: Qualcomm
  • Processor Speed: 2.0GHz (for V3/V5)
  • Operating System: Android (V3/V5), Linux (V2)
  • Voltage: 12 V
  • Item Weight: 2.5kg
  • Max External Memory: 128G
  • Material: Glass
  • Certifications: CE, FCC, RoHS, WEEE

Warranty and Support

For any product-related inquiries, technical assistance, or warranty claims, please contact Ainavi customer support through your purchase platform. Refer to the platform's return and refund policy for details on product returns or exchanges.

User Tips

  • System Compatibility Check: Always double-check your BMW's original system (CCC or CIC) and the presence of the "Audio AUX" option for CCC systems before purchasing and installing to avoid sound issues.
  • Professional Installation: While designed for plug-and-play, professional installation is highly recommended to ensure correct wiring and optimal performance, especially for complex car systems.
  • Utilize Wireless Connectivity: Take full advantage of Wireless Carplay and Android Auto for a safer and more convenient driving experience.
  • Keep Software Updated: Regularly update the unit's software to benefit from performance improvements, bug fixes, and new features.
  • Optimize GPS: Ensure your GPS antenna has a clear line of sight for the best navigation accuracy.

© 2023 Ainavi. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.