SANS 54V 2A Smart Charger

Contents

SANS 54V 2A Smart Charger User Manual

Model: SSLC109V55

For 48V Li-ion Battery E-Bikes, Electric Bicycles, and E-Scooters

1. Introduction

This manual provides essential instructions for the safe and efficient use of your SANS 54V 2A Smart Charger. This charger is specifically designed for 48V Li-ion batteries commonly found in e-bikes, electric bicycles, and e-scooters. Please read this manual thoroughly before operating the charger and retain it for future reference.

2. Safety Information

⚠️ WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. Failure to do so may result in property damage, injury, or death.

  • The charger features multiple safety protections: Over Voltage Protection (OVP), Over Current Protection (OCP), Overload Protection (OLP), and Short-Circuit Protection (SCP).
  • The charger conforms to the latest UL 1012:2010 R4.16 safety standard and is TUV Certified, ensuring a safer charging experience.
  • The charger is designed with a flame-retardant shell to minimize burn hazards and provide durable, stable performance. It is also impact-resistant and anti-static.
  • Critical Warning: If the green indicator light immediately illuminates after connecting the charger to the battery, immediately disconnect the power supply and measure the battery voltage. DO NOT USE THE CHARGER if your battery voltage is below 35.7V, as this is DANGEROUS.
  • Use the charger indoors only.
  • Charge only 54.6V battery type rechargeable batteries.
SANS charger highlighting multiple safety protections: Over Voltage, Short Circuit, Over Temperature, Over Current Protection.
Figure 2.1: Superior Safety Features
SANS charger emphasizing safety design with impact resistant, anti-static, and flame-retardant properties.
Figure 2.2: Designed for Safety

3. Product Overview

3.1 Components

  • SANS 54V 2A Smart Charger Unit
  • AC Power Cord (integrated or detachable, depending on model)
  • DC Output Cable with 5.5mm Outer / 2.1mm Inner Diameter DC Plug

3.2 Features

  • Smart Indicator Light: Clearly displays charging status (Red for charging, Green for fully charged).
  • Wide Compatibility: Designed for 48V Li-ion batteries used in various e-mobility devices.
  • Robust Construction: Flame-retardant, impact-resistant, and anti-static casing.
  • Certified Safety: UL 1012:2010 R4.16 and TUV Certified.
Close-up of the SANS charger's smart indicator light, showing red for charging and green for fully charged.
Figure 3.1: Charging Indicator Light
Diagram illustrating the 2.1mm DC plug with 5.5mm outer diameter and 2.1mm inner diameter, and a compatibility chart for various DC plug sizes.
Figure 3.2: DC Plug Specifications

4. Setup

  1. Ensure the charger's DC plug (5.5mm outer, 2.1mm inner diameter) is compatible with your battery's charging port.
  2. Connect the DC output plug of the charger securely to the charging port of your 48V Li-ion battery.
  3. Plug the AC power cord of the charger into a standard AC120V wall outlet.
  4. Observe the indicator light on the charger. It should illuminate RED, indicating that charging has begun.
  5. If the indicator light immediately turns GREEN upon connection to the battery (before plugging into AC), disconnect immediately and check your battery's voltage. Do not proceed if the battery voltage is below 35.7V.
SANS 54.6V 2A E-Bike Charger connected to an e-bike for charging.
Figure 4.1: Charger Connection Example

5. Operating Instructions

5.1 Charging Process

  • Once properly connected, the charger's indicator light will be RED, signifying that the battery is actively charging.
  • When the battery is fully charged, the indicator light will turn GREEN.
  • It is recommended to disconnect the charger from the battery and the power outlet once charging is complete.

5.2 Compatible Devices

This charger is compatible with 48V Li-ion batteries used in various electric vehicles, including but not limited to:

  • Ride1Up: Core-5, Turris, Cafe Cruiser, 700 Series, LMT'D, 500 Series (Discontinued), 700 series
  • Lectric: XP (1.0, 2.0, 3.0 models), XP Step-Thru (1.0, 2.0, 3.0 models), XP Lite, XPremium, XP Trike, XPedition
  • SONDORS: Fold X, Fold XS, X, XS, MXS
  • Himiway: Cruiser, Cruiser step Thru, Escape, Escape Pro
  • Aventon: Level bike
  • Kasen: KABBIT PLUS, KASEN CITY, KASEN CROSS, City 2.0 new
  • eahora: X5, X7, XC100, AM200, XC200, XC300
  • Evelo: Compass
  • Other devices that use a 48V lithium battery with a compatible 5.5mm/2.1mm DC charging port.
Image showing the SANS charger and a list of compatible e-bike and e-scooter brands and models.
Figure 5.1: Compatible Brands and Devices

6. Maintenance

  • Keep the charger clean and dry. Avoid exposure to moisture or extreme temperatures.
  • Do not attempt to open or modify the charger. This will void the warranty and could be dangerous.
  • Store the charger in a cool, dry place when not in use.
  • Regularly inspect the cables and plug for any signs of damage. If damaged, discontinue use and replace the charger.

7. Troubleshooting

ProblemPossible CauseSolution
Indicator light immediately turns GREEN when connected to battery (before AC power).Battery voltage is too low (below 35.7V) or battery is faulty.Immediately disconnect the charger. Measure battery voltage. If below 35.7V, do not use the charger with this battery. Consult a professional for battery inspection.
No indicator light when connected to battery and AC power.Loose connection, no power from outlet, or faulty charger/battery.Check all connections. Try a different power outlet. Ensure the DC plug is fully inserted. If problem persists, the charger or battery may be faulty.
Charger gets excessively hot during operation.Poor ventilation, faulty charger, or battery issue.Ensure the charger is in a well-ventilated area. Do not cover it. If overheating continues, discontinue use and contact support.

8. User Tips

  • Always ensure the charger's DC plug matches your battery's charging port specifications (5.5mm outer, 2.1mm inner diameter) to prevent damage.
  • For optimal battery life, avoid completely draining your battery before charging.
  • Store the charger and battery in a temperature-controlled environment, away from direct sunlight or extreme cold.

9. Specifications

FeatureDetail
ModelSSLC109V55
Input VoltageAC120V ~ 2.0A Max, 47-63Hz
Output Voltage/Current54.6V === 2.0A
Compatible Battery Type48V Li-ion Battery (54.6V rechargeable type)
DC Plug DimensionsOuter Diameter: 5.5 mm, Inner Diameter: 2.1 mm
Charger Unit Dimensions (L x W x H)Approx. 6.6 in x 3.3 in x 1.8 in
AC Power Cord LengthApprox. 71 in
DC Output Cable LengthApprox. 44 in
WeightApprox. 0.75 kg
Safety CertificationsUL 1012:2010 R4.16, TUV Certified
ProtectionsOver Voltage, Over Current, Overload, Short-Circuit, Over Temperature
Diagram showing the physical dimensions of the SANS charger unit and its power cords.
Figure 9.1: Charger Dimensions
Close-up of the charger's label showing model number SSLC109V55, input AC120V~2.0A, and output 54.6V===2.0A.
Figure 9.2: Charger Label with Electrical Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the seller's contact information or the product packaging. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.