UGREEN HP206

Contents

UGREEN Studio Pro Wireless Headphones HP206

Instruction Manual

1. Introduction

The UGREEN Studio Pro HP206 are advanced wireless over-ear headphones designed to deliver an immersive audio experience. Featuring Hybrid Active Noise Cancellation up to 48dB, Hi-Res Audio with LDAC decoding, and an ultra-long battery life, these headphones are perfect for music enthusiasts and professionals alike. This manual provides detailed instructions for setup, operation, and maintenance to ensure you get the most out of your device.

UGREEN Studio Pro Wireless Headphones in black

UGREEN Studio Pro Wireless Headphones (Black)

2. Package Contents

Please check the package for the following items:

  • UGREEN Studio Pro Wireless Headphones
  • USB-C Charging Cable
  • 3.5mm Audio Cable
  • User Manual (this document)
  • Product Warranty Card
Contents of the UGREEN Studio Pro headphone package

Package Display: Headphones, cables, and documentation.

3. Product Features

  • Hi-Res Sound & LDAC Audio Decoding: Enjoy superior audio quality with 40mm dynamic drivers and support for LDAC codec (up to 990Kbps), delivering clear sound with rich details.
  • Diagram illustrating Hi-Res Audio chip and LDAC decoding

    Hi-Res Sound & LDAC Audio Decoding

  • Hybrid Active Noise Cancellation (ANC): Blocks out up to 48dB of ambient noise, reducing up to 97% of external sounds for an undisturbed listening experience.
  • Headphone side view with sound waves and a graph showing 48dB noise cancellation

    Hybrid Active Noise Cancellation up to 48dB

  • Customized Noise Cancellation with 4 Options: Choose from Adaptive Noise Cancelling, Gentle Mode, General Mode, and Ultra Mode to suit your environment.
  • Four panels showing different ANC modes: Adaptive, Gentle, General, Ultra

    Customized Noise Cancellation Modes

  • AI Wind Noise Reduction: The FF microphone automatically turns off when AI detects wind noise, minimizing interference during outdoor activities.
  • Person running outdoors wearing UGREEN Studio Pro headphones, illustrating AI Wind Noise Reduction

    AI Wind Noise Reduction in action

  • Crystal-Clear Calls: Enhanced microphone technology ensures your voice is picked up clearly during calls.
  • Person on a call using UGREEN Studio Pro headphones

    Crystal-Clear Call Quality

  • Quad-Speaker Enhanced Engine: Each earcup features a 40mm woofer and a 12mm tweeter for balanced bass, midrange, and treble.
  • Diagram showing the 40mm woofer and 12mm tweeter components

    Quad-Speaker Enhanced Engine Diagram

  • 0.06s Ultra Low Latency: A dedicated gaming mode provides ultra-low latency for a seamless gaming experience.
  • Person playing a mobile game with UGREEN Studio Pro headphones, showing 0.06s latency

    Ultra Low Latency for Gaming

  • Ultra-Long Battery Life: Up to 120 hours of playtime with ANC off, and 80 hours with ANC on. Fast charging provides 5 hours of playtime from a 10-minute charge.
  • Headphones with 120H playtime and fast charging indicators

    Battery Life and Fast Charging

  • Bluetooth 6.0 Technology: Ensures ultra-fast pairing, stable connection, and crystal-clear sound quality.
  • Diagram of Bluetooth 6.0 chip

    Bluetooth 6.0 Technology

  • Dual Connection: Connect to two devices simultaneously and seamlessly switch between them.
  • Headphones connected to a laptop and a smartphone, illustrating dual connection

    Dual Connection Feature

  • UGREEN App Support: Unlock more functions including checking battery level, connection status, selecting from 8 EQ sound effects, and customizing settings.
  • Smartphone screen showing the UGREEN app interface for headphone control

    UGREEN App Interface

  • Spatial Audio Supported: Create a three-dimensional listening experience (feature available after app installation).
  • Person wearing headphones in a large hall, with sound waves illustrating spatial audio

    Spatial Audio Experience

  • Comfortable, Foldable & Flexible Design: Adjustable angle to suit various head shapes, with memory foam cushions and soft protein leather cover for comfort. The headphones feature a lightweight and collapsible design for portability.
  • Images showing the foldable design and comfortable ear cushions of the headphones

    Comfortable and Foldable Design

4. Setup

4.1 Charging the Headphones

  1. Connect the provided USB-C charging cable to the charging port on the headphones.
  2. Connect the other end of the USB-C cable to a compatible USB power source (e.g., wall adapter, computer USB port).
  3. The LED indicator on the headphones will show the charging status. A full charge takes approximately 1.5 hours.
  4. A 10-minute quick charge provides approximately 5 hours of playtime.

4.2 Powering On/Off

  • Power On: Press and hold the Power button (usually located on one of the earcups) for a few seconds until the LED indicator lights up.
  • Power Off: Press and hold the Power button again for a few seconds until the LED indicator turns off.

4.3 Bluetooth Pairing

  1. Ensure the headphones are powered off.
  2. Press and hold the Power button for approximately 5-7 seconds until the LED indicator flashes rapidly (usually blue and red), indicating pairing mode.
  3. On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
  4. Select "UGREEN Studio Pro" from the list of found devices.
  5. Once connected, the LED indicator will typically show a solid blue light or flash slowly.

4.4 Wired Connection

For a wired connection, use the included 3.5mm audio cable:

  1. Plug one end of the 3.5mm audio cable into the audio jack on the headphones.
  2. Plug the other end into the 3.5mm audio output port of your device.
  3. The headphones will automatically switch to wired mode.

4.5 UGREEN App Installation

To unlock advanced features and customization options, download the UGREEN App:

  • Search for "UGREEN" in your device's app store (e.g., Apple App Store, Google Play Store).
  • Download and install the official UGREEN App.
  • Follow the in-app instructions to connect your Studio Pro headphones.

5. Operating Instructions

5.1 Basic Controls

The headphones feature physical buttons on the earcups for various functions:

  • Power Button: Press and hold to power on/off, short press for play/pause (when connected via Bluetooth).
  • Volume Up/Down Buttons: Short press to adjust volume.
  • ANC Button: Short press to cycle through Active Noise Cancellation modes (ANC On, Ambient Sound, ANC Off).

5.2 Active Noise Cancellation (ANC) Modes

The UGREEN Studio Pro offers four distinct ANC modes, which can typically be cycled through using the dedicated ANC button or managed via the UGREEN App:

  • Adaptive Noise Cancelling: Automatically adjusts noise cancellation levels based on your environment.
  • Gentle Mode: Provides a lighter level of noise cancellation, suitable for quiet environments where some awareness is desired.
  • General Mode: Standard noise cancellation for everyday use.
  • Ultra Mode: Maximum noise cancellation, ideal for very noisy environments like airplanes or busy commutes.

5.3 Making Calls

  • Answer/End Call: Short press the Power button.
  • Reject Call: Press and hold the Power button for 2 seconds.

5.4 Gaming Mode (Low Latency)

Activate Gaming Mode for ultra-low latency (0.06s) during gameplay. This mode can usually be toggled via the UGREEN App or a specific button combination (refer to the app or quick start guide for exact method).

5.5 Spatial Audio

Spatial Audio provides a three-dimensional listening experience. This feature is enabled and managed through the UGREEN App after installation.

5.6 EQ Sound Effects

Customize your audio experience with 8 preset EQ sound effects available through the UGREEN App. You can switch between modes like Classic, Jazz, Electronic, Popular, Classical, Rock, Bass, and Treble to match your preferences.

UGREEN app screen showing various EQ sound effects

UGREEN App EQ Settings

5.7 Dual Connection

To connect to two devices simultaneously:

  1. Pair the headphones with the first device (Device A) as described in section 4.3.
  2. Disconnect Bluetooth on Device A.
  3. Put the headphones into pairing mode again and pair with the second device (Device B).
  4. Reconnect Bluetooth on Device A. The headphones should now be connected to both devices.
  5. The headphones will intelligently switch audio sources between the two connected devices.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the headphones. Do not use harsh chemicals or abrasive materials.
  • Storage: When not in use, store the headphones in a cool, dry place, preferably in a protective case to prevent damage. The foldable design allows for compact storage.
  • Battery Care: Avoid fully discharging the battery frequently. Charge the headphones regularly, even if not used for extended periods, to maintain battery health.

7. Troubleshooting

  • Headphones won't turn on: Ensure the battery is charged. Connect to a power source and try again.
  • Cannot pair with device: Make sure the headphones are in pairing mode (LED flashing rapidly). Disable and re-enable Bluetooth on your device. Ensure the headphones are not already connected to another device.
  • No sound or low volume: Check the volume levels on both the headphones and your connected device. Ensure the correct audio output is selected on your device. If using wired mode, ensure the 3.5mm cable is fully inserted.
  • Active Noise Cancellation not effective: Ensure the earcups form a good seal around your ears. Try switching between different ANC modes via the button or app.
  • Battery life is shorter than expected: Using Active Noise Cancellation (ANC) and high volume levels will consume more battery power. The stated 120 hours playtime is with ANC off, while 80 hours is with ANC on.
  • App not connecting to headphones: Ensure Bluetooth is enabled and the headphones are paired with your device. Restart the app and/or headphones.

8. Specifications

FeatureSpecification
Product NameUGREEN Studio Pro
ModelHP206
Bluetooth Version6.0
Frequency Band2400MHz-2483.5MHz
Max. RF Output Power4dBm
Transmission Distance15m/49.2ft Max (no blocking)
Bluetooth ProfileHFP/HSP/AVRCP/A2DP/BLE/SPP
CodecsAAC/SBC/LDAC
Frequency Response20Hz-40kHz
Charging PortUSB-C
Battery TypePolymer Lithium-ion Battery
Capacity820mAh 3.7V (3.04Wh)
Limited Charging Voltage5.25V===
Charging Input5V=1A
Charging TimeAbout 1.5 hours
Operating Time120H (ANC OFF), 80H (ANC ON)
MaterialMetal, Leather
Earcups TypeSealed
Active Noise-CancellationYes
Volume ControlYes
Vocalism PrincipleDynamic
CommunicationWireless+Wired
CertificationCE, FCC
OriginMainland China
PackageUGREEN Retail Box
Table of UGREEN Studio Pro Product Specifications

Detailed Product Specifications

9. User Tips

  • For optimal sound quality and to access all advanced features like Spatial Audio and custom EQ settings, ensure you download and use the official UGREEN App. Search for "UGREEN" in your device's app store.
  • Be aware that using Active Noise Cancellation (ANC) will reduce the overall battery life. For maximum playtime, consider turning ANC off when not needed.
  • Utilize the dual connection feature to seamlessly switch audio between two connected devices, enhancing convenience for multi-device users.
  • Experiment with the 8 EQ sound effects in the UGREEN App to find the perfect audio profile for different music genres or listening preferences.

10. Warranty and Support

The UGREEN Studio Pro HP206 headphones come with a Two-Year Warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact UGREEN customer service through their official website or the contact information provided on your product warranty card.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.