1. Introduction
The SAMOLLA Electronic Fishing Reel is a newly upgraded baitcasting reel designed for various fishing methods, including ocean boat, rock, and beach fishing, as well as lake and reservoir pond fishing. It features a super large display screen and integrates advanced technology such as solar and USB charging, real-time temperature and air pressure monitoring, and a comprehensive suite of 13 functions to enhance your fishing experience.

Key Features:
- Display: Real-time recording of wire length.
- Water Depth Memory: Deep memory display function.
- Multiple Wire Number Selection: Supports PE2#-8# wire numbers.
- Fishing Alarm Function: Quickly conveys fishing signals.
- Reset Function for Wire Breakage: One-click reset for wire breakage.
- Night Background Light Function: Background light for night use.
- Energy Saving Function: Automatic screen shutdown.
- Air Pressure: Real-time air pressure display for weather information.
- Real Time Temperature Display Function: Real-time monitoring of water temperature.
- Time Display Function: Real-time monitoring of time.
- Recycling Line Speed Display: Real-time monitoring of wire collection speed.
- Bait Close Range Alarm: Beep sound when bait is 3m/5m away.
- Solar Charging: Built-in solar charging device for extended battery life.
- USB Type-C Charging: Convenient charging with waterproof plug.
- Advanced Chips: Central Processing, Temperature, Speed, and Air Pressure chips for accuracy.
- Durable Construction: CNC Aluminum Alloy Spool, Stainless Steel Base (SUS 304), Precision Brass Gear.
2. Setup Instructions
Please follow these steps carefully before using your SAMOLLA Electronic Fishing Reel for the first time.
- Power On: Single click the ON/OFF (A) button to turn on the device. Click again to turn off, or it will automatically turn off within 30 minutes without any operation.
- Select Fishing Line Number:
- In the power-on state, long press the SET (C) button for 2 seconds to enter the fish line number setting state.
- Short press the SELECT (B) button to cycle through PE line 2.0 → 3.0 → 4.0 → 5.0 → 6.0 → 7.0 → 8.0. Select your desired line number.
- Long press the SET (C) button for 2 seconds to automatically save the selected line number.
- Enter Winding Mode & Wind Line:
- In the fishing line winding mode, rotate the rocker arm to start winding the line.
- After winding the thread, press and hold the SET (C) button for 2 seconds to automatically save the length of the winding thread and switch to normal throwing mode.
- If the winding process needs to be rewound, single click the SELECT (B) button to reset. After this step, there is no need to set it again. If you need to reset it, long press the SET (C) button to proceed to the first step of setting.
- Time Setting:
- In the working state, long press the TIME/LIGHT (D) button to start setting the time.
- First, set the hour. Click the SELECT (B) button to decrease, and click SET (C) to increase.
- Click the TIME/LIGHT (D) button again to set the minute. Click the SELECT (B) button to decrease, and click SET (C) to increase.
- Click the TIME/LIGHT (D) button again to complete the settings.
3. Operating Instructions
3.1. Background Light Setting
In working mode, click the TIME/LIGHT (D) button to turn on the backlight. Click the TIME/LIGHT (D) button again to turn it off. Without any operation, the background light will automatically turn off in 20 seconds. When the rotary rocker arm background light is turned on, it will automatically turn on.
3.2. Residual Line Clearing Setting
When casting the bait, the screen will display the outgoing line distance. When the wire collection is completed, there is still remaining length on the screen. Long press the SELECT (B) button to clear the number of meters out of the line.
3.3. Fish Alarm (Zhongyu Alarm) Function
Before using the alarm function, first turn on the Wire Release Switch (E), then adjust the Fine Adjustment Knob (F). Make the fishing line easy to pull out, then turn on the alarm switch to use this function.
- Click the SET (C) button. When the screen displays the fish icon, it means the alarm function is turned on. When the fish pulls the fishing line, the screen starts flashing.
- Click the SET (C) button again to close the alarm.
3.4. Depth Positioning Function (Deep Memory)
When the bait reaches the desired depth, single click the SELECT (B) button. This will activate the depth positioning memory function (it can only be activated if the depth is greater than 1M). At this point, the screen displays depth data for positioning, indicating that the depth memory has been turned on, and the system will record the current depth. When the bait is retracted and the line is released again to reach the memory depth, a beep alarm sound will be emitted. To prompt to reach the positioning depth, press the SELECT (B) button again to turn off the Deep Memory function.
3.5. Wire Disconnection Clearing Function
During the fishing process, if the fishing line breaks, rotate the rocker arm to retrieve the remaining fishing line. At the same time, long press the ON/OFF (A) button, and the system can automatically clear the length of the lost fishing line and save the current remaining length.
3.6. Progress Bar for Line Collection
The progress bar on the display follows when collecting the fishing line. The rotational speed of the rocker arm increases and then rises. The faster the speed, the higher the progress bar.
3.7. Temperature and Pressure Display
The reel provides real-time display of temperature and air pressure, allowing you to monitor environmental factors for improved fishing efficiency.
4. Maintenance
To ensure the longevity and optimal performance of your SAMOLLA Electronic Fishing Reel, follow these maintenance guidelines:
- Cleaning: After each use, especially in saltwater environments, rinse the reel thoroughly with fresh water. Wipe it dry with a soft cloth. Avoid using harsh chemicals or abrasive materials.
- Lubrication: Periodically apply a small amount of fishing reel oil to moving parts and grease to gears as recommended by general fishing reel maintenance practices. Do not over-lubricate.
- Storage: Store the reel in a dry, cool place away from direct sunlight and extreme temperatures. Ensure the line is not under tension during storage.
- Charging: Regularly charge the reel using the provided USB Type-C cable or utilize the solar charging feature. Avoid completely draining the battery for extended periods.
5. Troubleshooting
5.1. Low Voltage Alarm

If the display shows a low battery icon (as shown in Figure 2) during use, it indicates a low voltage reminder. If the power is less than 1/4, or if the screen figures appear blurred, please charge or replace the battery in time.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | SAMOLLA |
| Model | KX1200 |
| Fishing Reels Type | Baitcast Reel, Electric Count Wheel, Jigging Reel |
| Fishing Method | Bait Casting |
| Position | Ocean Boat Fishing, Ocean Rock Fishing, Ocean Beach Fishing, LAKE, Reservoir Pond |
| Gear Ratio | 6.3:1 |
| Weight (Product) | 295g |
| Max Drag | 16kg |
| Line Capacity | 0.23mm/330m, 0.28mm/230m |
| Charging | Solar + USB Type-C |
| Material | CNC Aluminum Alloy Spool, Stainless Steel Base, Brass Gear |
| Origin | Mainland China |
7. User Tips
- Battery Life: The reel's battery is long-lasting, showing minimal drain even after several hours of continuous fishing.
- Depth Setting Hint: The depth setting is typically activated when the bite alarm mode is turned on.
- Alarm Sound: The alarm sound is similar to that of an electronic watch.
- Line Winding Accuracy: The reel provides accurate measurements for line winding and depth release, matching external measurements.
- Line Compatibility: The reel works well with various braided lines, including thin weaving.
8. Warranty and Support
For any warranty claims, technical support, or inquiries regarding your SAMOLLA Electronic Fishing Reel, please contact the seller or manufacturer directly. Retain your proof of purchase for warranty validation.
9. Safety Information
- Always handle fishing equipment with care.
- Keep the reel away from children when not in use.
- Avoid exposing the reel to extreme temperatures or corrosive substances.
- Ensure the reel is properly mounted and secured before casting.
- Do not attempt to disassemble the reel beyond routine maintenance, as this may void the warranty and cause damage.