1. Introduction
Thank you for purchasing the XK913 3.5CH RC Helicopter. This remote-controlled helicopter is designed for ease of use, making it suitable for beginners and children aged 6 and above. It features a durable, fall-resistant design, cool lighting effects for night flying, and stable flight characteristics thanks to its precision gyroscope. Please read this manual thoroughly before operating the helicopter to ensure safe and enjoyable use.
Video: Demonstrating the XK913 RC Helicopter's flight capabilities and lighting features.
2. Safety Warnings
- Age Restriction: Not suitable for children under 36 months due to small parts. Recommended for ages 6+.
- Supervision: Always operate under adult supervision, especially for younger users.
- Environment: Fly in open, clear areas, away from people, animals, obstacles, and water. Avoid flying in strong winds (Anti-wind Ability: Level 2).
- Battery Safety: Do not short-circuit, overcharge, or expose batteries to extreme temperatures. Use only the provided USB charging cable.
- Propellers: Keep fingers, hair, and loose clothing away from rotating propellers.
- Impact: While fall-resistant, excessive impact can cause damage. Inspect the helicopter for damage after any crash.
- Remote Control Batteries: Ensure correct polarity when installing AAA batteries in the remote control. Do not mix old and new batteries.
3. Package Contents
Please check the package to ensure all items are present:
- RC Helicopter (1)
- Remote Controller (1)
- USB Charging Cable (1)
- Screwdriver (1)
- Operating Instructions (1)

Image: Contents of the XK913 RC Helicopter package.
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | XK913 |
| Type | HELICOPTER |
| Material | Metal, Plastic (Durable ABS + electronic components) |
| Control Channels | 3.5 Channels |
| Remote Control Mode | Infrared |
| Remote Distance | 15 meters |
| Helicopter Dimensions | 21 x 3.5 x 10.5 cm (8.27 x 1.38 x 4.13 inches) |
| Drone Weight | 75g |
| Takeoff Weight | 80g |
| Body Battery | 3.7V 170MAH Li-poly (Lithium Battery) |
| Is Batteries Included | Yes (for helicopter) |
| Charging Time | 50 minutes |
| Flight Time | 8-10 minutes |
| Motor Type | Brush Motor |
| Controller Battery | 3*AAA (not included) |
| Controller Mode | MODE1, MODE2 |
| State of Assembly | Ready-to-Go |
| Features | App-Controlled (Note: This feature is mentioned in product properties but not detailed in other descriptions. May refer to general smart device control, not a specific app for this model), Cool Lighting, High Stability, Fall Resistance, Strong Handling Performance, Imported Gyroscope, Wireless Remote Control. |
| Anti-wind Ability | Level 2 |
| Indoor/Outdoor Use | Indoor-Outdoor |
| Video Capture Resolution | Other (No Aerial Photography) |

Image: Dimensions of the XK913 RC Helicopter.

Image: Detailed product parameter information.
5. Setup Guide
5.1. Charging the Helicopter Battery
- Locate the USB charging cable included in the package.
- Connect the small end of the USB cable to the charging port on the helicopter.
- Connect the larger end of the USB cable to a standard USB power source (e.g., computer USB port, USB wall adapter).
- The charging indicator light (if present) will show the charging status. Charging typically takes approximately 50 minutes.
- Once fully charged, disconnect the helicopter from the USB cable. Do not overcharge.

Image: USB charging cable for the helicopter.
5.2. Installing Remote Control Batteries
- Locate the battery compartment on the back of the remote control.
- Use the included screwdriver to open the battery compartment cover.
- Insert three (3) AAA batteries (not included) into the compartment, ensuring correct polarity (+/-).
- Replace the battery compartment cover and secure it with the screw.

Image: Remote control layout and battery requirement.
5.3. Pairing the Helicopter and Remote Control
- Ensure both the helicopter and remote control are powered off.
- Place the helicopter on a flat, level surface.
- Turn on the helicopter's power switch. The helicopter's lights may flash.
- Turn on the remote control's power switch. The remote control's indicator light will flash.
- Move the left joystick (throttle) all the way up, then all the way down. The remote control and helicopter lights should stop flashing and become solid, indicating successful pairing.
- The helicopter is now ready for flight.
6. Operating Instructions
6.1. Remote Control Functions

Image: Remote control analysis instructions.
- Left Joystick (Up/Down): Controls throttle. Push up to ascend, pull down to descend.
- Right Joystick (Left/Right Turn): Controls yaw (rotation). Push left to turn left, push right to turn right.
- Left Turn Fine Adjustment: Adjusts left rotation trim.
- Right Turn Fine Adjustment: Adjusts right rotation trim.
- Power Switch: Turns the remote control on/off.
- Switch Indicator: Shows remote control status.
6.2. Basic Flight
- Take-off: Slowly push the left joystick (throttle) upwards. The helicopter will ascend.
- Hovering: Adjust the left joystick to find the sweet spot where the helicopter hovers stably. Use the fine adjustment buttons if the helicopter drifts.
- Directional Control: Use the right joystick to turn the helicopter left or right.
- Landing: Slowly pull the left joystick (throttle) downwards. The helicopter will descend gently. Reduce throttle completely upon landing.
The helicopter features a precision gyroscope stabilization chip for stable and lightweight flight, making it easy to operate for beginners.
6.3. Special Features
- Cool Lighting: The helicopter is equipped with headlights and tail lights that illuminate, making it visible and exciting to fly at night.

Image: Helicopter with cool night lights.

Image: Environmentally friendly paint and LED night navigation lights.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the helicopter. Do not use water or chemical cleaners.
- Storage: Store the helicopter and remote control in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the remote control if not used for extended periods.
- Propeller Inspection: Regularly check propellers for any damage or cracks. Replace damaged propellers immediately to ensure safe flight.
- Battery Care: Do not leave the helicopter battery fully discharged for long periods. Charge it periodically if not in use.

Image: Reinforcing screw and fall-resistant material for durability.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Helicopter does not respond to remote control. | 1. Remote control batteries are low or incorrectly installed. 2. Helicopter battery is low. 3. Not paired correctly. | 1. Replace remote control batteries, check polarity. 2. Charge helicopter battery fully. 3. Re-pair the helicopter and remote control (see Section 5.3). |
| Helicopter drifts during flight. | 1. Trim settings need adjustment. 2. Flying in windy conditions. | 1. Use the fine adjustment buttons on the remote control to correct drift. 2. Fly in calm indoor conditions or outdoors with minimal wind. |
| Helicopter does not take off or has weak lift. | 1. Helicopter battery is low. 2. Propellers are damaged or obstructed. | 1. Charge helicopter battery fully. 2. Inspect propellers for damage or debris; replace if necessary. |
| Lights are not working. | 1. Helicopter battery is low. 2. Damage to LED components. | 1. Charge helicopter battery fully. 2. Contact customer support if lights remain non-functional after charging. |
9. User Tips
- Spare Parts: If you require replacement parts, such as a rear propeller, please contact the seller or manufacturer for availability and correct sizing.
- Dimensions: Always confirm the helicopter's dimensions (21x3.5x10.5cm) to ensure it meets your expectations for size.
- Beginner Practice: Start flying in a large, open indoor space to get accustomed to the controls before attempting outdoor flights.
10. Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the seller directly through your purchase platform. Keep your proof of purchase for warranty validation.