Wancle M800C

Contents

Wancle M800C Sous Vide Cooker User Manual

Model: M800C | Brand: Wancle

1. Introduction

The Wancle M800C Sous Vide Cooker is a precision immersion circulator designed to help you achieve professional-quality cooking results at home. This device allows for accurate temperature control, ensuring perfectly cooked meals without the risk of overcooking. It is suitable for a wide range of foods, including meats, fish, vegetables, and eggs.

Our superior technology lets you lock in flavor, retain more nutrients, and create tender, restaurant-style dishes right from your kitchen. Achieve chef-like results with half the effort and minimal monitoring with precision-control technology. Wancle Sous Vide technology preserves more nutrients and vitamins in your foods than other methods of cooking with no additional oils or fats required for flavoring. Plus, Sous Vide cooking is the meal prepper's ultimate dream for batch cooking delicious, nutritious food.

This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your Wancle M800C Sous Vide Cooker. Please read it thoroughly before first use and keep it for future reference.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in fire, electric shock, or injury.

  • This appliance is intended for household or commercial cooking applications in kitchens, food prep areas, and staff areas in hotels, motels, and residential environments.
  • Children aged 12 and above may use this appliance under supervision and instruction regarding safe use, provided they understand the hazards involved. Cleaning and maintenance should only be performed by adults. Keep the appliance and its cord out of reach of children under 12 years of age.
  • Persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, may use this appliance if they are supervised or instructed on safe use and understand the associated hazards.
  • Children must not play with the appliance.
  • Do not immerse the entire system. Only the stainless steel skirt and pump housing are designed to be submerged.
  • Unplug the device from the outlet when not in use and before cleaning.
  • Place the cooking container on a heat-resistant surface. Countertops made of materials like marble or Corian may not withstand the heat generated by the circulator.
  • Burn Hazard: The stainless steel portion of the circulator and food pouches can become very hot. Always use oven mitts or tongs when handling. Allow the system to cool before emptying the water.
  • Do not use extension cords. Only use properly grounded electrical outlets. Never operate with a damaged cord or plug.
  • Do not disassemble the appliance. Observe all warning labels and do not remove them.
  • If the supply cord becomes damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard.
  • Do not use this appliance for any purpose other than its intended use.
  • Always firmly lock the circulator onto the bath tank with the clamp. Place the container on an even surface to prevent spills and tipping over. Do not place the unit on a stove or in an oven.
  • DO NOT USE DEIONIZED WATER (DI water).
  • If your circulator falls into water, immediately disconnect power to avoid electric shock. Do not retrieve the unit until the cord is unplugged. If this occurs, send the system for repair (water damage is not covered by warranty). Do not attempt to use the system if it has been submerged.
  • This system is an indoor appliance and is not a toy.
  • This product cannot be used abroad. Products with electrical plugs are designed for use in the US (110V-120V) or EU (220V-240V). Outlets and voltage differ internationally, and this product may require an adapter or converter for use in other destinations. Please check compatibility before purchasing.

3. Product Components

Familiarize yourself with the parts of your Wancle Sous Vide Cooker:

Diagram of Wancle Sous Vide Cooker components
Figure 3.1: Wancle Sous Vide Cooker Components
This diagram highlights key parts including the Touch Control Display, MAX/MIN Water Level indicators, One-Handed Operation Clip, Removable Stainless Steel Tube, and Efficient Water Circulator.
  • The Body: The main housing of the device.
  • Operation Panel / Touch Control Display: Features an LED screen for temperature and time display, along with control buttons.
  • Water Level Sensor: Detects the water level in the cooking container.
  • Temperature Sensor: Measures the water temperature.
  • Heater: Warms the water to the desired temperature.
  • Agitating Blade / Efficient Water Circulator: Ensures even heat distribution throughout the water bath.
  • Fixed Clamp / One-Handed Operation Clip: Secures the device to the side of your cooking pot.
  • Stainless Steel Body / Removable Stainless Steel Tube: The submersible part of the device, housing the heater and circulator.
  • Bottom: The base of the stainless steel tube.
Detailed view of the Wancle Sous Vide Cooker control panel
Figure 3.2: Control Panel Details
The control panel features a Temperature Display, Time Display, Decrease Button (-), Setting Button (gear icon), Increase Button (+), and On/Off Button (play/pause icon).

4. Setup

  1. Prepare Your Pot: Select a pot or container with a depth of more than 12 cm. Place it on a flat, heat-resistant surface.
  2. Attach the Sous Vide Cooker: Hold the product, open the fixed clamp by hand, and securely attach the circulator to the edge of the pot. Ensure it is placed vertically.
  3. Add Water: Fill the pot with water. Ensure the water level is between the MIN and MAX lines indicated on the stainless steel body of the circulator.
  4. Prepare Food: Place your food ingredients into a vacuum-sealable bag. For meat, it is recommended to salt and season first. Use a vacuum machine to remove air and seal the bag.
  5. Plug In: Plug the product power cord into a suitable electrical socket. The product will power on, and the LED light will turn red.
Wancle Sous Vide Cooker attached to a pot in a kitchen setting
Figure 4.1: Sous Vide Cooker Setup
The image shows the Wancle Sous Vide Cooker securely clamped to a pot, ready for cooking.
Four-step guide on how to use the Sous Vide Cooker
Figure 4.2: Quick Start Guide
A visual guide illustrating the four basic steps: 1. Add food in a sealed bag. 2. Attach Sous Vide to any pot. 3. Cook with built-in controls. 4. Flavor and enjoy your meal.

5. Operation

5.1 Water Level Management

  • Always ensure the water level in the pot is maintained between the MIN and MAX lines on the stainless steel body.
  • If the water level falls below the MIN line, the LED light will show red, and the product will not start or will stop working during cooking. An alarm ("beep beep beep") will sound. Add water to the pot to resume operation.

5.2 Temperature Setting

  1. With the product powered on (LED is red), press the Setting Button (gear icon) on the control panel. The temperature will be displayed on the screen.
  2. Use the Increase Button (+) to raise the temperature and the Decrease Button (-) to lower it. Each press adjusts by 0.1°C/°F.
  3. Press and hold the Increase Button (+) or Decrease Button (-) for rapid adjustment.
  4. To switch between Celsius (°C) and Fahrenheit (°F), long press the Setting Button for 3 seconds.
  5. Temperature Setting Range: 25-90°C (77-194°F).
Sous Vide cooking temperature guide for different doneness levels of steak
Figure 5.1: Steak Doneness Temperature Guide
This guide provides recommended temperature ranges for achieving various doneness levels for steak: Rare (125.6°F-131°F), Medium Rare (131°F-140°F), Medium (140°F-149°F), Medium Well (149°F-156.2°F), and Well Done (159.8°F-194°F).

5.3 Time Setting

  1. After setting the desired temperature, press the Setting Button again. The display will switch to time setting mode.
  2. Use the Increase Button (+) and Decrease Button (-) to set the cooking time. Each press adjusts by 1 minute.
  3. Press and hold the Increase Button (+) or Decrease Button (-) for rapid adjustment (jumps in 30-minute increments).
  4. Time Setting Range: 0 hours 1 minute to 99 hours 59 minutes.

5.4 Starting and Stopping the Machine

  1. Once both temperature and time are set, press the On/Off Button (play/pause icon) on the control panel to start the machine.
  2. The machine will emit a "beep" sound, and the LED light will change from red to blue, indicating that heating and water circulation have begun.
  3. When the water temperature is 2 degrees away from the set temperature, the machine will beep twice.
  4. When the water reaches the set temperature, the machine will emit a "beep beep beep" sound. At this point, the machine enters a heat preservation state, maintaining the temperature with an amplitude of 0.1 degree.
  5. Carefully place your vacuum-sealed food bag into the water bath.
  6. After the set cooking time is over, the machine will stop working and enter standby mode. The LED on the operation panel will turn red, and the heating time will reset to zero.
  7. To manually turn off the device, press and hold the On/Off Button for three seconds.

CAUTION: After cooking, do not touch the stainless steel part of the machine by hand to avoid scalding.

6. Maintenance

6.1 Removing the Stainless Steel Body for Cleaning

  1. Before any maintenance or cleaning, ensure the power plug is unplugged from the electrical outlet.
  2. Hold the main body of the machine with one hand.
  3. Rotate the stainless steel body to the left with the other hand to release it.
  4. Slowly pull the stainless steel body downwards and remove it. If the stainless steel body is stuck due to the mixing fan blade, gently swing it left and right while pulling to gradually remove it.
Diagram showing internal components of the Wancle Sous Vide Cooker
Figure 6.1: Internal Components for Cleaning
This diagram illustrates the internal components, including the heating element and circulator, which become accessible after removing the stainless steel body for cleaning.

6.2 Washing and Cleaning

  • Use a soft brush or cloth to wash and clean the stainless steel body, heating part, and plastic base with water.
  • For stubborn dirt, use a neutral detergent, then rinse with water and air dry.
  • Do not wash with electricity.
  • Do not use bleaching chemicals or other corrosive substances.
  • Do not place the entire machine in a dishwasher.

6.3 Descaling (Monthly Cleaning)

If you use the machine frequently, it is recommended to clean it once a month to prevent mineral buildup:

  1. Fix the machine in a pot with the clamp and add water up to the MAX line.
  2. Set the machine's temperature to 70°C (158°F) for 20 minutes.
  3. Add citric acid powder (food grade) or white vinegar to the pot. Use a proportion of 5g citric acid powder per liter of water.
  4. Once the machine heats to 70°C, maintain this temperature for 20 minutes, allowing the water to circulate.
  5. After 20 minutes, turn off the machine and unplug it.
  6. Clean the stainless steel body and heating pipe again with clean water.
  7. Dry the machine with a soft towel.

7. Troubleshooting

If you encounter any abnormalities during use, refer to the table below for possible solutions. If the problem persists, please contact customer support.

Situation Possible Cause Dealing Method
The machine is not powered (no display on the operation panel). Power supply not properly plugged in, or power cord/plug is damaged. Insert the power supply correctly. If the power cord is damaged, repair or replace it before plugging in.
The machine cannot be started; the operation panel displays red and emits "beep beep beep" sounds. Water level in the pot is below the MIN line of the stainless steel body. Add enough water to the pot, ensuring the water level is between the MIN and MAX lines.
The machine stops during heating and emits "beep beep beep" sounds; pressing the On button does not restart it. Water level in the pot is below the MIN line of the stainless steel body. Add enough water to the pot, ensuring the water level is between the MIN and MAX lines.
During the heating process, the machine emits "beep beep beep" sounds. 1. Water temperature is 2 degrees away from the set temperature. 2. Water temperature has reached the set temperature. This is a normal product program setting, not an abnormal situation.
After cooking is done, the machine emits "beep beep beep" sounds, the fan continues to work for one minute, and the operation panel turns red. 1. Reminder that the set cooking time is over. 2. Machine fan operates for one minute to cool down. 3. After one minute, the machine stops completely, and the panel changes from blue to red. This is a normal product program setting, not an abnormal situation.

WARNING: Do not disassemble or repair the machine on your own.

Note: If the cooked food has a peculiar smell or color, please do not eat it.

8. Specifications

Feature Specification
Model NumberM800C
Brand NameWancle
Power InputAC100V-120V / AC220V-240V, 50/60Hz (depending on plug type)
Product Power1100W
Minimum Water Level5.5 CM
Product Weight770g
Upper Body MaterialPC Plastic
Lower Body MaterialSUS 304 Stainless Steel
Cover of the Base MaterialPC Plastic
Maximum Capacity20L Max
Operating Ambient Temperature5~35°C
Temperature Setting Range25-90°C (77-194°F)
Temperature Accuracy±0.1°C / ±0.1°F
Time Setting Range0 Hour 1 Minute ~ 99 Hours 59 Minutes
Length of Power Cord1.1 M
Product Size (Diameter x Height)62mm x 340mm
Pumping Speed7-8 L/min
Control ModeMicrocomputer Control
LCD DisplayYes
FunctionDigital Timer Control
CertificationsCE, EMC, RoHS
Waterproof RatingIPX7

Product standards may be changed without notice.

Table showing different power plug types and suitable countries
Figure 8.1: Power & Plug Types
This table illustrates various plug types (US, AU, EU, UK) and the countries they are suitable for, along with their respective voltage ranges (100V-120V or 220V-240V). Please ensure you have the correct plug type or an appropriate adapter for your region.

9. User Tips

  • Temperature Display: The temperature readings are generally accurate, but expect a slight delay in the display updating to the exact current temperature.
  • Quiet Operation: The Wancle M800C operates quietly, making it suitable for use in various kitchen environments without excessive noise.
  • Secure Placement: Always use the integrated clamp to securely fix the circulator to the side of your cooking pot. This prevents wobbling and ensures stable operation.
  • Plug Compatibility: Verify the plug type and voltage compatibility for your region. An adapter may be required for international use.
  • Efficient Heating: The 1100W power ensures adequate and quick heating of the water bath.
  • Precise Control: The device offers precise temperature control with adjustments in 0.1° increments, allowing for fine-tuning of your cooking.
  • Waterproof Bags: While vacuum-sealed bags are recommended for optimal juice retention, any waterproof, food-safe bag can be used.
  • IPX7 Waterproof: The device is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. This ensures durability and safety.
  • Container Size: The circulator can be used with various container sizes. Be aware that larger containers will take longer to reach the desired temperature.
  • Reusable Bags: If using reusable bags, ensure they are thoroughly cleaned and sanitized between uses to prevent contamination.
  • Primary Use: Sous vide cooking is ideal for meats, fish, and vegetables. It is not designed for boiling pasta or high-temperature casseroles, as it operates at lower, precise temperatures.
  • Clear Display: The LED display features bright white numbers on a black background, offering excellent contrast and readability, even without glasses.

10. Warranty and Support

Please retain this instruction manual for future reference. To confirm your warranty, ensure the "Purchase Date" and "Dealer Name" sections are filled out by the dealer.

For further assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact:

  • Company: Dongguan Pinle Electronic Technology Co. Ltd.
  • Address: Tangxiadigongyelu, 11hao304shi, Dongguan, Guangdong, 523710, CN
  • E-Mail: support@wancle.net
  • Website: www.wancle.net

A digital version of this user manual is available as a PDF: Wancle M800C User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.