4DRC 4D-V46 PRO

Contents

4DRC V46 PRO Glider Flying Helicopter User Manual

Model: 4D-V46 PRO | Brand: 4DRC

1. Introduction

Thank you for choosing the 4DRC V46 PRO Glider Flying Helicopter. This advanced RC aircraft combines the agility of a drone with the sleek design of a fighter jet, offering an exciting and stable flight experience. Equipped with an 8K HD camera, optical flow positioning, and intelligent obstacle avoidance, the V46 PRO is designed for both beginners and experienced pilots. This manual provides essential information for safe operation, setup, and maintenance of your new aircraft.

2. Safety Information

  • WARNING: Not suitable for children under 36 months due to small parts.
  • Always operate the aircraft in open areas, away from people, animals, and obstacles.
  • Do not fly in strong winds (Anti-wind Ability: <10km/h) or adverse weather conditions.
  • Ensure batteries are fully charged and correctly installed before each flight.
  • Keep hands and face away from rotating propellers.
  • Do not modify or disassemble the aircraft or remote control.
  • Follow all local regulations regarding drone operation.

3. Package Contents

Please check the box to ensure all items are present:

  • 4DRC V46 PRO Glider Flying Helicopter
  • Remote Controller with Screen
  • Batteries (Lithium Battery, quantity may vary based on purchase option)
  • Camera (Integrated)
  • USB Charging Cable
  • Original Box
  • Propellers (spare set)
  • Screwdriver
Package contents for 4DRC V46 PRO drone, including drone, remote, battery, propellers, screwdriver, USB cable, and box.

Image: Contents of the 4DRC V46 PRO package, showing the drone, remote control, battery, spare propellers, screwdriver, USB charging cable, and product box.

4. Specifications

FeatureDetail
Product NameHigh definition aerial photography drone
Model Number4D-V46 PRO
Dimensions340 x 220 x 90mm (Aircraft)
MaterialMetal, Plastic, Foam (Durable EPP)
Aircraft Battery3.7V 1800mAh Lithium Battery
Charging Voltage3.7V
Charging TimeAbout 60-65 minutes
Flight TimeAbout 13-20 minutes
Remote Control DistanceAbout 500-1000m (up to 2 km for flight distance)
Controller Battery3*AAA Battery (not included)
Control Channels4 Channels
Controller ModeMODE1, MODE2
Camera Parameters8K HD Dual Camera (1080p FHD, 4K UHD, Other)
Video Capture Resolution1080p FHD, 4K UHD, Other
Flight SystemOptical flow visual localization
Signal Transmission5G
FeaturesIntegrated Camera, Obstacle Avoidance, Headless Mode, Altitude Hold, 360° Roll, One-Click Takeoff/Landing, Gesture Photo/Video, Trajectory Flight, Smart Following, Gravity Control, Smoke Pattern (Water Mist), Taxi Take-off, Speed Switching
Anti-wind Ability<10km/h
Operator Skill LevelBeginner
Indoor/Outdoor UseIndoor-Outdoor
Recommend Age14+y
Product parameter table and size diagram for 4DRC V46 PRO drone.

Image: Detailed product parameters and dimensions of the 4DRC V46 PRO drone.

5. Setup Guide

5.1 Battery Installation and Charging

  1. Aircraft Battery: Insert the 3.7V 1800mAh lithium battery into the designated compartment on the drone. Ensure it clicks securely into place.
  2. Charging: Connect the aircraft battery to the USB charging cable. Plug the USB cable into a suitable USB power source (e.g., computer, USB wall adapter). The charging time is approximately 60-65 minutes. Do not overcharge.
  3. Remote Controller Battery: Open the battery compartment on the back of the remote control. Insert 3 AAA batteries (not included), ensuring correct polarity. Close the compartment.
Modular battery being inserted into the drone.

Image: Illustration of the modular battery for the 4DRC V46 PRO drone.

5.2 Remote Control Overview

The remote control features a built-in LCD screen for dual-mode viewing and real-time image transmission. Familiarize yourself with the controls:

Diagram of the remote control for the 4DRC V46 PRO drone, showing button functions.

Image: Remote control diagram with labeled buttons for functions like accelerate, left joystick, lens adjustment, obstacle avoidance, headless/heading back, flip up/flip down, switch circle, take off/landing, scram/calibration, short press recording, and memory card slot.

  • Left Joystick: Controls altitude (up/down) and rotation (left/right).
  • Right Joystick: Controls forward/backward and left/right movement.
  • One-Key Takeoff/Landing Button: Initiates automatic takeoff or landing.
  • Headless Mode Button: Activates headless flight mode.
  • Obstacle Avoidance Button: Toggles the obstacle avoidance feature.
  • Photo/Video Button: One-click photo/video capture.
  • Speed Switch Button: Adjusts flight speed.
  • 360° Roll Button: Executes a 360-degree flip.
  • Lens Adjustment: Adjusts camera angle.
  • Memory Card Slot: Insert a memory card for storing aerial footage.

5.3 App Installation and Connection

For advanced features and real-time viewing, download the official 4DRC app on your smartphone.

  1. Scan the QR code in the product packaging or search for the "4DRC" app in your device's app store.
  2. Install the app.
  3. Turn on the drone and the remote control.
  4. On your smartphone, connect to the drone's Wi-Fi network (usually named "4DRC-XXXXXX").
  5. Open the 4DRC app. You should see a live feed from the drone's camera.
Remote control with phone attached, showing dual mode viewing via LCD and mobile app.

Image: Remote control with a smartphone mounted, demonstrating dual-mode viewing on both the remote's LCD and the mobile app.

6. Operating Instructions

6.1 Basic Flight

  1. Power On: Turn on the drone and then the remote control. The indicator lights will flash.
  2. Pairing: Push the left joystick up and then down. The indicator lights will become solid, indicating successful pairing.
  3. Calibration: Place the drone on a flat surface. Press the "Scram/Calibration" button (refer to remote diagram) to calibrate the gyroscope.
  4. Takeoff:
    • One-Key Takeoff: Press the One-Key Takeoff/Landing button. The drone will automatically ascend and hover.
    • Manual Takeoff: Push both joysticks diagonally outwards and down to start the motors. Then gently push the left joystick up to ascend.
    • Taxi Take-off: Place the aircraft on a horizontal surface. Push the right lever long, and the aircraft will glide close to the ground for some distance and then take off.
  5. Landing: Press the One-Key Takeoff/Landing button again for automatic landing, or gently pull the left joystick down to descend manually.

Video: Demonstration of various flight features including one-key takeoff, altitude hold, one-click flips, real-time transmission, obstacle avoidance, and one-key landing.

Drone performing a taxi take-off from a flat surface.

Image: Instructions for performing a taxi take-off.

6.2 Advanced Features

  • Altitude Hold Mode: The drone will automatically maintain its current altitude, allowing for stable hovering.
  • Headless Mode: In headless mode, the drone's orientation is relative to the pilot, making it easier to control without worrying about the drone's front direction.
  • 360° Laser Obstacle Avoidance: When activated, the drone will automatically detect and avoid obstacles in its path, enhancing flight safety.
  • 360-Degree Roll: Press the 360° Roll button and move the right joystick in any direction to perform an acrobatic flip.
  • Dual Camera System: The 8K HD dual cameras allow for versatile shooting. Switch between horizontal, vertical, and overhead perspectives via the app or remote.
  • Real-time Image Transmission: View live footage from the drone's camera on your remote control screen or connected smartphone via the app.
  • Gesture Recognition Photography/Video: Use specific hand gestures to trigger photo or video recording.
  • Trajectory Flight: Draw a path on your smartphone screen, and the drone will automatically follow the designated route.
  • Smart Following: The drone can automatically follow a designated subject, ideal for capturing dynamic footage.
  • Gravity Control: Control the drone's movement by tilting your smartphone (via the app).
  • Smoke Pattern (Water Mist): Activate the "smoke pattern" feature to simulate a jet's tail flame by spraying water mist. Open the tail and add water to the designated reservoir.
Image showing various advanced flight functions like headless mode, trajectory flight, one-click takeoff/landing, speed switching, and 360-degree roll.

Image: Visual guide to advanced flight functions including headless mode, trajectory flight, one-click takeoff/landing, speed switching, and 360-degree roll.

Drone demonstrating omnidirectional obstacle avoidance.

Image: The drone's omnidirectional obstacle avoidance system in action, sensing and avoiding objects.

Drone spraying water mist from its tail to simulate a jet flame.

Image: The drone's "one-click sends smoke" feature, simulating a tail flame with water mist.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the drone and remote control. Do not use harsh chemicals or solvents.
  • Propellers: Regularly check propellers for damage. Replace any bent or broken propellers with new ones using the provided screwdriver.
  • Battery Care:
    • Store batteries in a cool, dry place.
    • Do not leave batteries fully discharged for extended periods.
    • If not used for a long time, charge the battery to about 50% every 3 months.
  • Storage: Store the drone and accessories in their original packaging or a protective case when not in use to prevent damage.

8. Troubleshooting

ProblemPossible CauseSolution
Drone does not respond to remote.Not paired, low battery, out of range.Ensure drone and remote are powered on and paired. Charge batteries. Fly within range (500-1000m).
Drone drifts during flight.Not calibrated, strong wind.Perform gyroscope calibration on a flat surface. Avoid flying in windy conditions.
Poor camera image quality or no live feed.Weak Wi-Fi signal, app not connected, dirty lens.Ensure strong Wi-Fi connection to the drone. Reconnect app. Clean camera lens.
Obstacle avoidance not working.Feature not activated, sensor obstruction.Ensure obstacle avoidance is enabled via remote. Check sensors for dirt or damage.
Water mist feature not working.No water in reservoir, clogged nozzle.Refill water reservoir. Check for and clear any blockages in the nozzle.

9. User Tips

  • For optimal flight stability, always calibrate the drone on a flat surface before takeoff.
  • Practice basic controls in an open, clear area before attempting advanced maneuvers or flying indoors.
  • Utilize the headless mode when you are still getting accustomed to the drone's orientation.
  • Experiment with the dual camera angles to capture unique aerial perspectives.
  • Remember to insert a memory card into the remote control to save your high-quality photos and videos directly.
  • The EPP foam material is durable, but avoid crashing into hard surfaces to prolong the drone's lifespan.

10. Warranty and Support

For any issues, questions, or support needs regarding your 4DRC V46 PRO Glider Flying Helicopter, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims. Specific warranty terms and conditions may vary by region and seller.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.