1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Dooya Smart Electric Curtain Motor DT82TV. This smart motor system offers advanced control options including RS485, Dry Contact, and RF433, allowing for automated and convenient curtain management. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Package Contents
Please verify that all items listed below are included in your package:
- 1x DT82TV Electric Curtain Motor (2023 new version, roll codes)
- 1x 433MHZ Remote Controller DC2700A (battery not included due to shipping limitations)
- 1x Customized Curtain Track Set (shipped as Ceiling Mounted, straight track, Middle Open by default. For side wall mounting, side brackets must be purchased separately.)
- Necessary accessories: runners, slip parts assembly, ceiling brackets.

3. Specifications
| Feature | Specification |
|---|---|
| Product | Curtain Motor |
| Model Number | DT82TV /NAC-1.2/14 |
| Brand Name | Dooya |
| Rated Voltage | AC 220V~ |
| Rated Torque | 1.2Nm |
| Rated Speed | 100r/min |
| Moving Speed | 14cm/s |
| Protection Class | IP40 |
| Heat Class | A |
| Max Current | 0.3A |
| Wireless Communication | RF (RF433) |
| Control Methods | RS485, Dry Contact, RF433 |
| Power Source | DC |
| Battery Included | No |
| Inbox Adaptor | No |
| Material | High Quality Aluminum-magnesium alloy |
| Sliding Device | General pulley |
| Available Window Types | All window types (135 degree U type/90 degree L type) |
| Origin | Mainland China |
| Certification | NONE |


4. Safety Information
This product has undergone EU conformity assessment and complies with the following directives:
- Low Voltage Directive 2014/35/EU (LVD)
- Electromagnetic Compatibility Directive 2014/30/EU (EMC)
- Restriction of Hazardous Substances Directive 2011/65/EU (RoHS)
- General Product Safety Regulation (GPSR)
This product meets the requirements of electrical safety, electromagnetic compatibility, and environmental compliance. The EU Declaration of Conformity (DoC) is issued and technical documentation is kept by the EU Authorized Representative for inspection.
Environmental Note
This product complies with EU RoHS. Do not dispose of it as household waste. Please recycle it in accordance with local regulations for waste electrical and electronic equipment.
5. Installation
5.1. Track Measurement
Accurate measurement is crucial for proper track installation. Refer to the diagrams below for different scenarios:
- For windows not extending to a full wall: Measure the window width (A) and add 60CM (A + 60CM) for the total track length.
- For full wall installations: Measure the wall length (A) and subtract 4CM (A - 4CM) for the total track length.




5.2. Dimensional Measurement for Various Track Types
For linear, rectangular, and ladder tracks, follow the specific measurement guidelines:

5.3. Track Splicing and Assembly
The curtain track may require splicing and assembly. Ensure all slip parts are installed before operating the track. Do not install the motor until the track can be operated smoothly manually, otherwise, the belt may be damaged.
Video 5.1: Demonstration of track splicing and assembly. This video is for reference on installation steps.

5.4. Mounting Types
The track can be installed in various ways to suit your window and room design:
- Ceiling Mounting: This is the default shipping configuration.
- Side Wall Mounting: Requires additional side brackets, which must be purchased separately.


5.5. Window Types and Curtain Opening Methods
The system is suitable for various window types and curtain opening configurations:
- Window Types: A Line, "U" Shape, "L" Shape, Trapezoid. For "U"-shaped and trapezoidal windows, installation is suitable at the center point as shown in diagrams.
- Curtain Opening Methods: Single open (from left to right or right to left) or Double open (from two sides to center or from center to two sides).



5.6. Motor Placement
The motor can be positioned on either the left or right side of the curtain track, depending on your preference and power outlet location.


6. Operation
6.1. Control Methods
Your Dooya DT82TV motor supports multiple control interfaces:
- RF433 Remote Control: Use the included DC2700A remote controller to operate the curtains wirelessly.
- RS485 Interface: For integration into advanced home automation systems.
- Dry Contact Interface: Allows for simple switch control.
- Voice Control: When connected to a compatible smart curtain switch (e.g., supporting Google Home or Amazon Alexa), you can control your curtains using voice commands.



6.2. Key Features
- Slow Start and Slow Stop: Ensures smooth and quiet operation, enhancing the elegance of your curtains.
- Light Touch-start Function: A gentle pull on the curtain will trigger the motor to automatically open or close.
- Resistance and Stop Function: The motor will automatically stop if it encounters resistance while opening or closing, protecting the curtain from damage.
- Power Off Manual Operation: In case of a power outage, the curtains can still be opened or closed manually by pulling them.
- Electronic Stroke Memory: The motor remembers the open and close limits, ensuring consistent operation.
- Timing Setting: Curtains can be set to open and close automatically at specific times (requires a smart curtain switch).






7. User Tips
- Always install the slip parts assembly before operating the track.
- Ensure the track moves smoothly manually before installing the motor to prevent belt damage.
- If you require a "U" type or "L" type curtain track, please contact the seller for customization.
- This track system is compatible with other Dooya motors (KT82/DT82 TN/TV/LE) and Xiaomi curtain motors.
- For smart features like timing and voice control (Alexa/Google Home), a compatible smart curtain switch is required.
8. Troubleshooting
8.1. Track Not Moving Smoothly
If the track does not move smoothly manually before motor installation, check for any obstructions or misaligned parts in the slip parts assembly. Ensure all components are correctly fitted and lubricated if necessary.
8.2. Motor Belt Damage
Installing the motor before ensuring smooth manual track operation can lead to belt damage. If the belt is damaged, it may need replacement. Always test the track manually first.
8.3. Remote Control Not Responding
Check if the remote controller's battery is installed and functional. Ensure the remote is paired correctly with the motor. Refer to the remote control's specific instructions for pairing procedures.
8.4. Smart Features Not Working
For voice control (Alexa, Google Home) or timing functions, ensure you have a compatible smart curtain switch installed and correctly configured. Verify network connectivity for smart devices.
9. Warranty and Support
Manufacturer Information
Name: Lumi United Technology Co., Ltd.
Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China
Telephone: +86-18589043609
EU Authorized Representative
Name: Sophie Bennett
Address: 9 rue du Bat d'Argent, 69001 Lyon, France
Telephone: +33-774555006
For technical support or warranty claims, please contact the manufacturer or the EU authorized representative using the details provided above.