Cloudray Easymarker-FM1 Fiber Laser Marking Machine User Manual

1. Safety Information

The Cloudray Easymarker-FM1 is a Class 4 laser system. Proper safety precautions must be observed at all times to prevent injury.

1.1 General Safety Guidelines

• Always wear the provided laser safety goggles when operating the machine.
• Ensure the work area is clear of flammable materials.
• Never look directly into the laser beam or at reflections.
• Keep children and unauthorized personnel away from the machine during operation.
• Use the optional laser protective cover for enhanced safety, especially in shared environments.

2. Product Overview

The Cloudray Easymarker-FM1 is a portable fiber laser marking machine designed for fast and accurate engraving on various metal and non-metal materials. It is available in 30W and 50W configurations.

2.1 Key Features

• High Speed: Max marking speed of 10000 mm/s.
• High Accuracy: Achieves 0.01 mm accuracy.
• Marking Depth: Up to 0.5 mm.
• Working Area: Default 110x110 mm (4.3x4.3 in), customizable to 150x150 mm (5.9x5.9 in) or 175x175 mm (6.9x6.9 in) with different field lenses.
• Laser Type: Fiber laser with 1064 nm wavelength.
• Software Compatibility: Fully compatible with EZCAD2 (included) and Lightburn.
• Operating System: Supports Windows 7, 8, 10, and 11.
• Portable Design: Net weight approximately 12 kg.

3. Packing List

3.1 Standard Accessories

• Safety Goggles (1 pair)
• U Disk (containing manuals and software) (1)
• Foot Switch (1)
• Craft Kit (with screws) (1 set)
• Power Supply (1)
• USB Cable (1)

3.2 Optional Accessories

• Protective Cover
• Rotation Axis (for cylindrical objects)

4. Setup Guide

4.1 Unpacking and Initial Placement

Carefully remove the machine and all accessories from the packaging. Place the machine on a stable, level surface in a well-ventilated area.

4.2 Software Installation

Insert the provided U Disk into your computer. Install the EZCAD2 software. If using Lightburn, ensure it is installed and configured for your machine.

4.3 Hardware Connection

1. Connect the power supply to the machine and a suitable electrical outlet.
2. Connect the machine to your computer using the provided USB cable.
3. If using the foot switch, connect it to the designated port on the machine.

4.4 Focusing

The machine requires proper focusing for optimal marking quality. Adjust the height of the laser head until the red pilot laser dots converge into a single, sharp point on the material surface. Refer to the software interface for focus assistance.

4.5 Optional Accessories Setup

• Protective Cover: If you have the optional protective cover, install it according to its separate instructions to enclose the working area.
• Rotation Axis: For marking cylindrical objects, attach the rotation axis to the work platform and connect it to the machine's rotary port. Configure the rotary settings in your marking software.

5. Operating Instructions

5.1 Basic Marking Workflow

1. Design: Create or import your design using EZCAD2 or Lightburn software.
2. Positioning: Place the material on the work platform. Use the red pilot laser to preview the marking area and adjust the material position as needed. Positioning blocks can assist in repeatable placement.
3. Focusing: Ensure the laser is correctly focused on the material surface (refer to Section 4.4).
4. Parameter Settings: Adjust laser parameters (power, speed, frequency, pulse width) in the software based on the material and desired marking effect.
5. Start Marking: Initiate the marking process from the software. Monitor the process, ensuring safety goggles are worn.

5.2 Material Compatibility

The Easymarker-FM1 is suitable for marking a wide range of materials, primarily metals and some non-metals. Examples include:

• Metals: Steel, Aluminum, Copper, Gold, Platinum, Titanium, Stainless Steel.
• Non-metals: Certain plastics, ceramics, rock boards.

5.3 Working Area and Lenses

The machine supports different field lenses to achieve various working areas and marking depths:

• F-theta lens f=160mm: 110x110 mm working area.
• F-theta lens f=210mm: 150x150 mm working area.
• F-theta lens f=290mm: 175x175 mm working area.

Select the appropriate lens based on your project requirements for optimal results.

6. Maintenance

6.1 Routine Cleaning

• Regularly clean the machine's exterior with a soft, dry cloth.
• Ensure the work platform is free of debris and dust.

6.2 Lens Cleaning

Carefully clean the F-theta lens with a lens cleaning solution and a lint-free cloth to maintain optimal laser performance. Avoid touching the lens surface with bare hands.

6.3 Software Maintenance

Keep your EZCAD2 or Lightburn software updated to the latest version for best performance and compatibility.

7. Troubleshooting

If you encounter issues with your Easymarker-FM1, consider the following general troubleshooting steps:

• No Power: Check all power connections and ensure the power switch is on. Verify the power outlet is functional.
• Software Connection Issues: Ensure the USB cable is securely connected to both the machine and the computer. Restart the software and/or computer. Check device manager for proper driver installation.
• Poor Marking Quality: Verify the laser is correctly focused on the material. Adjust laser parameters (power, speed, frequency) for the specific material. Ensure the material surface is clean.
• Laser Not Firing: Check if the emergency stop button is disengaged. Ensure the software is sending the correct commands.

For persistent issues, refer to the contact information in the Support and Warranty section.

8. Technical Specifications

9. User Tips

• The laser source for the Easymarker-FM1 is a Fiber laser, known for its precision and longevity.
• Ensure proper focusing for optimal marking depth and clarity. An out-of-focus laser will result in blurry or weak marks.
• Always use the provided safety goggles during operation, and consider the optional protective cover for enhanced safety, especially in shared environments.
• For cylindrical objects, utilize the optional rotary axis for precise and consistent marking around the object's circumference.
• Experiment with laser parameters on scrap material before marking your final piece to achieve the desired effect.

10. Support and Warranty

10.1 Warranty Information

The Cloudray Easymarker-FM1 comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures the quality of all machine components. Technical support is available throughout the warranty period.

10.2 Contact Information

For technical assistance, troubleshooting, or any questions regarding your machine, please contact Cloudray support:

• Telephone: +86-17705182720
• WhatsApp: +86-17705182720
• Skype: +86-17705182720
• WeChat: 17705182720
• Email: service@cloudray.com