1. Introduction
The iradio UV-88 is a versatile multi-band handheld ham radio designed for extensive communication needs. It features a wide range of reception capabilities including AM, LSB, CW, CB, LW, MW, SW, and FM, alongside UHF and VHF transmission. With 1024 channels, GPS functionality, and a robust design, it is suitable for various outdoor and professional applications. This manual provides essential information for the safe and efficient operation of your UV-88 radio.

Figure 1: iradio UV-88 Walkie Talkie highlighting key features.
2. Package Contents
Please check the package carefully to ensure all items are present and in good condition:
- 1 x iradio UV-88 Radio
- 1 x Antenna
- 1 x Battery (2000mAh)
- 1 x Charger Base
- 1 x Belt Clip
- 1 x Type-C USB Cable
- 1 x Power Adaptor
- 1 x Lanyard
- 1 x User Manual
- 1 x Box

Figure 2: Standard package contents.
3. Product Overview
Familiarize yourself with the various parts of your UV-88 radio:

Figure 3: Labeled diagram of the UV-88 radio components.
- Antenna: For signal transmission and reception.
- SW/AM Antenna: Optional antenna for Shortwave and AM reception.
- Alarm Key: Activates alarm function.
- TX Key (PTT): Push-to-Talk button for transmitting.
- Key 1 & Key 2: Programmable function keys.
- Menu Key: Accesses the radio's menu system.
- Switch/Volume Knob: Powers the radio on/off and adjusts volume.
- Indicator Light: Shows radio status (e.g., transmitting, receiving, charging).
- Mic: Microphone for voice input.
- Headset Port: Connects external audio accessories.
- Type-C Charger Port: For charging the radio's battery.
- Keypads: For frequency input, channel selection, and menu navigation.
4. Specifications
Detailed technical specifications for the iradio UV-88:
| Feature | Specification |
|---|---|
| Brand Name | RONGYIN (iradio) |
| Model Number | UV-88 (Same Model: RT-860) |
| Walkie Talkie Type | Portable |
| Output Power (W) | 5W-10W |
| Battery Capacity (mAh) | 2000mAh |
| Waterproof / Water-Resistant | IP45 |
| Frequency Range | 27Mhz, 400-520MHz |
| Is Display | Yes |
| Maximum Range | 5km-10km |
| Modulation | AM/FM/SW/MW/LW/CB/SSB |
| Charging Method | Type-C Charger |
| GPS | YES (Note: GPS signal is blocked in Russia) |
| CB (RX) | 27MHz |
| FM (RX) | 64-108MHz |
| SW (RX) | 2.3-30MHz |
| MW (RX) | 520-1710KHz |
| LW (RX) | 153-279KHz |
| RX (Full Band) | 18-520MHz (AM/FM), 840-999MHz, 840-1000MHz (unlock) |
| TX/RX (VHF/UHF) | 136-174MHz, 400-480MHz |
| Channel Capacity | 1024 Channels + 2*VFO Channels |
| Channel Spacing | Analog: 25kHz/12.5kHz, Digital: 12.5K |
| Voltage | 7.4V DC |
| Working Mode | Same frequency simplex, different frequency simplex |
| Antenna | Removable |
| Frequency Stability | ±2.5ppm |
| Working Temperature | -20°C ~ +60°C |
| Dimensions | 137 x 60 x 36 mm (approx. 255g) |
| Modulation Mode | F3E |
| Max Frequency Deviation (W/N) | <5KHz / <2.5KHz |
| SNR (W/N) | 45dB / -40dB |
| TX Current | ≤ 1500mA |
| Sensitivity (W/N) | 0.22uV / 0.25uV (12dB SINAD) |
| Intermodulation (W/N) | 65dB / 60dB |
| Audio Distortion | < 5% |
| Audio Output Power | < 1W (16Ω) |
| RX Current | <350mA |
| Standby Current | <70mA |
Note: Specifications are subject to change without prior notice.

Figure 4: UV-88 as a U/V Full Band Handheld Two Way Radio.
5. Initial Setup
5.1. Battery Installation and Charging
- Ensure the radio is powered off.
- Align the battery with the compartment on the back of the radio and slide it into place until it clicks securely.
- To charge, connect the Type-C USB cable to the radio's Type-C port and the other end to the power adaptor. Plug the adaptor into a wall outlet. Alternatively, place the radio in the charger base.
- The indicator light will show charging status. A full charge typically takes several hours.

Figure 5: Charging the UV-88 via Type-C port.
5.2. Antenna Attachment
- Carefully screw the provided antenna onto the antenna connector on top of the radio until it is finger-tight. Do not overtighten.
- For Shortwave (SW) and AM reception, an optional SW/AM antenna may be used.

Figure 6: UV-88 with SW/AM antenna and optional donut antennas.
6. Operating Instructions
6.1. Basic Operation
- Power On/Off: Rotate the Switch/Volume knob clockwise to power on the radio. Rotate counter-clockwise until it clicks to power off.
- Volume Adjustment: Rotate the Switch/Volume knob to adjust the audio output level.
- Frequency/Channel Selection: Use the keypad to directly input frequencies or navigate through channels.
- Transmit (TX): Press and hold the TX Key (PTT) to transmit. Release to receive.
6.2. Key Features and Functions
- 1024 Channels: The radio supports a large number of channels for diverse communication.
- Single/Dual Frequency Display & Standby: Switch between single and dual frequency display modes and utilize dual frequency standby for monitoring two frequencies simultaneously.
- Dynamic Signal Strength Meter: Provides real-time indication of signal strength.
- One-Click Frequency Measurement & Remote Sub-Tone Scan: Quickly measure frequencies and scan for sub-tones.
- Transmit End Tones & MDC1200 Signaling Tone: Features two transmit end tones and an MDC1200 signaling tone (siren sound).
- Editable Device & Channel Names: Manually edit device names (transmittable via MDC1200) and channel names in both Chinese and English.
- NOAA Weather Forecast: Access 11 NOAA weather forecast channels (available only in the United States).
- Aviation AM Signal Reception: Receives aviation AM signals within the 108-136MHz frequency range.
- Power-Saving Mode: Gradually deepens the power-saving ratio over time when enabled.
- Frequency & Channel Scan: Utilize scan functions to find active frequencies or channels.
- Customizable Key Functions: Assign desired functions to programmable keys.
- Spectrum Scan Function: Allows for visual scanning of frequency spectrum.
- VOX (Voice-Activated Transmission): Enables hands-free transmission when voice is detected.
- Monitoring Function: For continuous monitoring of a channel.
- Local & Remote Alarms: Activate local or remote alarms for emergencies.
- Editable Single-Tone Transmission: Customize single-tone transmissions.
- Customizable Boot Image & Startup Prompt: Personalize the radio's startup display.
- DTMF Encoding & Decoding: Supports DTMF encoding for signaling and decoding for display.
- Remote Kill/Disable/Wake-up: Advanced functions for remote control of the radio.
- Type-C Charging: Convenient charging via a Type-C port.
6.3. Specific Frequency Notes
- 27MHz Operation: To use 27MHz, ensure the center antenna is attached.
- AM and USB Modes: To access AM and USB modes, enter the radio state and switch to the shortwave band.
- FM Broadcast: For FM broadcast reception, change directly to 27M under the main working interface.

Figure 7: Fast Copy Frequency feature.

Figure 8: GPS functionality. Note: GPS is not available in Russia.
7. Maintenance
Proper care and maintenance will extend the life of your UV-88 radio:
- Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or solvents.
- Battery Care: Avoid overcharging or completely draining the battery. Store the radio and battery in a cool, dry place when not in use for extended periods.
- Environmental Protection: The radio has an IP45 rating, making it dustproof and water-resistant. However, avoid submerging it in water or exposing it to extreme conditions unnecessarily.
- Antenna Care: Ensure the antenna is securely attached. Do not bend or force the antenna, as this can damage the connector.

Figure 9: UV-88's durable design features.
8. Troubleshooting
If you encounter issues with your UV-88 radio, try the following steps:
- No Power: Ensure the battery is correctly installed and fully charged. Check if the power knob is turned on.
- Cannot Transmit or Receive: Verify the antenna is properly attached. Check if you are on the correct frequency/channel and if the volume is adjusted. Ensure the battery has sufficient charge.
- Poor Audio Quality: Check the microphone and speaker for obstructions. Ensure you are within range of the other radio.
- GPS Not Working (outside Russia): Ensure you are in an open area with a clear view of the sky. Check GPS settings in the menu.
- Radio Not Responding: Try removing and reinserting the battery to perform a soft reset.
If the problem persists after trying these steps, please contact customer support for further assistance.
9. User Tips
Maximize your experience with the UV-88 radio with these helpful tips:
- Program Custom Keys: Utilize the customizable key functions to quickly access your most used features.
- Explore Scan Functions: Use frequency and channel scan to discover active communications or find clear channels.
- Optimal Antenna Use: For best performance on specific bands like SW/AM, consider using the appropriate optional antennas if available.
- Battery Management: To prolong battery life, enable the power-saving mode, especially during periods of low activity.
10. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your seller directly. Keep your proof of purchase for any warranty claims. For technical support or service inquiries, please reach out to the product manufacturer or authorized service center.