NicetyMeter TX15N

Contents

TX15N Wireless Swimming Pool Thermometer User Manual

Model: TX15N | Brand: NicetyMeter

1. Introduction

The NicetyMeter TX15N Wireless Swimming Pool Thermometer is designed to provide accurate and convenient temperature and humidity monitoring for various water environments. This device features an IPX7 waterproof rating for the floating transmitter and supports up to 3 channels for simultaneous monitoring. The receiver displays time, indoor temperature and humidity, and remote water temperature, along with comfort level indicators and a backlight for easy reading.

NicetyMeter TX15N Wireless Swimming Pool Thermometer receiver and floating transmitter
Figure 1: TX15N Wireless Swimming Pool Thermometer (Receiver and Transmitter)

This manual provides detailed instructions for setting up, operating, and maintaining your TX15N thermometer to ensure optimal performance and longevity.

2. Package Contents

Upon opening your package, please ensure all the following items are present:

  • 1x TX15N Receiver Unit
  • 1x TX15N Floating Transmitter Unit
  • 1x Rope (for securing the floating transmitter)
  • 1x User Manual (this document)

Note: 2x AAA batteries for the receiver and 2x AAA batteries for the transmitter are NOT included and must be purchased separately.

3. Product Overview

3.1 Receiver Unit

Diagram of TX15N Receiver Unit with numbered parts
Figure 2: Receiver Unit Components
  1. Touch button (backlight)
  2. Time display
  3. Comfort level display
  4. Remote sensor channel indicator
  5. Transmitter (TX) temperature display
  6. Indoor temperature display
  7. Indoor humidity display
  8. TX temperature MAX. value
  9. TX temperature MIN. value
  10. Battery compartment cover
  11. Wall mounting hole

3.2 Transmitter Unit

Exploded diagram of TX15N Transmitter Unit with lettered parts
Figure 3: Transmitter Unit Components
  1. Temperature sensor
  2. Battery box
  3. Main control module
  4. Waterproof rubber ring
  5. Lens
  6. Locking cover
  7. Positioning pin A
  8. Positioning pin B
  9. Transmitting antenna
  10. °C/°F selection switch
  11. Channel selection switch
  12. LED indicator for signal transmitting
  13. Channel display
  14. Temperature value display

4. Specifications

FeatureSpecification
Brand NameNicetyMeter
Model NumberTX15N
DIY SuppliesElectrical
OriginMainland China (Guangdong)
ApplicationSwimming pool, aquarium, bathtub, fishing pond
TypeWireless, floating type
MaterialPlastic
FunctionTemperature, humidity monitoring
FeatureIPX7 waterproof, 3 channels
Receiver Temperature Range14℉~122℉ (-10℃~50℃)
Receiver Humidity Range20~95%RH
Transmitter Temperature Range-40℉~158℉ (-40℃~70℃)
Temperature Sampling Period (Transmitter)10 seconds
Waterproof Level (Transmitter)IPX7
Transmission Frequency433Mhz
Transmission DistanceUp to 200 ft (60 meters) in open space
Power Supply (Receiver)2 x LR03 size AAA batteries (not included)
Power Supply (Transmitter)2 x LR03 size AAA batteries (not included)

5. Setup Instructions

Follow these steps to set up your wireless pool thermometer:

Four-step diagram showing how to pair the wireless pool thermometer: install batteries in receiver, set channel and unit in transmitter, install batteries in transmitter, and place units together for pairing.
Figure 4: Steps to Pair Wireless Pool Thermometer
  1. Install Batteries in Receiver:

    Open the battery compartment cover (10) on the back of the receiver unit. Insert 2x AAA batteries, ensuring correct polarity (+/-). Close the cover securely.

  2. Prepare Transmitter Unit:

    Carefully unscrew the locking cover (F) of the transmitter unit. Locate the channel selection switch (K) and the °C/°F selection switch (J) inside the main control module (C). Set the desired transmission channel (1, 2, or 3) and the temperature unit (°C or °F).

  3. Install Batteries in Transmitter:

    Insert 2x AAA batteries into the battery box (B) of the transmitter unit, observing correct polarity. Ensure the waterproof rubber ring (D) is properly seated before re-attaching the locking cover (F). Tighten the cover firmly to maintain IPX7 waterproof integrity.

  4. Pairing the Units:

    Place the receiver and the transmitter together, within close proximity (e.g., on a table), for approximately 2-3 minutes. Do not move the units until the connection is established. The receiver will display the remote temperature once paired.

Important Caution: Before placing the digital pool thermometer in the water, please ensure the transmitter cover is tightened securely. Failure to do so may allow water to enter and damage the unit.

6. Operating Instructions

6.1 Backlight Function

Press the touch button (1) on the top of the receiver unit to activate the backlight. The backlight will illuminate the display for approximately 10 seconds, making it easier to read in dim environments.

6.2 Setting Time

To manually set the time on the receiver unit:

  1. In normal display mode, press and hold the "MODE" button (located on the back of the receiver) for 2 seconds. The time format (12/24HR) will begin to blink.
  2. Press the "+" or "-" buttons to adjust the value.
  3. Press the "MODE" button to confirm the setting and move to the next item.
  4. The setting sequence is: TIME format (12/24HR) > HOUR > MINUTE.
  5. After setting the minute, press the "MODE" button again to confirm and exit the setting procedures. The unit will return to normal mode.

6.3 Viewing Min/Max Temperatures

The receiver automatically records the maximum and minimum temperatures for both indoor and remote sensors. To view these values, briefly press the "MEM" button (located on the back of the receiver).

6.4 Clearing Min/Max Temperatures

To clear the recorded maximum and minimum temperature/humidity values:

  1. Press and hold the "MEM" button for 2 seconds.
  2. The display will show "- -.-" for 2 seconds, indicating that the current maximum/minimum values have been deleted.

Note: The memory value of the day will be automatically cleared at 0:00 every night.

6.5 Channel Switching

The receiver supports up to 3 channels. To switch between the remote sensor channels (if you have multiple transmitters):

Briefly press the "+ CH" button (located on the back of the receiver) to cycle through channels 1, 2, and 3. The remote sensor channel indicator (4) will show the currently selected channel.

Receiver displaying indoor temperature and humidity, and remote water temperature from a swimming pool, bathtub, and fish pond, illustrating multi-channel capability.
Figure 5: Multi-Channel Monitoring Example

Note: This product typically includes only one transmitter. Additional transmitters must be purchased separately to utilize the multi-channel feature.

6.6 Water Temperature Comfort Reminder

The receiver provides a visual comfort reminder for the water temperature:

  • LOW: Water temperature is below 68°F (20°C).
  • OK: Water temperature is between 68°F (20°C) and 86°F (30°C).
  • HIGH: Water temperature is above 86°F (30°C).
Child in a pool with the TX15N receiver displaying water temperature and a comfort reminder indicating 'OK' for temperatures between 68°F and 86°F.
Figure 6: Water Temperature Comfort Reminder in Use

7. Maintenance

7.1 Waterproofing

The transmitter unit is IPX7 waterproof, meaning it can be submerged in water up to 1 meter for 30 minutes. However, it is crucial to ensure the locking cover (F) is always tightened securely before placing the transmitter in water. Regularly check the waterproof rubber ring (D) for any signs of wear or damage. If damaged, replace it immediately to prevent water ingress.

7.2 Addressing Water Mist

If you observe water mist or condensation on the inside of the transmitter's lens (E), it indicates that moisture has entered the unit. In this case:

  1. Immediately remove the transmitter from the water.
  2. Unscrew the locking cover (F).
  3. Remove the batteries and allow the internal components to air dry completely in a dry environment.
  4. Once dry, reassemble the unit, ensuring the waterproof rubber ring (D) is correctly seated and the locking cover (F) is tightened firmly.

7.3 Cleaning

Clean both the receiver and transmitter units with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the plastic casing or display. Ensure the receiver unit does not get wet.

8. Troubleshooting

  • No display on receiver: Check if batteries are installed correctly and are not depleted. Replace batteries if necessary.
  • No remote temperature reading:
    • Ensure both receiver and transmitter have fresh batteries.
    • Verify the transmitter's channel selection switch matches the receiver's selected channel.
    • Make sure the transmitter's cover is securely tightened.
    • Reduce the distance between the receiver and transmitter. Obstacles like thick walls or metal structures can interfere with the wireless signal. The maximum transmission distance is up to 200 ft in open space.
    • Re-pair the units by following the pairing steps in Section 5.4.
  • Inaccurate temperature readings:
    • Ensure the transmitter is fully submerged in the water for accurate water temperature readings.
    • Check for water mist inside the transmitter (refer to Section 7.2).
    • Compare readings with another reliable thermometer to verify accuracy.
  • Backlight not working: Check receiver batteries.

9. User Tips

Based on feedback from other users, here are some helpful tips for using your TX15N thermometer:

  • The receiver unit features a small kickstand, allowing it to be placed on a flat surface without needing to be mounted.
  • The display is generally easy to read, and the background colors enhance visibility.
  • Utilize the min/max temperature readouts to track temperature fluctuations over time. Remember that these values reset automatically at midnight or can be manually cleared.
  • When placing the transmitter in a pool or pond, consider tying the included rope to it to prevent it from floating too far away or being lost.

10. Warranty and Support

This NicetyMeter TX15N Wireless Swimming Pool Thermometer comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact the seller or manufacturer directly. Contact information may be available on the product packaging or the seller's store page.

Disclaimer: The manufacturer and seller are not responsible for any damage or injury caused by improper use or modification of this product.

© 2024 NicetyMeter. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.