Introduction
Thank you for purchasing the AIGOSTAR Smart Water Boiler. This appliance is designed for efficient and precise water heating, offering smart control features for your convenience. Please read this manual carefully before use to ensure safe and optimal operation.

AIGOSTAR Smart Water Boiler (Black)

AIGOSTAR Smart Water Boiler (White)
Important Safety Instructions
- Read all instructions before using the appliance.
- Do not immerse the kettle, power base, cord, or plug in water or other liquids.
- Ensure the appliance is placed on a stable, flat, heat-resistant surface.
- Do not operate the kettle if the cord or plug is damaged, or if the appliance malfunctions or has been damaged in any manner.
- Keep out of reach of children. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- Do not use outdoors.
- Do not fill above the MAX line or below the MIN line to prevent boiling dry or splashing.
- Always ensure the lid is securely closed during operation.
- The kettle features an automatic shut-off and boil-dry protection system for safety.
- The exterior of the kettle may become hot during use. Use the handle only.
Setup and First Use
Unboxing and Initial Cleaning
- Carefully remove all packaging materials from the kettle and its base.
- Wipe the exterior of the kettle with a damp cloth.
- Fill the kettle with clean water to the MAX level.
- Boil the water (see "Operating Instructions").
- Discard the boiled water. Repeat this process 2-3 times to remove any manufacturing residues.
Placement and Power Connection
- Place the power base on a dry, flat, and stable surface, away from the edge of the countertop.
- Ensure the power cord is not dangling or in contact with hot surfaces.
- Plug the power cord into a grounded electrical outlet (230V/50Hz).
Smart Features Setup (Wi-Fi, App, Voice Control)
To utilize the smart features, download the free AigoSmart app on your smartphone.
- Download the "AigoSmart" app from your device's app store (iOS or Android).
- Register or log in to your AigoSmart account.
- Ensure your smartphone is connected to a 2.4GHz Wi-Fi network (5GHz networks are not supported).
- Place the kettle on its power base and ensure it is plugged in.
- Follow the in-app instructions to add your AIGOSTAR Smart Water Boiler. This typically involves putting the kettle into pairing mode (refer to the kettle's display or buttons for specific instructions, usually a long press on a Wi-Fi or pairing button).
- Once connected to the app, you can link your AigoSmart account to Amazon Alexa or Google Home through their respective apps for voice control.

Smart Control via AigoSmart App: Schedule Start, Keep Warm, DIY Temperature
Operating Instructions
Basic Water Boiling
- Remove the kettle from its base.
- Open the lid and fill the kettle with the desired amount of fresh water. Do not exceed the MAX fill line (1.7L) or go below the MIN fill line.
- Close the lid securely.
- Place the kettle back onto its power base.
- Press the power button on the kettle's handle or base to start boiling. The indicator light will illuminate.
- The kettle will automatically shut off once the water reaches boiling point (100°C).
Temperature Adjustment (40°C - 100°C)
The AIGOSTAR Smart Water Boiler allows you to select specific temperatures for different beverages.
- Fill the kettle with water as described above.
- Place the kettle on its base.
- Use the temperature selection buttons on the kettle's handle (or the AigoSmart app) to choose your desired temperature (e.g., 40°C, 70°C, 80°C, 90°C, 100°C).
- Press the start button. The kettle will heat the water to the selected temperature and then automatically shut off.

5 Temperature Adjustable Settings (e.g., >40°C, 40-70°C, 70-80°C, 80-90°C, 90-100°C)
Keep Warm Function
This function maintains the water at a selected temperature for an extended period.
- Activate the "Keep Warm" function via the AigoSmart app or the kettle's control panel after selecting your desired temperature.
- The kettle can maintain the temperature for 1-12 hours.
Schedule Start and DIY Temperature (via AigoSmart App)
- Schedule Start: Use the AigoSmart app to set a specific time for the kettle to start heating water.
- DIY Temperature: The app allows for more precise temperature customization beyond the preset options on the kettle.
Voice Control (Alexa & Google Home)
Once linked, you can control your kettle using voice commands:
- "Alexa, turn on the kettle."
- "Hey Google, set the kettle temperature to 80 degrees."
- "Alexa, keep the kettle warm."
Care and Maintenance
Cleaning the Kettle
- Always unplug the kettle and allow it to cool completely before cleaning.
- Wipe the exterior of the kettle with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
- The interior can be cleaned with a soft brush or sponge.
- Do not immerse the kettle or its power base in water.
Descaling
Regular descaling is recommended to maintain performance, especially in hard water areas.
- Fill the kettle with a mixture of one part white vinegar and two parts water.
- Boil the mixture and let it stand for at least 30 minutes, or longer if scale is heavy.
- Discard the mixture and rinse the kettle thoroughly with fresh water several times.
- For stubborn scale, a commercial descaling agent designed for kettles can be used following the product's instructions.
Storage
When not in use, store the kettle in a dry place, away from direct sunlight and moisture. Ensure the power cord is neatly wrapped around the base if applicable.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Kettle does not turn on. | Not plugged in; power outage; kettle not properly seated on base. | Check power connection; ensure kettle is correctly placed on base. |
| Water not heating. | Boil-dry protection activated (no water); faulty heating element. | Ensure kettle has sufficient water; if problem persists, contact support. |
| App connection failed. | Incorrect Wi-Fi password; 5GHz Wi-Fi network; kettle not in pairing mode. | Verify Wi-Fi password; ensure 2.4GHz network; put kettle in pairing mode as per app instructions. |
| Voice control not working. | AigoSmart account not linked to Alexa/Google Home; incorrect commands. | Check linking in Alexa/Google Home app; use correct voice commands. |
| Water tastes strange or has residue. | New kettle residue; limescale buildup. | Perform initial cleaning steps; descale the kettle. |
Specifications
| Feature | Detail |
|---|---|
| Brand | AIGOSTAR |
| Model | Smart Water Boiler |
| Capacity | 1.7 Liters |
| Power | 2200W |
| Voltage | 230V/50Hz |
| Temperature Range | 40°C - 100°C (Adjustable) |
| Keep Warm Function | 1-12 Hours |
| Connectivity | Wi-Fi (2.4GHz only) |
| Voice Control | Amazon Alexa, Google Home |
| Material | Glass (Inner), Double-Wall Design |
| Safety Features | Automatic Shut-off, Boil-Dry Protection |
| Base | 360 Degree Rotational Base |
| Certification | CE |
| Origin | Mainland China |

Double-Wall Design for Safer Touch
Warranty and Support
AIGOSTAR products are manufactured to the highest quality standards. In the unlikely event of any defect arising from faulty materials or workmanship, your product is covered by a standard manufacturer's warranty from the date of purchase.
Please retain your proof of purchase. For warranty claims, technical support, or any questions regarding your AIGOSTAR Smart Water Boiler, please contact the retailer or AIGOSTAR customer service directly. Contact information can usually be found on the product packaging or the official AIGOSTAR website.