HP DPS-320QB B

Contents

User Manual: HP Elite 600 800 G1 Power Supply

Model: DPS-320QB B (Part Numbers: 702304-001, 702452-001)

Introduction

This manual provides essential information for the installation, operation, and maintenance of your HP Elite 600 800 G1 Power Supply. Please read these instructions carefully before proceeding with installation to ensure proper functionality and safety.

Safety Information

  • Always disconnect power from the computer before installing or removing the power supply.
  • Ensure proper grounding to prevent electrical shock.
  • Handle the power supply with care to avoid damage to components or connectors.
  • Do not open the power supply casing; there are no user-serviceable parts inside and dangerous voltages may be present.

Setup and Installation

Before installation, verify that this power supply is compatible with your specific HP Elite 600 or 800 G1 model. Compare the physical appearance, connector types (6+4P), and part numbers (DPS-320QB B, 702304-001, 702452-001) with your existing unit or system requirements.

Power supply unit with various cables

Figure 1: Power supply unit showing the main body and connected cables.

  1. Preparation: Disconnect all power cables from your computer. Open the computer case to access the existing power supply.
  2. Removal of Old PSU: Disconnect all cables from the motherboard and other components. Unscrew and remove the old power supply unit.
  3. Inspection: Before installing the new power supply, visually inspect it for any signs of damage, such as dents, bent pins, or loose components. Ensure all electronic insulation is intact.
  4. Installation of New PSU: Carefully place the new power supply into the designated bay. Secure it with screws.
  5. Cable Connection: Connect the 6+4P main power connectors to the motherboard. Connect other necessary cables (e.g., SATA, peripheral) to your components. Ensure all connections are firm and correctly oriented.
  6. Close Case: Once all connections are made, close the computer case.
  7. Power On: Reconnect the power cable to the computer and a power outlet. Power on the system.

Operating Instructions

The power supply operates automatically once correctly installed and connected to a power source. It converts AC power from the wall outlet into DC power required by your computer's components.

Initial System Check: After installation, perform the following checks to ensure proper system function:

  • Verify that all internal and external connectors (e.g., LCD display, memory modules, DVD drive, network connection, audio, USB, SD card reader) are properly seated.
  • Check the 3.3V CMOS battery.
  • Ensure the main battery (if applicable) is charging and discharging correctly.
  • Run a full 3D application or system diagnostic to stress test the system.
  • Restart the system at least two times to confirm stability.

Maintenance

The power supply unit is designed for minimal maintenance. To ensure longevity and optimal performance:

  • Keep the computer's interior clean and free of dust. Dust accumulation can hinder airflow and lead to overheating.
  • Ensure adequate ventilation around the computer to allow for proper heat dissipation from the power supply's fan.
  • Do not block the air vents on the power supply unit.
Side view of power supply unit showing ventilation grille and power input

Figure 2: Side view of the power supply unit, highlighting the ventilation grille and AC power input.

Troubleshooting

If your computer experiences power-related issues after installing the new power supply, consider the following:

  • No Power: Double-check all power connections, especially the main 6+4P connector to the motherboard and the AC power cable to the wall outlet.
  • System Instability/Random Shutdowns: Ensure the power supply is securely mounted and that there are no loose fittings, rust, or signs of rot on the chassis that could affect heat dissipation.
  • Component Malfunction: Verify that all peripheral connectors (e.g., for hard drives, optical drives) are correctly attached.
  • Compatibility Issues: Re-verify the part numbers and model (DPS-320QB B, 702304-001, 702452-001) against your computer's requirements.
  • Visual Inspection: Check for any dirty marks, dust, or signs of tin soldering on the board that might indicate a manufacturing defect or damage.

Specifications

Product label with detailed specifications

Figure 3: Product label displaying model, part numbers, and electrical specifications.

HP Elite 600 800 G1 Power Supply Specifications
Feature Detail
Model DPS-320QB B
Part Numbers 702304-001, 702452-001
Compatible Brand HP
Max Power Output 320W
Input Voltage 100-240V~
Input Current 4.5A
Input Frequency 50-60Hz
Output +12VCPU 16A
Output +12VMAIN 16A
Output +12VSB 0.15A
Connectors 6+4P (Main Power)
Item Type (as listed) Laptop DC Power Jack (Note: This product is a desktop power supply unit, not a DC power jack.)

Warranty and Support

This product comes with a 30-day warranty from the date of receipt. If you encounter any issues within this period, please contact the seller immediately for assistance.

For support or warranty claims, please contact the seller via Ali-Message. Business hours are typically 9:00 AM - 8:00 PM Beijing time, Monday to Friday. Responses are usually provided within 24 hours (excluding weekends and holidays).

User Tips

  • Verify Compatibility: Always compare the product pictures and codes (model numbers, part numbers) with your original power supply or system requirements before purchasing and installing to avoid compatibility issues.
  • Careful Handling: Electronic components are sensitive. Handle the power supply carefully during installation to prevent static discharge or physical damage.
  • Secure Connections: Ensure all power connectors are fully seated and locked into place to prevent intermittent power issues.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.