Hirisi S9

Contents

Hirisi S9 Wireless Carp Fishing Bite Alarm Set

Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe and effective use of your Hirisi S9 Wireless Carp Fishing Bite Alarm Set. Please read all instructions carefully before operation and retain this manual for future reference.

Hirisi S9 Wireless Carp Fishing Bite Alarm Set with multiple alarms and a receiver
The Hirisi S9 Wireless Carp Fishing Bite Alarm Set, typically including 1 receiver and 3 or 4 bite alarms.

The Hirisi S9 set is designed to provide reliable bite indication for carp fishing, featuring wireless communication, adjustable settings, and durable construction.

Product Video Overview

Watch this video for a visual demonstration of the Hirisi S9 Bite Alarm Set's features and operation.

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.

3. Product Overview

Components

The Hirisi S9 set typically includes:

  • Wireless Bite Alarms (3 or 4 units)
  • Wireless Receiver (1 unit)
  • Carrying Case
  • Small screwdriver (for battery compartment)
Hirisi S9-4 set in a protective carrying case
Hirisi S9-4 set (1 receiver + 4 alarms) in its protective carrying case.

Key Features

  • Waterproof Design: Ensures durability in various weather conditions.
  • 2-Way Remote Control: Allows for easy adjustment of settings directly from the receiver.
  • Dynamic Indicator Lights: Bite alarms feature a white LED and a multi-colored warning LED. The receiver has 6 LED indicator lights for at-a-glance status.
  • Adjustable Sensitivity, Tone, and Volume: Customize settings to suit different fishing conditions.
  • 2.5mm Jack: For connecting external devices like illuminated swingers.
  • High-Output Speakers: Ensures clear and powerful audio alerts from both alarms and receiver.

4. Setup

4.1 Before First Use

  • Check the main unit and all accessories for damage.
  • Remove all packaging and protective materials.
  • Install 9V batteries into both the bite alarms and the receiver. Use a small screwdriver to open the battery compartments.
Diagram showing 9V battery installation for both bite alarm and receiver
Both the bite alarms and the receiver require 9V batteries for operation.

4.2 Device Installation

  1. Fix the bite alarm securely on your rod rest or bankstick. Ensure the adjusting knob is tightened to prevent movement.
  2. Route your fishing line and place it against the sensing contact of the alarm. This ensures sensitive detection of bites.
Bite alarm mounted on a rod rest with fishing line in place
Proper installation of the bite alarm on a rod rest with the fishing line engaged.
Close-up of the bite alarm's line sensor and controls
Ensure the fishing line is correctly positioned against the sensing contact for optimal performance.

5. Operating Instructions

5.1 Sensitivity Adjustment (S)

  • Turn the sensitivity knob (labeled 'S') clockwise to increase sensitivity.
  • Turn the sensitivity knob counterclockwise to decrease sensitivity.
  • Adjust according to fishing conditions and fish activity.
Close-up of bite alarm controls showing the 'S' button for sensitivity
The 'S' button on the bite alarm controls sensitivity.

5.2 Volume & Tone Setting (V & T)

  • Use the 'T' button on the alarm to adjust the tone.
  • Use the 'V' button on the alarm to adjust the volume.
  • On the receiver, use the 'V-' and 'V+' buttons for seamless volume adjustments.
  • Switch sound and light alert modes as needed to ensure clear alarm prompts.
Close-up of receiver controls showing S, V, T buttons and gear icon
The receiver allows for adjustment of sensitivity (S), volume (V), and tone (T).
Close-up of receiver volume adjustment buttons (V+, V-)
Dedicated V- and V+ buttons on the receiver for volume control.

5.3 Dynamic Indicator Lights

  • The bite alarms feature a white LED and a multi-colored warning LED.
  • Press the 'S' and 'T' buttons simultaneously on the alarm to change the color of the warning LED light.
  • The receiver comes with 6 LED Indicator Lights, providing at-a-glance information about the status of the fishing alarms.
Bite alarm showing a white LED indicator
Bite alarm with white LED indicator.
Bite alarm showing a multi-colored LED indicator
Bite alarm with multi-colored LED indicator.
Receiver unit with 6 LED indicator lights
The receiver displays the status of connected alarms via 6 LED lights.

5.4 Fishing Operation

  1. After casting your line, tighten it and ensure it is properly in contact with the alarm's sensor.
  2. Wait for bites. The device will activate sound and light alarms once a fish pulls the line.
  3. When the alarm goes off, lift the rod firmly to hook the fish.
  4. Control the reel drag properly to prevent line breakage and fish escape.
Bite alarm with fishing line passing through its sensor
Ensure the fishing line is correctly positioned through the alarm's sensor.

6. Maintenance

  • After each use, turn off the power to both the alarms and the receiver.
  • Wipe off any water, dirt, and debris from the devices using a soft, dry cloth.
  • Reset the sensitivity knob to a neutral position for storage.
  • Store the product in a dry and cool place, preferably in its original carrying case, to protect it from damage.

7. Troubleshooting

  • No Power: Check if the 9V batteries are correctly installed and have sufficient charge. Replace if necessary.
  • No Signal/Poor Range: Ensure the alarms and receiver are within the specified operating range (up to 150m). Check for obstructions or strong electromagnetic interference.
  • False Alarms: Reduce the sensitivity setting ('S' button) to prevent activation from wind, current, or minor line movements.
  • No Sound: Check the volume settings ('V' button on alarms, 'V+'/'V-' on receiver) to ensure they are not muted or set too low.
  • LEDs Not Working: Check battery levels. If only specific LEDs are affected, contact support.

8. Specifications

FeatureSpecification
ModelS9
Batch/Serial NumberHRS202606181
TypeFish Bell/Alarm
MaterialABS
Wireless RangeUp to 150 meters (2-way remote control)
Power Source9V Battery (for both alarms and receiver)
OriginMainland China

9. User Tips

Based on feedback from other anglers, here are some tips to enhance your experience with the Hirisi S9 Bite Alarm Set:

  • Optimize Sensitivity: Experiment with the sensitivity settings to find the ideal level for your fishing environment. Higher sensitivity is great for shy bites, while lower sensitivity can reduce false alarms in windy conditions.
  • Utilize Range: The system offers a good wireless range (up to 150m). Position your receiver strategically to maintain a clear signal, especially if you're moving away from your rods.
  • Volume Control: The alarms and receiver are capable of being very loud. Adjust the volume to a comfortable level that ensures you hear bites without disturbing others or causing discomfort.
  • Battery Management: Always carry spare 9V batteries, especially for longer fishing trips, to ensure continuous operation.
  • Regular Cleaning: Wiping down the units after each use helps maintain their waterproof integrity and extends their lifespan.

10. Warranty & Support

For any product-related inquiries or support, please contact the manufacturer or authorized representative:

  • Manufacturer: SUCCESS COURIER SL, CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid.
  • Manufacturer Contact: successservice2@hotmail.com / +34-910602659
  • EU Authorized Representative: Ningbo hai ruisi outdoor products co., ltd, Room 309, building 1, no. 188, wanjin road, haishu district, ningbo city, zhejiang province.
  • EU Representative Contact: service@hirisi.com.cn

© 2024 Hirisi. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.