1. Introduction
The ANYFAR Wireless Carplay Android Auto Module is a retrofit kit designed to add CarPlay and Android Auto functionality to your Mercedes-Benz vehicle. This module integrates seamlessly with your existing display and retains the use of original car controls, such as the rotary controller and steering wheel buttons, providing an OEM-like experience.
2. Product Features
- CarPlay Video Interface specifically for Mercedes-Benz NTG5.0/5.1 System head units with 7.4”, 8.4”, or 12.3” screens.
- Built-in 2.4G and 5.8G WIFI for stable connection and Bluetooth 5.0 Technology.
- Supports CarPlay, Android Auto, and USB Flash drive playback.
- Control via steering wheel controls, rotary controller, and voice control (e.g., "Hey Siri...").
- Compatible with GPS navigation apps like Google Maps, Waze, and Apple Maps, offering live traffic information.
- Built-in DSP for fully adjustable Audio EQ, ensuring optimal audio quality.
- Includes 2 RCA inputs, allowing connection of rear and right PAL, NTSC AHD cameras.
- Supports HD 360 panoramic cameras with Dynamic Guidance Lines and Parking Distance Control, maintaining OEM parking style.
- Plug-and-play, non-destructive installation without requiring wire breaks.
- Seamlessly switch between CarPlay display and original factory controls at any time.
3. Compatible Models
This module is compatible with Mercedes-Benz vehicles equipped with the NTG5.0 or NTG5.1 system from 2015-2018. It is NOT compatible with NTG4.0, NTG4.5, or NTG4.7 systems.
To confirm compatibility, please check your car's NTG system and screen size:
The following table lists suitable Mercedes-Benz models and their compatible years:
| Class | Chassis Code | Years |
|---|---|---|
| A Class | W176 | 2016-2018 |
| B Class | W246 | 2016-2018 |
| CLA Class | C117 | 2016-2018 |
| CLS Class | W218 | 2015-2016 |
| E Class sedan | W212 | 2015 |
| E Class coupe | C207 A207 | 2015 |
| G Class | W463 | 2016-2017 |
| GLA Class | X156 | 2016-2018 |
| GLC Class | X253 C253 | 2015-2018 |
| GLE GLS Class | W167 X166 | 2016-2018 |
| SLK | R172 | 2016-2018 |
| S Class | W222 | 2014-2018 |
| CL Class | W216 C216 | 2014-2018 |
| V Class | W447 | 2015-2018 |
| X Class | W470 | 2015-2018 |
4. Package Contents
The package includes the main module and the following accessories:
- Main Module (Dimensions: 13.6cm L x 7cm W x 2.2cm H)
- Power Cable
- LVDS Cable (1 pc)
- WiFi Antenna
5. Installation Guide
5.1 Toggle Switch Setup
Before installation, set the DIP switches on the module according to your car model and desired screen resolution. Refer to the diagram below for the location of the DIP switches and the table for settings.
| 1 | 2 | Car Model | 3 | 4 | Screen Size |
|---|---|---|---|---|---|
| OFF | OFF | C/GLC/V/S | OFF | ON | 800*480 (7.4"/8.4") |
| OFF | ON | A/B/CLA/CLS/GLA/GLE/GLS/E | ON | OFF | 960*540 (8.4") |
| ON | OFF | ON | ON | 1440*540 (12.3") |
5.2 Cable Connection Chart
Carefully follow the wiring diagram below to connect all cables. Ensure connections are secure and correct to avoid damage.
6. Operation Instructions
6.1 Functional Overview
The module integrates CarPlay and Android Auto, allowing interaction with your iPhone or Android device through the central control knob and voice commands. It supports both wireless and wired connections for CarPlay and Android Auto, enabling access to phone functions, information, navigation, and music. The smart module also supports reversing video input, allowing connection of rear-view cameras.
6.2 Wireless CarPlay Connection Method
- Open the system's Wireless CarPlay connection settings.
- On your phone, turn on Bluetooth and Wi-Fi and keep them active.
- Select the Bluetooth device name (e.g., “CX_BT XXXX”) on your phone. A pairing request will pop up; confirm to use CarPlay.
6.3 Wireless Android Auto Connection Method
- Open the system's Wireless Android Auto connection settings.
- On your phone, turn on Bluetooth and Wi-Fi and keep them active. Select the Bluetooth device name (e.g., “CX_BT XXXX”) on your phone to pair. After successful Bluetooth pairing, follow the on-screen prompts for the Android Auto connection process.
6.4 Audio Settings
To ensure proper audio output, navigate to the module's audio settings:
- Go to Setup > Audio settings.
- Enable "Use the original Bluetooth audio" option.
- Connect your phone's Bluetooth to the car's Bluetooth (MB Bluetooth).
- Keep the car's Bluetooth Audio interface active.
- On your phone, select the car's Bluetooth as the audio source.
6.5 System Switching
After all cables are connected, you can switch between the original NTG 5 car interface and the CarPlay/Android Auto interface by long-pressing the "Back" button on the central control knob.
6.6 Steering Wheel Button Control
The module supports control via the original steering wheel buttons. Note that operation methods may vary slightly depending on your specific car model. Consult customer service if needed.
- Rotary Controller:
- Long press to switch system.
- Short press to confirm; long press to confirm to activate voice control.
- Right dial 15 seconds to reset.
- Steering Wheel Buttons:
- Long press to switch system.
- Short press to answer the phone.
- Short press to hang up or activate.
- Short press to increase or decrease volume.
- Long press to reset the system.
6.7 Camera Function
The module supports various camera inputs:
- Supports factory original reverse camera and parking radar.
- Supports aftermarket reverse camera and 360 camera systems.
7. Specifications
- Module Dimensions (approx.): 13.6 cm (Length) x 7 cm (Width) x 2.2 cm (Height)
- Package Weight (approx.): 0.79 kg
- Wireless Connectivity: 2.4G and 5.8G Wi-Fi, Bluetooth 5.0
- Camera Inputs: 2 RCA inputs (supports PAL, NTSC AHD rear and right cameras)
- Display Compatibility: 7.4”, 8.4”, 12.3” screens
- System Compatibility: Mercedes-Benz NTG5.0 / NTG5.1
8. Troubleshooting
- Compatibility Issues: This module is only compatible with NTG5.0/5.1 systems. It will NOT work with NTG4.0, NTG4.5, or NTG4.7. Always verify your car's system version before installation.
- Operation Differences: Due to variations across car models, specific operation methods for controls might differ. If you encounter difficulties, please consult customer service.
- Installation Uncertainty: If you are unsure about your vehicle's compatibility or the installation process, contact customer support with photos of your car’s center console for guidance.
9. User Tips
- Pre-Installation Check: Always confirm your car's NTG system version (NTG5.0/5.1) and screen size using the provided diagrams before installation. If unsure, consult customer service with photos of your car's center console.
- DIP Switch Accuracy: Double-check the DIP switch settings against the provided table to ensure correct configuration for your specific car model and screen resolution. Incorrect settings can lead to display issues.
10. Warranty and Support
The ANYFAR Wireless Carplay Android Auto Module comes with a 365-day warranty, ensuring quality and reliability.
- Warranty: 365 Day Warranty
- Technical Support: 1-on-1 Engineer Services are available for technical assistance.
For further detailed instructions and support, a comprehensive user manual in PDF format is available:
